Created attachment 346 [details] pulseview Good day! After updating the ports, I can not work with my logical analyzer. Scanning detects my device, but does not want to work with it. My system: FreeBSD 11.1-RELEASE-p2 amd64 usbconfig: ugen2.2: <sigrok fx2lafw> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (100mA) usbconfig -u 2 -a 2 dump_device_desc ugen2.2: <sigrok fx2lafw> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x00ff <Vendor specific> bDeviceSubClass = 0x00ff bDeviceProtocol = 0x00ff bMaxPacketSize0 = 0x0040 idVendor = 0x08a9 idProduct = 0x0014 bcdDevice = 0x0001 iManufacturer = 0x0001 <sigrok> iProduct = 0x0002 <fx2lafw> iSerialNumber = 0x0003 <CWAV USBee AX> bNumConfigurations = 0x0001 With old version(0.2.0) work normaly
Hi, you're now using the libsigrok 0.5.0 release it seems; this uses different fx2lafw firmware files than older releases. Are you sure you're also using the files from sigrok-firmware-fx2lafw 0.1.5? See here for the downloads in case they're not in ports (the BSD port packages are not maintained by us, please file bugs there if needed): https://sigrok.org/wiki/Downloads
Good day! pkg info | grep sigro libsigrok-0.5.0 Framework for hardware logic analyzers, core library libsigrokdecode-0.5.0 Framework for hardware logic analyzers, protocol decoders library sigrok-cli-0.7.0 Framework for hardware logic analyzers, CLI client sigrok-firmware-20150123 Sigrok firmware sigrok-firmware-fx2lafw-0.1.5 Cypress FX2 firmware for hardware logic analyzers sigrok-firmware-utils-20140418_1 Sigrok firmware extraction utils I updated all the necessary ports to the current versions
It's still not working, I assume? If so, can you please attach a "sigrok-cli --scan -l 5" output (after attaching the device to USB freshly, so that the firmware upload attempt is included). Thanks! Also, what is "JHA"? Is that a vendor name? Where did you buy the device?
Good day! I don't know about vendor. I bought on aliexpress. A year ago. ~ % sigrok-cli --scan -l 5 sr: [00:00.000001] log: libsigrok loglevel set to 5. sr: [00:00.000021] backend: libsigrok 0.5.0/4:0:0 (rt: 0.5.0/4:0:0). sr: [00:00.000044] backend: Libs: glib 2.50.2 (rt: 2.50.2/5002:2), libzip 1.3.0, libserialport 0.1.1/1:0:1 (rt: 0.1.1/1:0:1), libusb-1.0 , libftdi 1.4, librevisa 0.0.20130412. sr: [00:00.000057] backend: Host: amd64-portbld-freebsd11.0, little-endian. sr: [00:00.000062] backend: SCPI backends: TCP, RPC, serial, VISA, USBTMC. sr: [00:00.000080] backend: Sanity-checking all drivers. sr: [00:00.000087] backend: Sanity-checking all input modules. sr: [00:00.000090] backend: Sanity-checking all output modules. sr: [00:00.000093] backend: Sanity-checking all transform modules. srd: libsigrokdecode loglevel set to 5. sr: [00:00.000136] hwdriver: Scan of 'agilent-dmm' found 0 devices. sr: [00:00.000141] hwdriver: Scan of 'appa-55ii' found 0 devices. sr: [00:00.000145] hwdriver: Scan of 'arachnid-labs-re-load-pro' found 0 devices. sr: [00:00.000361] hwdriver: Scan of 'asix-sigma' found 0 devices. sr: [00:00.000367] hwdriver: Scan of 'atten-pps3203' found 0 devices. sr: [00:00.000385] hwdriver: Scan of 'beaglelogic' found 0 devices. sr: [00:00.000437] usb: Trying to find USB device with VID:PID = 0820:0001. sr: [00:00.000573] usb: Found 0 device(s). sr: [00:00.000578] hwdriver: Scan of 'brymen-bm86x' found 0 devices. sr: [00:00.000581] hwdriver: Scan of 'brymen-bm857' found 0 devices. sr: [00:00.000744] hwdriver: Scan of 'cem-dt-885x' found 0 devices. sr: [00:00.000750] hwdriver: Scan of 'center-309' found 0 devices. sr: [00:00.000753] hwdriver: Scan of 'voltcraft-k204' found 0 devices. sr: [00:00.000939] la8/la16: Unknown iProduct string 'EHCI root HUB'. sr: [00:00.000969] la8/la16: Unknown iProduct string 'EHCI root HUB'. sr: [00:00.000994] la8/la16: Unknown iProduct string ''. sr: [00:00.001019] la8/la16: Unknown iProduct string ''. sr: [00:00.003618] la8/la16: Unknown iProduct string 'Integrated Smart Card Reader'. sr: [00:00.071458] la8/la16: Unknown iProduct string 'Logitech Wireless Headset'. sr: [00:00.072636] la8/la16: Unknown iProduct string 'Biometric Coprocessor'. sr: [00:00.074743] la8/la16: Unknown iProduct string 'BCM20702A0'. sr: [00:00.075866] la8/la16: Unknown iProduct string 'Integrated Camera'. sr: [00:00.075934] la8/la16: Unknown iProduct string ''. sr: [00:00.075951] hwdriver: Scan of 'chronovu-la' found 0 devices. sr: [00:00.075958] hwdriver: Scan of 'colead-slm' found 0 devices. sr: [00:00.075961] hwdriver: Scan of 'conrad-digi-35-cpu' found 0 devices. sr: [00:00.076009] hwdriver: Scan of 'demo' found 1 devices. sr: [00:00.076036] hwdriver: Scan of 'fluke-dmm' found 0 devices. sr: [00:00.076196] ftdi-la: Number of FTDI devices found: 0 sr: [00:00.076210] hwdriver: Scan of 'ftdi-la' found 0 devices. sr: [00:00.076518] ezusb: uploading firmware to device on 0.7 sr: [00:00.076586] ezusb: setting CPU reset mode on... sr: [00:00.076979] resource: Attempt to open '/home/ark/.local/share/sigrok-firmware/fx2lafw-cwav-usbeeax.fw' failed: No such file or directory sr: [00:00.077043] resource: Opened '/usr/local/share/sigrok-firmware/fx2lafw-cwav-usbeeax.fw'. sr: [00:00.077090] ezusb: Uploading