Created attachment 734 [details]
Screenshot+signal capture files

I'm using a DsLogic analyzer and PulseView to look at the output from an ADAU1452 DSP. The DSP is programmed to output 8 channels, 32 bit on the 3 TDM signal lines. I'm including a screenshot from Pulseview and the signal capture files. In this example, the first 6 channels (Ch1-6) are muted and there is an audio signal only on the last 2 channels (Ch7 and Ch8)

There are 2 problems with the current decoder. Actually one is a problem, the other a missing feature (made worse by the first problem):
*) the current decoder uses a confusing mix of channel numbers. What is decoded as Channel 8 is actually shown on the TDM Audio: Ch0 line. It looks as if the decoder is confused about using an Index0 vs Index1 convention. Most technical documentation for TDM seems to use the Ch1-ChN convention. So displaying Channel 1-8 makes sense, but it's confusing to see Channel 8 at the top of the display in the Pulseview window (see screenshot)
*) my signal uses a falling edge on the "frame" input as start of Ch1. The current decoder always assumes that Ch1 is marked by a rising edge, so the display is shifted by 4 channels (i.e what is channel 7 and 8 for me, is decoded as Ch3 and Ch4). In the decoder there is an option to use rising or falling edges, but that is only for the data portion. It would be very helpful to be able to also define the option of a "positive" and "negative" frame, so that Ch1 is really Ch1 and not Ch5

Please let me know if you prefer to have this bug split into a bug and a feature request