Difference between revisions of "Robomotic BugLogic 3"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) m |
m |
||
| Line 12: | Line 12: | ||
| memory = none | | memory = none | ||
| compression = none | | compression = none | ||
| price = $5 - $10 | |||
| website = [http://norduino.robomotic.com/products-page/categories/buglogic3/ robomotic.com] | | website = [http://norduino.robomotic.com/products-page/categories/buglogic3/ robomotic.com] | ||
}} | }} | ||
Latest revision as of 15:22, 30 June 2019
 | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | -0.5V — 5.25V |
| Threshold voltage | Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V |
| Memory | none |
| Compression | none |
| Price range | $5 - $10 |
| Website | robomotic.com |
The Robomotic BugLogic 3 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
It is a clone of the Saleae Logic.
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
See Robomotic BugLogic 3/Info for more details (such as lsusb -vvv output) about the device.
Hardware
- Main chip: Cypress CY7C68013A-56LFXC (FX2LP)
- I2C EEPROM: ?
- Octal tristate bus transceiver: LVC245 (TODO: vendor?)
- Crystal: 24MHz
Photos
Device, front
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.