firmware 'fx2lafw-cwav-usbeeax.fw'. sr: [00:00.077602] ezusb: Uploaded 4096 bytes. sr: [00:00.078099] ezusb: Uploaded 4024 bytes. sr: [00:00.078109] ezusb: Firmware upload done. sr: [00:00.078114] ezusb: setting CPU reset mode off... sr: [00:00.078253] hwdriver: Scan of 'fx2lafw' found 1 devices. sr: [00:00.078265] gmc-mh-1x-2x: scan_1x_2x_rs232() called! sr: [00:00.078281] hwdriver: Scan of 'gmc-mh-1x-2x-rs232' found 0 devices. sr: [00:00.078284] gmc-mh-1x-2x: scan_2x_bd232() called! sr: [00:00.078287] hwdriver: Scan of 'gmc-mh-2x-bd232' found 0 devices. sr: [00:00.078617] scpi_usbtmc: Found 0 device(s). sr: [00:00.078717] hwdriver: Scan of 'gwinstek-gds-800' found 0 devices. sr: [00:00.079024] scpi_usbtmc: Found 0 device(s). sr: [00:00.079093] hwdriver: Scan of 'hameg-hmo' found 0 devices. sr: [00:00.082924] hwdriver: Scan of 'hantek-6xxx' found 0 devices. sr: [00:00.083245] hwdriver: Scan of 'hantek-dso' found 0 devices. sr: [00:00.083522] scpi_usbtmc: Found 0 device(s). sr: [00:00.083607] hwdriver: Scan of 'hp-3457a' found 0 devices. sr: [00:00.083632] usb: Trying to find USB device with VID:PID = 20a0:4123. sr: [00:00.083746] usb: Found 0 device(s). sr: [00:00.083751] hwdriver: Scan of 'ikalogic-scanalogic2' found 0 devices. sr: [00:00.083922] hwdriver: Scan of 'ikalogic-scanaplus' found 0 devices. sr: [00:00.083935] usb: Trying to find USB device with VID:PID = 1041:8101. sr: [00:00.084049] usb: Found 0 device(s). sr: [00:00.084054] hwdriver: Scan of 'kecheng-kc-330b' found 0 devices. sr: [00:00.084058] hwdriver: Scan of 'kern-ew-6200-2nm' found 0 devices. sr: [00:00.084062] hwdriver: Scan of 'korad-kaxxxxp' found 0 devices. sr: [00:00.084065] hwdriver: Scan of 'lascar-el-usb' found 0 devices. sr: [00:00.084174] hwdriver: Scan of 'lecroy-logicstudio' found 0 devices. sr: [00:00.084446] scpi_usbtmc: Found 0 device(s). sr: [00:00.084516] hwdriver: Scan of 'lecroy-xstream' found 0 devices. sr: [00:00.084521] hwdriver: Scan of 'manson-hcs-3xxx' found 0 devices. sr: [00:00.084564] hwdriver: Scan of 'maynuo-m97' found 0 devices. sr: [00:00.084570] hwdriver: Scan of 'mic-98581' found 0 devices. sr: [00:00.084573] hwdriver: Scan of 'mic-98583' found 0 devices. sr: [00:00.084576] motech-lps-30x: scan() called! sr: [00:00.084578] serial: No serial device specified. sr: [00:00.084580] hwdriver: Scan of 'motech-lps-301' found 0 devices. sr: [00:00.084584] hwdriver: Scan of 'norma-dmm' found 0 devices. sr: [00:00.084586] hwdriver: Scan of 'siemens-b102x' found 0 devices. sr: [00:00.084590] hwdriver: Scan of 'ols' found 0 devices. sr: [00:00.084593] hwdriver: Scan of 'pce-322a' found 0 devices. sr: [00:00.084613] p-ols: FTDI chip interface B set successfully. sr: [00:00.084730] hwdriver: Scan of 'p-ols' found 0 devices. sr: [00:00.085002] scpi_usbtmc: Found 0 device(s). sr: [00:00.085071] hwdriver: Scan of 'rigol-ds' found 0 devices. sr: [00:00.085341] scpi_usbtmc: Found 0 device(s). sr: [00:00.085408] hwdriver: Scan of 'rohde-schwarz-sme-0x' found 0 devices. sr: [00:00.085705] hwdriver: Scan of 'saleae-logic16' found 0 devices. sr: [00:00.085977] scpi_usbtmc: Found 0 device(s). sr: [00:00.086045] hwdriver: Scan of 'scpi-pps' found 0 devices. sr: [00:00.086314] scpi_usbtmc: Found 0 device(s). sr: [00:00.086387] hwdriver: Scan of 'hpib-pps' found 0 devices. sr: [00:00.086392] hwdriver: Scan of 'metrix-mx56c' found 0 devices. sr: [00:00.086395] hwdriver: Scan of 'brymen-bm25x' found 0 devices. sr: [00:00.086398] hwdriver: Scan of 'peaktech-3415' found 0 devices. sr: [00:00.086400] hwdriver: Scan of 'velleman-dvm4100' found 0 devices. sr: [00:00.086403] hwdriver: Scan of 'iso-tech-idm103n' found 0 devices. sr: [00:00.086406] hwdriver: Scan of 'tenma-72-7750-ser' found 0 devices. sr: [00:00.086409] hwdriver: Scan of 'uni-t-ut60g-ser' found 0 devices. sr: [00:00.086411] hwdriver: Scan of 'uni-t-ut61e-ser' found 0 devices. sr: [00:00.086414] hwdriver: Scan of 'digitek-dt4000zc' found 0 devices. sr: [00:00.086416] hwdriver: Scan of 'mastech-ms8250b' found 0 devices. sr: [00:00.086419] hwdriver: Scan of 'pce-pce-dm32' found 0 devices. sr: [00:00.086421] hwdriver: Scan of 'peaktech-3330' found 0 devices. sr: [00:00.086424] hwdriver: Scan of 'tecpel-dmm-8061-ser' found 0 devices. sr: [00:00.086427] hwdriver: Scan of 'tekpower-tp4000ZC' found 0 devices. sr: [00:00.086429] hwdriver: Scan of 'tenma-72-7745-ser' found 0 devices. sr: [00:00.086432] hwdriver: Scan of 'uni-t-ut60a-ser' found 0 devices. sr: [00:00.086434] hwdriver: Scan of 'uni-t-ut60e-ser' found 0 devices. sr: [00:00.086437] hwdriver: Scan of 'va-va18b' found 0 devices. sr: [00:00.086439] hwdriver: Scan of 'va-va40b' found 0 devices. sr: [00:00.086442] hwdriver: Scan of 'voltcraft-vc820-ser' found 0 devices. sr: [00:00.086444] hwdriver: Scan of 'voltcraft-vc840-ser' found 0 devices. sr: [00:00.086447] hwdriver: Scan of 'uni-t-ut61b-ser' found 0 devices. sr: [00:00.086449] hwdriver: Scan of 'uni-t-ut61c-ser' found 0 devices. sr: [00:00.086452] hwdriver: Scan of 'uni-t-ut61d-ser' found 0 devices. sr: [00:00.086455] hwdriver: Scan of 'voltcraft-vc830-ser' found 0 devices. sr: [00:00.086457] hwdriver: Scan of 'bbcgm-2010' found 0 