Difference between revisions of "RockyLogic Ant8"

From sigrok
Jump to navigation Jump to search
(Device info.)
(Photos.)
Line 13: Line 13:
* National/TI LP2989 (marking: 33AB 2989 IM-2.5) (micropower/low-noise, 500mA ultra low-dropout regulator)
* National/TI LP2989 (marking: 33AB 2989 IM-2.5) (micropower/low-noise, 500mA ultra low-dropout regulator)
* 20MHz crystal (for the FPGA)
* 20MHz crystal (for the FPGA)
== Photos ==
<gallery row="5">
File:Rockylogic ant8 device.jpg|<small>RockyLogic Ant8</small>
File:Rockylogic ant8 device with probes.jpg|<small>Device with probes</small>
File:Rockylogic ant8 pcb front.jpg|<small>PCB, front</small>
File:Rockylogic ant8 pcb back.jpg|<small>PCB, back</small>
File:Rockylogic ant8 ftdi ft245bm.jpg|<small>FTDI FT245BM</small>
File:Rockylogic ant8 atmel 93c66 eeprom.jpg|<small>Atmel 93C66 EEPROM</small>
File:Rockylogic ant8 xilinx spartan xc2s30 fpga.jpg|<small>Xilinx XC2S30</small>
File:Rockylogic ant8 xilinx xc9572xl cpld.jpg|<small>Xilinx XC9572XL</small>
File:Rockylogic ant8 idt ics501m.jpg|<small>IDT ICS501M</small>
File:Rockylogic ant8 national lp2989 im2 5.jpg|<small>National LP2989</small>
File:Rockylogic ant8 on hc00a pgzi.jpg|<small>ON HC00A</small>
</gallery>


== Status ==
== Status ==


Support for this device is currently being worked on.
Support for this device is currently being worked on.

Revision as of 23:42, 16 December 2011

The RockyLogic Ant8 is an 8-channel, 500MHz logic analyzer.

See RockyLogic_Ant8/Info for more details (such as lsusb -vvv output) about the device.

Components

  • Xilinx Spartan-II XC2S30 VQ100AMS0341 (FPGA; 13,824 total distributed RAM bits, 24K total block RAM)
  • Xilinx XC9572XL VQ44BMN0345 10C (CPLD; 10ns pin-to-pin logic delays)
  • FTDI FT245BM (USB FIFO device)
  • IDT ICS501M (clock multiplier)
  • Atmel AT93C66 (4kB, three-wire serial EEPROM)
  • ON Semiconductor (On) HC00A PGZI (quad 2-input NAND gate)
  • National/TI LP2989 (marking: 33AB 2989 IM-2.5) (micropower/low-noise, 500mA ultra low-dropout regulator)
  • 20MHz crystal (for the FPGA)

Photos

Status

Support for this device is currently being worked on.