Difference between revisions of "VKTECH saleae clone"

From sigrok
Jump to navigation Jump to search
Line 1: Line 1:
{{Infobox logic analyzer
{{Infobox logic analyzer
| image            = [[File:VKTECH_connected.jpg|180px]]
| image            = [[File:VKTECH_thumb.jpg|180px]]
| name            = VKTECH
| name            = VKTECH
| status          = supported
| status          = supported
Line 39: Line 39:
File:VKTECH PCB_front.jpg|<small>Device, PCB front</small>
File:VKTECH PCB_front.jpg|<small>Device, PCB front</small>
File:VKTECH PCB_rear.jpg|<small>Device, PCB rear</small>
File:VKTECH PCB_rear.jpg|<small>Device, PCB rear</small>
File:VKTECH_connected.jpg|<small>Device, Connected</small>
</gallery>
</gallery>



Revision as of 16:58, 30 January 2018

VKTECH
VKTECH thumb.jpg
Status supported
Source code fx2lafw
Channels 8
Samplerate 24MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage max. 5.25V
Threshold voltage Fixed: VIH=1.4V, VIL=0.8V
Memory none
Compression none
Website [1]

The VKTEK is a fairly standard Cypress FX2 based 8 channel 24 MHz logic analyzer, it is most similar to the ARMFLY_Mini-Logic and MCU123_USBee_AX_Pro_clone devices, though has differences from both of them (SMD LEDs, QFN package unlike MCU123, transceiver IC unlike ARMFLY).

Mine was purchased from AliExpress and arrived in 6 days.

The VKTECH clone is a USB-based, 8-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.

sigrok uses the open-source fx2lafw firmware for this logic analyzer.

The device uses USB\VID_0925&PID_3881 so is indistinguishable from a Saleae_Logic device

Hardware

  • Main chip: Cypress CY7C68013A-56LTXC (FX2LP in QFN package)
  • Transceiver NXP LVC245A
  • 3.3V voltage regulator: 6206A 1711/33
  • I²C EEPROM: ATMHK218 24C02N
  • Crystal: 24MHz

Photos