devices. sr: [00:00.086460] hwdriver: Scan of 'mastech-mas345' found 0 devices. sr: [00:00.086462] hwdriver: Scan of 'metex-m3640d' found 0 devices. sr: [00:00.086465] hwdriver: Scan of 'metex-m4650cr' found 0 devices. sr: [00:00.086467] hwdriver: Scan of 'metex-me31' found 0 devices. sr: [00:00.086470] hwdriver: Scan of 'peaktech-3410' found 0 devices. sr: [00:00.086472] hwdriver: Scan of 'peaktech-4370' found 0 devices. sr: [00:00.086475] hwdriver: Scan of 'radioshack-22-168' found 0 devices. sr: [00:00.086477] hwdriver: Scan of 'radioshack-22-805' found 0 devices. sr: [00:00.086480] hwdriver: Scan of 'voltcraft-m3650cr' found 0 devices. sr: [00:00.086482] hwdriver: Scan of 'voltcraft-m3650d' found 0 devices. sr: [00:00.086490] hwdriver: Scan of 'voltcraft-m4650cr' found 0 devices. sr: [00:00.086493] hwdriver: Scan of 'voltcraft-me42' found 0 devices. sr: [00:00.086495] hwdriver: Scan of 'radioshack-22-812' found 0 devices. sr: [00:00.086498] hwdriver: Scan of 'tenma-72-7730-ser' found 0 devices. sr: [00:00.086501] hwdriver: Scan of 'tenma-72-7732-ser' found 0 devices. sr: [00:00.086503] hwdriver: Scan of 'tenma-72-9380a-ser' found 0 devices. sr: [00:00.086506] hwdriver: Scan of 'uni-t-ut71a-ser' found 0 devices. sr: [00:00.086508] hwdriver: Scan of 'uni-t-ut71b-ser' found 0 devices. sr: [00:00.086511] hwdriver: Scan of 'uni-t-ut71c-ser' found 0 devices. sr: [00:00.086513] hwdriver: Scan of 'uni-t-ut71d-ser' found 0 devices. sr: [00:00.086518] hwdriver: Scan of 'uni-t-ut71e-ser' found 0 devices. sr: [00:00.086520] hwdriver: Scan of 'voltcraft-vc920-ser' found 0 devices. sr: [00:00.086523] hwdriver: Scan of 'voltcraft-vc940-ser' found 0 devices. sr: [00:00.086526] hwdriver: Scan of 'voltcraft-vc960-ser' found 0 devices. sr: [00:00.086528] hwdriver: Scan of 'voltcraft-vc870-ser' found 0 devices. sr: [00:00.086532] hwdriver: Scan of 'deree-de5000' found 0 devices. sr: [00:00.086534] hwdriver: Scan of 'peaktech-2170' found 0 devices. sr: [00:00.086654] hwdriver: Scan of 'sysclk-lwla' found 0 devices. sr: [00:00.086658] hwdriver: Scan of 'teleinfo' found 0 devices. sr: [00:00.119251] hwdriver: Scan of 'testo' found 0 devices. sr: [00:00.119282] hwdriver: Scan of 'tondaj-sl-814' found 0 devices. sr: [00:00.119299] hwdriver: Scan of 'tecpel-dmm-8061' found 0 devices. sr: [00:00.119302] hwdriver: Scan of 'uni-t-ut372' found 0 devices. sr: [00:00.119304] hwdriver: Scan of 'uni-t-ut60a' found 0 devices. sr: [00:00.119307] hwdriver: Scan of 'uni-t-ut60e' found 0 devices. sr: [00:00.119309] hwdriver: Scan of 'uni-t-ut60g' found 0 devices. sr: [00:00.119312] hwdriver: Scan of 'uni-t-ut61b' found 0 devices. sr: [00:00.119314] hwdriver: Scan of 'uni-t-ut61c' found 0 devices. sr: [00:00.119317] hwdriver: Scan of 'uni-t-ut61d' found 0 devices. sr: [00:00.119319] hwdriver: Scan of 'uni-t-ut61e' found 0 devices. sr: [00:00.119322] hwdriver: Scan of 'uni-t-ut71a' found 0 devices. sr: [00:00.119324] hwdriver: Scan of 'uni-t-ut71b' found 0 devices. sr: [00:00.119327] hwdriver: Scan of 'uni-t-ut71c' found 0 devices. sr: [00:00.119329] hwdriver: Scan of 'uni-t-ut71d' found 0 devices. sr: [00:00.119331] hwdriver: Scan of 'uni-t-ut71e' found 0 devices. sr: [00:00.119334] hwdriver: Scan of 'voltcraft-vc820' found 0 devices. sr: [00:00.119336] hwdriver: Scan of 'voltcraft-vc830' found 0 devices. sr: [00:00.119339] hwdriver: Scan of 'voltcraft-vc840' found 0 devices. sr: [00:00.119341] hwdriver: Scan of 'voltcraft-vc870' found 0 devices. sr: [00:00.119344] hwdriver: Scan of 'voltcraft-vc920' found 0 devices. sr: [00:00.119347] hwdriver: Scan of 'voltcraft-vc940' found 0 devices. sr: [00:00.119349] hwdriver: Scan of 'voltcraft-vc960' found 0 devices. sr: [00:00.119352] hwdriver: Scan of 'tenma-72-7730' found 0 devices. sr: [00:00.119354] hwdriver: Scan of 'tenma-72-7732' found 0 devices. sr: [00:00.119357] hwdriver: Scan of 'tenma-72-9380a' found 0 devices. sr: [00:00.119359] hwdriver: Scan of 'tenma-72-7745' found 0 devices. sr: [00:00.119362] hwdriver: Scan of 'tenma-72-7750' found 0 devices. sr: [00:00.119364] hwdriver: Scan of 'uni-t-ut32x' found 0 devices. sr: [00:00.119492] hwdriver: Scan of 'victor-dmm' found 0 devices. sr: [00:00.119771] scpi_usbtmc: Found 0 device(s). sr: [00:00.119861] hwdriver: Scan of 'yokogawa-dlm' found 0 devices. sr: [00:00.133299] hwdriver: Scan of 'zeroplus-logic-cube' found 0 devices. The following devices were found: demo - Demo device with 12 channels: D0 D1 D2 D3 D4 D5 D6 D7 A0 A1 A2 A3 fx2lafw - CWAV USBee AX with 9 channels: D0 D1 D2 D3 D4 D5 D6 D7 A0 I did not understand one moment: sr: [00:00.076600] resource: Attempt to open '/home/ark/.local/share/sigrok-firmware/fx2lafw-cwav-usbeeax.fw' failed: No such file or directory Then it opens correctly sr: [00:00.077043] resource: Opened '/usr/local/share/sigrok-firmware/fx2lafw-cwav-usbeeax.fw'. sr: [00:00.077090] ezusb: Uploading firmware 'fx2lafw-cwav-usbeeax.fw'. sr: [00:00.077602] ezusb: Uploaded 4096 bytes. sr: [00:00.078099] ezusb: Uploaded 4024 bytes. sr: [00:00.078109] ezusb: Firmware upload done. sr: [00:00.078114] ezusb: setting CPU reset mode off... sr: [00:00.078253] hwdriver: Scan of 'fx2lafw' found 1 devices.
