128axc-based USBee AX-Pro clone
Revision as of 00:18, 24 November 2018 by Orzel (talk | contribs) (Orzel moved page 128axc-based Saleae Logic clone to 128axc-based USBee AX-Pro clone)
| File:128axc-saleae-logic-clone-Overview.jpg | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | -0.5V — 5.25V (absolute max rating) |
| Threshold voltage | Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V |
| Memory | none |
| Compression | none |
| Website | none |
The 128axc-based Saleae Logic clone is a USB-based logic analyzer with 8-channel and up to 24MHz sample-rate.
It is yet another clone of the Saleae Logic.
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
See 128axc-based Saleae Logic clone/Info for more details (such as lsusb -v output) about the device.
Hardware
- Main chip: Cypress CY7C68013A-128AXC (FX2)
- Input buffer: NXP HC245
- 2kByte I²C EEPROM: Atmel A24C02BN (actually TWI interface)
- Voltage regulator: AMS 117
- 24MHz crystal: RJH24.000
Photos
- 128axc-saleae-logic-clone-Front.jpg
PCB, top
- 128axc-saleae-logic-clone-Back-cypress.jpg
PCB, bottom, CY7C68013A-128AXC
- 128axc-saleae-logic-clone-Nxp-input-buffer.jpg
NXP HC245 Input Buffer
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.