GW Instek GDS-800 series
Revision as of 18:14, 1 October 2015 by Uwe Hermann (talk | contribs) (Created page with "{{Infobox oscilloscope | image = 180px | name = GW Instek GDS-800 series | status = supporte...")
 | |
| Status | supported |
|---|---|
| Source code | gwinstek-gds-800 |
| Channels | 2 |
| Samplerate | 100MSa/s |
| Samplerate (eq. time) | 25GSa/s |
| Analog bandwidth | 60-250MHz (depends on model) |
| Vertical resolution | 8bits |
| Triggers | edge, pulse width, tv, time delay, event delay |
| Input impedance | 1MΩ‖18pF (depends on model) 300V (DC+AC peak) CATII |
| Memory | 125kpts/channel |
| Display | 5.7" QVGA (320x240), mono or STN (depends on model) |
| Connectivity | RS232, GPIB (optional), "USB, Printer Port, Go/NoGo Output" (optional) |
| Features | math: + / — / FFT, vertical sensitivity: 2mV/div - 5V/div |
| Website | instek.cn |
The GW Instek GDS-800 series are 60-250MHz, 25GSa/s, 2-channel digital storage oscilloscopes with RS232 connectivity (and/or optionally GPIB/USB).
There are rebadged versions of the devices sold under the Voltcraft brand name.
Devices
| Model | Samplerate | Eq. samplerate | Bandwidth | Analog channels | Digital channels |
|---|---|---|---|---|---|
| GW Instek GDS-806S/C | 100MSa/s | 25GSa/s | 60MHz | 2 | None |
| GW Instek GDS-810S/C | 100MSa/s | 25GSa/s | 100MHz | 2 | None |
| GW Instek GDS-820S/C | 100MSa/s | 25GSa/s | 150MHz | 2 | None |
| GW Instek GDS-840S/C | 100MSa/s | 25GSa/s | 250MHz | 2 | None |
| Voltcraft DSO-6060C | 100MSa/s | 25GSa/s | 60MHz | 2 | None |
Protocol
The device's protocol is publically documented in the GDS-800 series programming manual.