That looks good so far, the firmware is found and uploaded correctly, the --scan works fine. I would assume that actually using the device should also work. What is the output of "sigrok-cli -d fx2lafw -c samplerate=1mhz --samples 10 -l 5"?
Good day! sigrok-cli -d fx2lafw -c samplerate=1mhz --samples 10 -l 5 sr: [00:00.000000] log: libsigrok loglevel set to 5. sr: [00:00.000036] backend: libsigrok 0.5.0/4:0:0 (rt: 0.5.0/4:0:0). sr: [00:00.000925] backend: Libs: glib 2.50.2 (rt: 2.50.2/5002:2), libzip 1.3.0, libserialport 0.1.1/1:0:1 (rt: 0.1.1/1:0:1), libusb-1.0 , libftdi 1.4, librevisa 0.0.20130412. sr: [00:00.000942] backend: Host: amd64-portbld-freebsd11.0, little-endian. sr: [00:00.000949] backend: SCPI backends: TCP, RPC, serial, VISA, USBTMC. sr: [00:00.001812] backend: Sanity-checking all drivers. sr: [00:00.001839] backend: Sanity-checking all input modules. sr: [00:00.001846] backend: Sanity-checking all output modules. sr: [00:00.001857] backend: Sanity-checking all transform modules. srd: libsigrokdecode loglevel set to 5. sr: [00:00.002523] ezusb: uploading firmware to device on 0.7 sr: [00:00.002595] ezusb: setting CPU reset mode on... sr: [00:00.002969] resource: Attempt to open '/home/ark/.local/share/sigrok-firmware/fx2lafw-cwav-usbeeax.fw' failed: No such file or directory sr: [00:00.003586] resource: Opened '/usr/local/share/sigrok-firmware/fx2lafw-cwav-usbeeax.fw'. sr: [00:00.003825] ezusb: Uploading firmware 'fx2lafw-cwav-usbeeax.fw'. sr: [00:00.004298] ezusb: Uploaded 4096 bytes. sr: [00:00.004799] ezusb: Uploaded 4024 bytes. sr: [00:00.004809] ezusb: Firmware upload done. sr: [00:00.004815] ezusb: setting CPU reset mode off... sr: [00:00.004982] hwdriver: Scan of 'fx2lafw' found 1 devices. sr: [00:00.005034] fx2lafw: Waiting for device to reset. sr: [00:00.406690] fx2lafw: Waited 401ms. sr: [00:00.508729] fx2lafw: Waited 503ms. sr: [00:00.611875] fx2lafw: Waited 606ms. sr: [00:00.719129] fx2lafw: Waited 714ms. sr: [00:00.822837] fx2lafw: Waited 817ms. sr: [00:00.929983] fx2lafw: Waited 925ms. sr: [00:01.033538] fx2lafw: Waited 1028ms. sr: [00:01.140802] fx2lafw: Waited 1135ms. sr: [00:01.248056] fx2lafw: Waited 1243ms. sr: [00:01.355379] fx2lafw: Waited 1350ms. sr: [00:01.459065] fx2lafw: Waited 1454ms. sr: [00:02.101798] fx2lafw: Waited 2096ms. sr: [00:02.209055] fx2lafw: Waited 2204ms. sr: [00:02.316195] fx2lafw: Waited 2311ms. sr: [00:02.417609] fx2lafw: Waited 2412ms. sr: [00:02.518743] fx2lafw: Waited 2513ms. sr: [00:02.625934] fx2lafw: Waited 2620ms. sr: [00:02.729941] fx2lafw: Waited 2724ms. sr: [00:02.831142] fx2lafw: Waited 2826ms. sr: [00:02.934449] fx2lafw: Waited 2929ms. sr: [00:03.041793] fx2lafw: Waited 3036ms. sr: [00:03.041840] fx2lafw: Device failed to renumerate. Failed to open device.
What happens if you run the command again immediately afterwards?
