Velleman PCSU1000
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
The Velleman PCSU1000 is an inexpensive USB-based oscilloscope. It has 2 channels, an analog bandwidth of 50MHz and 1GS/s sampling rate.
See Velleman PCSU1000/Info for more details (such as lsusb -vvv output) about the device.
Hardware
Control logic
- Xilinx XC3S50 50K-gate FPGA
- 50MHz crystal: 50.000 Y0KE (clock source for the Xilinx FPGA)
- Microchip PIC16F630-I/P 8-bit microcontroller
USB interface
- FTDI FT245BL USB interface chip
- 6MHz crystal
- Microchip 93LC46BI 128-byte EEPROM chip for the FTDI chip's USB settings
Analog frontend
- 2 x Unisonic ULN2003 7-channel darlington sink driver (each driving a set of 7 relays)
- 14 x SIR-S4-105A FZ Goodsky 5V relay (7 per input channel)
- 2 x Texas Instruments OPA354 op-amps
- 2 x National Semiconductor LMH6724 op-amps
- 2 x Texas Instruments ADC08L060 8-bit 60MSPS A/D converters
Channel triggers
- NXP 74LVC07AD Hex non-inverting buffers
- Texas Instruments TLC5620 8-bit quad DAC
- Texas Instruments TLC372 dual differential comparator
Power
- 3 x Texas Instruments TPS766xx voltage regulators (IC19=1V, IC20=2.5V, IC21=3.3V)
?
- Philips/NXP 74HC367D Hex buffer/line driver
Photos
Protocol
TODO.
Resources
- The vendor software appears to have been written by Magnova Components.
- Schematics, PCB, Parts list.