Good day! sigrok-cli -d fx2lafw -c samplerate=1mhz --samples 10 -l 5 sr: [00:00.000000] log: libsigrok loglevel set to 5. sr: [00:00.000020] backend: libsigrok 0.5.0/4:0:0 (rt: 0.5.0/4:0:0). sr: [00:00.000044] backend: Libs: glib 2.50.2 (rt: 2.50.2/5002:2), libzip 1.3.0, libserialport 0.1.1/1:0:1 (rt: 0.1.1/1:0:1), libusb-1.0 , libftdi 1.4, librevisa 0.0.20130412. sr: [00:00.000051] backend: Host: amd64-portbld-freebsd11.0, little-endian. sr: [00:00.000056] backend: SCPI backends: TCP, RPC, serial, VISA, USBTMC. sr: [00:00.000075] backend: Sanity-checking all drivers. sr: [00:00.000082] backend: Sanity-checking all input modules. sr: [00:00.000085] backend: Sanity-checking all output modules. sr: [00:00.000089] backend: Sanity-checking all transform modules. srd: libsigrokdecode loglevel set to 5. sr: [00:00.000540] ezusb: uploading firmware to device on 2.2 sr: [00:00.000602] ezusb: setting CPU reset mode on... sr: [00:00.000952] resource: Attempt to open '/home/ark/.local/share/sigrok-firmware/fx2lafw-cwav-usbeeax.fw' failed: No such file or directory sr: [00:00.000967] resource: Opened '/usr/local/share/sigrok-firmware/fx2lafw-cwav-usbeeax.fw'. sr: [00:00.001018] ezusb: Uploading firmware 'fx2lafw-cwav-usbeeax.fw'. sr: [00:00.002071] ezusb: Uploaded 4096 bytes. sr: [00:00.003087] ezusb: Uploaded 4024 bytes. sr: [00:00.003097] ezusb: Firmware upload done. sr: [00:00.003103] ezusb: setting CPU reset mode off... sr: [00:00.003379] hwdriver: Scan of 'fx2lafw' found 1 devices. sr: [00:00.003435] fx2lafw: Waiting for device to reset. sr: [00:00.411624] fx2lafw: Waited 408ms. sr: [00:00.512612] fx2lafw: Waited 509ms. sr: [00:00.618637] fx2lafw: Waited 615ms. sr: [00:00.721503] fx2lafw: Waited 718ms. sr: [00:00.823473] fx2lafw: Waited 820ms. sr: [00:00.930797] fx2lafw: Waited 927ms. sr: [00:01.037492] fx2lafw: Waited 1034ms. sr: [00:01.144679] fx2lafw: Waited 1141ms. sr: [00:01.251800] fx2lafw: Waited 1248ms. sr: [00:01.359060] fx2lafw: Waited 1355ms. sr: [00:02.119604] fx2lafw: Waited 2116ms. sr: [00:02.226888] fx2lafw: Waited 2223ms. sr: [00:02.328763] fx2lafw: Waited 2325ms. sr: [00:02.435956] fx2lafw: Waited 2432ms. sr: [00:02.543216] fx2lafw: Waited 2539ms. sr: [00:02.650581] fx2lafw: Waited 2647ms. sr: [00:02.756210] fx2lafw: Waited 2752ms. sr: [00:02.863425] fx2lafw: Waited 2860ms. sr: [00:02.970805] fx2lafw: Waited 2967ms. sr: [00:03.078138] fx2lafw: Waited 3074ms. sr: [00:03.078154] fx2lafw: Device failed to renumerate. Failed to open device. ark@ark:~ % sigrok-cli -d fx2lafw -c samplerate=1mhz --samples 10 -l 5 sr: [00:00.000000] log: libsigrok loglevel set to 5. sr: [00:00.000020] backend: libsigrok 0.5.0/4:0:0 (rt: 0.5.0/4:0:0). sr: [00:00.000043] backend: Libs: glib 2.50.2 (rt: 2.50.2/5002:2), libzip 1.3.0, libserialport 0.1.1/1:0:1 (rt: 0.1.1/1:0:1), libusb-1.0 , libftdi 1.4, librevisa 0.0.20130412. sr: [00:00.000051] backend: Host: amd64-portbld-freebsd11.0, little-endian. sr: [00:00.000055] backend: SCPI backends: TCP, RPC, serial, VISA, USBTMC. sr: [00:00.000074] backend: Sanity-checking all drivers. sr: [00:00.000081] backend: Sanity-checking all input modules. sr: [00:00.000085] backend: Sanity-checking all output modules. sr: [00:00.000088] backend: Sanity-checking all transform modules. srd: libsigrokdecode loglevel set to 5. sr: [00:00.005541] fx2lafw: Found an fx2lafw device. sr: [00:00.005591] hwdriver: Scan of 'fx2lafw' found 1 devices. sr: [00:00.005626] fx2lafw: Firmware upload was not needed. sr: [00:00.005803] fx2lafw: Unable to open device. Failed to open device. ark@ark:~ % sigrok-cli -d fx2lafw -c samplerate=1mhz --samples 10 -l 5 sr: [00:00.000001] log: libsigrok loglevel set to 5. sr: [00:00.000032] backend: libsigrok 0.5.0/4:0:0 (rt: 0.5.0/4:0:0). sr: [00:00.000075] backend: Libs: glib 2.50.2 (rt: 2.50.2/5002:2), libzip 1.3.0, libserialport 0.1.1/1:0:1 (rt: 0.1.1/1:0:1), libusb-1.0 , libftdi 1.4, librevisa 0.0.20130412. sr: [00:00.000088] backend: Host: amd64-portbld-freebsd11.0, little-endian. sr: [00:00.000097] backend: SCPI backends: TCP, RPC, serial, VISA, USBTMC. sr: [00:00.000129] backend: Sanity-checking all drivers. sr: [00:00.000140] backend: Sanity-checking all input modules. sr: [00:00.000146] backend: Sanity-checking all output modules. sr: [00:00.000153] backend: Sanity-checking all transform modules. srd: libsigrokdecode loglevel set to 5. sr: [00:00.005871] fx2lafw: Found an fx2lafw device. sr: [00:00.005903] hwdriver: Scan of 'fx2lafw' found 1 devices. sr: [00:00.005957] fx2lafw: Firmware upload was not needed. sr: [00:00.006281] fx2lafw: Unable to open device. Failed to open device.
Good day! I tried to change the USB port of USB2 -> USB3 I see in the dmesg: usb_alloc_device: set address 7 failed (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_IOERROR ugen0.7: <vendor 0x08a9 product 0x0014> at usbus0 uhub_explore: illegal enable change, port 2 ugen0.7: <vendor 0x08a9 product 0x0014> at usbus0 (disconnected) ugen0.7: <sigrok fx2lafw> at usbus0 ugen0.7: <sigrok fx2lafw> at usbus0 (disconnected) ugen0.7: <sigrok fx2lafw> at usbus0 ugen0.7: <sigrok fx2lafw> at usbus0 (disconnected) usb_alloc_device: set address 7 failed (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_IOERROR ugen0.7: <vendor 0x08a9 product 0x0014> at usbus0 uhub_explore: illegal enable change, port 2 ugen0.7: <vendor 0x08a9 product 0x0014> at usbus0 (disconnected) ugen0.7: <vendor 0x08a9 product 0x0014> at usbus0 ugen0.7: <vendor 0x08a9 product 0x0014> at usbus0 (disconnected) usb_alloc_device: set address 7 failed (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_IOERROR ugen0.7: <vendor 0x08a9 product 0x0014> at usbus0 uhub_explore: illegal enable change, port 2 ppt0: detached pci0: <serial bus, USB> at device 20.0 (no driver attached) xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf2520000-0xf252ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus2 on xhci0 usbus2: 5.0Gbps Super Speed USB v3.0 ugen2.1: <0x8086 XHCI root HUB> at usbus2 uhub4: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 uhub4: 8 ports with 8 removable, self powered ugen0.7: <vendor 0x08a9 product 0x0014> at usbus0 (disconnected) ugen2.2: <vendor 0x08a9 product 0x0014> at usbus2 ugen2.2: <vendor 0x08a9 product 0x0014> at usbus2 (disconnected) ugen2.2: <vendor 0x08a9 product 0x0014> at usbus2 ugen2.2: <vendor 0x08a9 product 0x0014> at usbus2 (disconnected) ugen2.2: <sigrok fx2lafw> at usbus2
To me, that looks like either a damaged chip or a bad USB cable. Can you try different ones? The cables that come with the board(s) are usually very low quality.
Good day! With another cable, the situation is completely similar. sigrok-cli -d fx2lafw -c samplerate=1mhz --samples 10 -l 5 sr: [00:00.000000] log: libsigrok loglevel set to 5. sr: [00:00.000020] backend: libsigrok 0.5.0/4:0:0 (rt: 0.5.0/4:0:0). sr: [00:00.000044] backend: Libs: glib 2.50.2 (rt: 2.50.2/5002:2), libzip 1.3.0, libserialport 0.1.1/1:0:1 (rt: 0.1.1/1:0:1), libusb-1.0 , libftdi 1.4, librevisa 0.0.20130412. sr: [00:00.000051] backend: Host: amd64-portbld-freebsd11.0, little-endian. sr: [00:00.000056] backend: SCPI backends: TCP, RPC, serial, VISA, USBTMC. sr: [00:00.000074] backend: Sanity-checking all drivers. sr: [00:00.000081] backend: Sanity-checking all input modules. sr: [00:00.000085] backend: Sanity-checking all output modules. sr: [00:00.000088] backend: Sanity-checking all transform modules. srd: libsigrokdecode loglevel set to 5. sr: [00:00.005267] fx2lafw: Found an fx2lafw device. sr: [00:00.005308] hwdriver: Scan of 'fx2lafw' found 1 devices. sr: [00:00.005351] fx2lafw: Firmware upload was not needed. sr: [00:00.005527] fx2lafw: Unable to open device. Failed to open device. ark@ark:~ % sigrok-cli -d fx2lafw -c samplerate=1mhz --samples 10 -l 5 sr: [00:00.000000] log: libsigrok loglevel set to 5. sr: [00:00.000030] backend: libsigrok 0.5.0/4:0:0 (rt: 0.5.0/4:0:0). sr: [00:00.000065] backend: Libs: glib 2.50.2 (rt: 2.50.2/5002:2), libzip 1.3.0, libserialport 0.1.1/1:0:1 (rt: 0.1.1/1:0:1), libusb-1.0 , libftdi 1.4, librevisa 0.0.20130412. sr: [00:00.000077] backend: Host: amd64-portbld-freebsd11.0, little-endian. sr: [00:00.000084] backend: SCPI backends: TCP, RPC, serial, VISA, USBTMC. sr: [00:00.000110] backend: Sanity-checking all drivers. sr: [00:00.000120] backend: Sanity-checking all input modules. sr: [00:00.000126] backend: Sanity-checking all output modules. sr: [00:00.000130] backend: Sanity-checking all transform modules. srd: libsigrokdecode loglevel set to 5. sr: [00:00.000748] ezusb: uploading firmware to device on 2.2 sr: [00:00.000819] ezusb: setting CPU reset mode on... sr: [00:00.001122] resource: Attempt to open '/home/ark/.local/share/sigrok-firmware/fx2lafw-cwav-usbeeax.fw' failed: No such file or directory sr: [00:00.001147] resource: Opened '/usr/local/share/sigrok-firmware/fx2lafw-cwav-usbeeax.fw'. sr: [00:00.001225] ezusb: Uploading firmware 'fx2lafw-cwav-usbeeax.fw'. sr: [00:00.002296] ezusb: Uploaded 4096 bytes. sr: [00:00.003311] ezusb: Uploaded 4024 bytes. sr: [00:00.003324] ezusb: Firmware upload done. sr: [00:00.003328] ezusb: setting CPU reset mode off... sr: [00:00.003613] hwdriver: Scan of 'fx2lafw' found 1 devices. sr: [00:00.003681] fx2lafw: Waiting for device to reset. sr: [00:00.406527] fx2lafw: Waited 402ms. sr: [00:00.507520] fx2lafw: Waited 503ms. sr: [00:00.609519] fx2lafw: Waited 605ms. sr: [00:00.714525] fx2lafw: Waited 710ms. sr: [00:00.816162] fx2lafw: Waited 812ms. sr: [00:00.918522] fx2lafw: Waited 914ms. sr: [00:01.020150] fx2lafw: Waited 1016ms. sr: [00:01.121528] fx2lafw: Waited 1117ms. sr: [00:01.226973] fx2lafw: Waited 1223ms. sr: [00:01.328530] fx2lafw: Waited 1324ms. sr: [00:01.429522] fx2lafw: Waited 1425ms. sr: [00:02.110529] fx2lafw: Waited 2106ms. sr: [00:02.211521] fx2lafw: Waited 2207ms. sr: [00:02.313528] fx2lafw: Waited 2309ms. sr: [00:02.415530] fx2lafw: Waited 2411ms. sr: [00:02.517530] fx2lafw: Waited 2513ms. sr: [00:02.624301] fx2lafw: Waited 2620ms. sr: [00:02.726529] fx2lafw: Waited 2722ms. sr: [00:02.827523] fx2lafw: Waited 2823ms. sr: [00:02.930528] fx2lafw: Waited 2926ms. sr: [00:03.036340] fx2lafw: Waited 3032ms. sr: [00:03.036364] fx2lafw: Device failed to renumerate. Failed to open device. This cable works fine with my self-made board on the same chipset(USB to LPT)
Good day! I'll try to install the old version and check with it.
Good day! Under WindowsXP in emulation mode(VirtualBox): The device is detected normally. Unfortunately, in emulation mode, I can pass only USB1 device.
Good day! As I wrote above, everything works with the old version sigrok-cli -d fx2lafw -c samplerate=1mhz --samples 10 -l 5 sr: libsigrok loglevel set to 5. sr: backend: Sanity-checking all drivers. sr: backend: Sanity-checking all input modules. sr: backend: Sanity-checking all output modules. srd: libsigrokdecode loglevel set to 5. sr: hwdriver: Initializing driver 'fx2lafw'. sr: fx2lafw: Found an fx2lafw device. sr: hwdriver: Scan of 'fx2lafw' found 1 devices. sr: fx2lafw: Firmware upload was not needed. sr: fx2lafw: Opened device 0 on 0.7, interface 0, firmware 1.2. sr: fx2lafw: Detected REVID=1, it's a Cypress CY7C68013A (FX2LP). sr: session: Starting. sr: std: fx2lafw: Starting acquisition. sr: std: fx2lafw: Sending SR_DF_HEADER packet. sr: session: bus: Received SR_DF_HEADER packet. cli: Received SR_DF_HEADER. sr: fx2lafw: GPIF delay = 47, clocksource = 48MHz. sr: session: Running. sr: fx2lafw: receive_transfer(): status 0 received 10240 bytes. sr: session: bus: Received SR_DF_LOGIC packet (10 bytes, unitsize = 1). cli: Received SR_DF_LOGIC (10 bytes, unitsize = 1). libsigrok 0.3.0 Acquisition with 8/8 channels at 1 MHz sr: session: bus: Received SR_DF_END packet. 0:00000000 00 1:00000000 00 2:00000000 00 3:11111111 11 4:11111111 11 5:00000000 00 6:00000000 00 7:11111111 11 cli: Received SR_DF_END. sr: fx2lafw: fx2lafw: Closing device 0 on 0.7 interface 0.sigrok-cli -d fx2lafw -c samplerate=1mhz --samples 10 -l 5 sr: libsigrok loglevel set to 5. sr: backend: Sanity-checking all drivers. sr: backend: Sanity-checking all input modules. sr: backend: Sanity-checking all output modules. srd: libsigrokdecode loglevel set to 5. sr: hwdriver: Initializing driver 'fx2lafw'. sr: fx2lafw: Found an fx2lafw device. sr: hwdriver: Scan of 'fx2lafw' found 1 devices. sr: fx2lafw: Firmware upload was not needed. sr: fx2lafw: Opened device 0 on 0.7, interface 0, firmware 1.2. sr: fx2lafw: Detected REVID=1, it's a Cypress CY7C68013A (FX2LP). sr: session: Starting. sr: std: fx2lafw: Starting acquisition. sr: std: fx2lafw: Sending SR_DF_HEADER packet. sr: session: bus: Received SR_DF_HEADER packet. cli: Received SR_DF_HEADER. sr: fx2lafw: GPIF delay = 47, clocksource = 48MHz. sr: session: Running. sr: fx2lafw: receive_transfer(): status 0 received 10240 bytes. sr: session: bus: Received SR_DF_LOGIC packet (10 bytes, unitsize = 1). cli: Received SR_DF_LOGIC (10 bytes, unitsize = 1). libsigrok 0.3.0 Acquisition with 8/8 channels at 1 MHz sr: session: bus: Received SR_DF_END packet. 0:00000000 00 1:00000000 00 2:00000000 00 3:11111111 11 4:11111111 11 5:00000000 00 6:00000000 00 7:11111111 11 cli: Received SR_DF_END. sr: fx2lafw: fx2lafw: Closing device 0 on 0.7 interface 0.
Good day! Old version pulseview also work
Good day! There is news to solve this problem?
Unfortunately, this is very difficult to debug. The reason for this is that it's unclear whether it's a driver (libsigrok) or firmware (fx2lafw) issue. Without access to the hardware, it's very tricky. With that, I can't make any promises.
Good day! I understood. Do you have a memory dump of I2C EEPROM from a working USBee AX-Pro clone?
Please retry current git HEAD of libsigrok, we recently fixed bug #1109 which might be a duplicate of this one. (btw., I2C dump would not help much unfortunately)
Good day! I think it work. ark@ark:/usr/ports % sigrok-cli -d fx2lafw -c samplerate=1mhz --samples 10 -l 5 sr: [00:00.000004] log: libsigrok loglevel set to 5. sr: [00:00.000155] backend: libsigrok 0.6.0-git-d8df3c2a/4:0:0 (rt: 0.6.0-git-d8df3c2a/4:0:0). sr: [00:00.000205] backend: Libs: glib 2.50.3 (rt: 2.50.3/5003:3), libzip 1.3.2, libserialport 0.1.1/1:0:1 (rt: 0.1.1/1:0:1), libusb-1.0 , libftdi 1.4, librevisa 0.0.20130412. sr: [00:00.000214] backend: Host: amd64-unknown-freebsd11.1, little-endian. sr: [00:00.000219] backend: SCPI backends: TCP, RPC, serial, VISA, USBTMC. sr: [00:00.000345] backend: Sanity-checking all drivers. sr: [00:00.000359] backend: Sanity-checking all input modules. sr: [00:00.000368] backend: Sanity-checking all output modules. sr: [00:00.000377] backend: Sanity-checking all transform modules. srd: libsigrokdecode loglevel set to 5. sr: [00:00.001235] ezusb: uploading firmware to device on 1.7 sr: [00:00.001307] ezusb: setting CPU reset mode on... sr: [00:00.001567] resource: SIGROK_FIRMWARE_DIR environment variable not set, ignoring. sr: [00:00.001693] resource: Attempt to open '/home/ark/.local/share/sigrok-firmware/fx2lafw-cwav-usbeeax.fw' failed: No such file or directory sr: [00:00.001708] resource: Opened '/usr/local/share/sigrok-firmware/fx2lafw-cwav-usbeeax.fw'. sr: [00:00.001763] ezusb: Uploading firmware 'fx2lafw-cwav-usbeeax.fw'. sr: [00:00.002559] ezusb: Uploaded 4096 bytes. sr: [00:00.003178] ezusb: Uploaded 4024 bytes. sr: [00:00.003189] ezusb: Firmware upload done. sr: [00:00.003195] ezusb: setting CPU reset mode off... sr: [00:00.003352] hwdriver: Scan found 1 devices (fx2lafw). sr: [00:00.003400] device: fx2lafw: Opening device instance. sr: [00:00.003404] fx2lafw: Waiting for device to reset. sr: [00:00.420871] fx2lafw: Waited 417ms. sr: [00:00.528309] fx2lafw: Waited 524ms. sr: [00:00.629702] fx2lafw: Waited 626ms. sr: [00:00.736304] fx2lafw: Waited 732ms. sr: [00:00.843569] fx2lafw: Waited 840ms. sr: [00:00.950825] fx2lafw: Waited 947ms. sr: [00:01.058314] fx2lafw: Waited 1054ms. sr: [00:01.165572] fx2lafw: Waited 1162ms. sr: [00:01.267066] fx2lafw: Waited 1263ms. sr: [00:01.374307] fx2lafw: Waited 1370ms. sr: [00:01.978116] fx2lafw: Opened device on 1.7 (logical) / usb/1-1.2 (physical), interface 0, firmware 1.3. sr: [00:01.978132] fx2lafw: Detected REVID=1, it's a Cypress CY7C68013A (FX2LP). sr: [00:01.978139] fx2lafw: Device came back after 1370ms. sr: [00:01.978453] hwdriver: sr_config_set(): key 30000 (samplerate) sdi 0x80401e840 cg NULL -> uint64 1000000 sr: [00:01.978487] hwdriver: sr_config_set(): key 50001 (limit_samples) sdi 0x80401e840 cg NULL -> uint64 10 sr: [00:01.978563] session: Using thread-default main context. sr: [00:01.978573] session: Starting. sr: [00:01.978578] hwdriver: fx2lafw: Starting acquisition. sr: [00:01.978632] fx2lafw: submitting transfer: 0 sr: [00:01.978701] fx2lafw: submitting transfer: 1 sr: [00:01.978734] fx2lafw: submitting transfer: 2 sr: [00:01.978740] fx2lafw: submitting transfer: 3 sr: [00:01.978745] fx2lafw: submitting transfer: 4 sr: [00:01.978750] fx2lafw: submitting transfer: 5 sr: [00:01.978754] fx2lafw: submitting transfer: 6 sr: [00:01.978759] fx2lafw: submitting transfer: 7 sr: [00:01.978764] fx2lafw: submitting transfer: 8 sr: [00:01.978768] fx2lafw: submitting transfer: 9 sr: [00:01.978774] fx2lafw: submitting transfer: 10 sr: [00:01.978779] fx2lafw: submitting transfer: 11 sr: [00:01.978783] fx2lafw: submitting transfer: 12 sr: [00:01.978788] fx2lafw: submitting transfer: 13 sr: [00:01.978793] fx2lafw: submitting transfer: 14 sr: [00:01.978797] fx2lafw: submitting transfer: 15 sr: [00:01.978801] fx2lafw: submitting transfer: 16 sr: [00:01.978805] fx2lafw: submitting transfer: 17 sr: [00:01.978810] fx2lafw: submitting transfer: 18 sr: [00:01.978814] fx2lafw: submitting transfer: 19 sr: [00:01.978823] fx2lafw: submitting transfer: 20 sr: [00:01.978827] fx2lafw: submitting transfer: 21 sr: [00:01.978832] fx2lafw: submitting transfer: 22 sr: [00:01.978837] fx2lafw: submitting transfer: 23 sr: [00:01.978841] fx2lafw: submitting transfer: 24 sr: [00:01.978845] fx2lafw: submitting transfer: 25 sr: [00:01.978850] fx2lafw: submitting transfer: 26 sr: [00:01.978855] fx2lafw: submitting transfer: 27 sr: [00:01.978859] fx2lafw: submitting transfer: 28 sr: [00:01.978864] fx2lafw: submitting transfer: 29 sr: [00:01.978872] fx2lafw: submitting transfer: 30 sr: [00:01.978876] fx2lafw: submitting transfer: 31 sr: [00:01.978881] std: fx2lafw: Sending SR_DF_HEADER packet. sr: [00:01.978889] session: Running transform module 'nop'. sr: [00:01.978894] transform/nop: Received packet of type 10000, passing on unmodified. sr: [00:01.978900] session: bus: Received SR_DF_HEADER packet. cli: Received SR_DF_HEADER. sr: [00:01.979000] hwdriver: sr_config_get(): key 30000 (samplerate) sdi 0x80401e840 cg NULL -> uint64 1000000 sr: [00:01.979011] fx2lafw: GPIF delay = 47, clocksource = 48MHz. sr: [00:01.984806] fx2lafw: receive_transfer(): status LIBUSB_SUCCESS received 10240 bytes. sr: [00:01.984845] session: Running transform module 'nop'. sr: [00:01.984850] transform/nop: Received packet of type 10004, passing on unmodified. sr: [00:01.984853] session: bus: Received SR_DF_LOGIC packet (10 bytes, unitsize = 1). cli: Received SR_DF_LOGIC (10 bytes, unitsize = 1). sr: [00:01.984883] hwdriver: sr_config_get(): key 30000 (samplerate) sdi 0x80401e840 cg NULL -> uint64 1000000 libsigrok 0.6.0-git-d8df3c2a Acquisition with 8/9 channels at 1 MHz sr: [00:01.984918] session: Running transform module 'nop'. sr: [00:01.984921] transform/nop: Received packet of type 10007, passing on unmodified. sr: [00:01.984924] session: bus: Received SR_DF_ANALOG packet (10 samples). cli: Received SR_DF_ANALOG (10 samples). A0: 8.91 V A0: 8.83 V A0: -0.62 V A0: 0.00 V A0: 0.00 V A0: 0.00 V A0: 0.00 V A0: 0.00 V A0: 0.00 V A0: 0.00 V sr: [00:01.984996] std: fx2lafw: Sending SR_DF_END packet. sr: [00:01.985000] session: Running transform module 'nop'. sr: [00:01.985002] transform/nop: Received packet of type 10001, passing on unmodified. sr: [00:01.985005] session: bus: Received SR_DF_END packet. D0:00000000 00 D1:00000000 00 D2:00000000 00 D3:11111111 11 D4:11111111 11 D5:00000000 00 D6:00000000 00 D7:11111111 11 cli: Received SR_DF_END. sr: [00:01.985029] usb: usb_source_finalize sr: [00:01.985048] session: Stopped. sr: [00:01.985075] hwdriver: Cleaning up all drivers. sr: [00:01.985080] fx2lafw: Closing device on 1.7 (logical) / usb/1-1.2 (physical) interface 0. Thanks a lot!
Great, thanks for testing. Marking as duplicate of #1109. *** This bug has been marked as a duplicate of bug 1109 ***
Good day! About I2C dump: I have, usbee.iic C0 A9 08 14 00 00 1B 00 00 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF saleae.iic C0 25 09 81 38 01 00 00 00 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
*** This bug has been marked as a duplicate of bug 1109 ***