Difference between revisions of "Rohde&Schwarz HMP 4000 series"
Jump to navigation
Jump to search
(start an HMP4000 series page) |
(HMP4000 is supported) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
| image = [[File:rs_hmp4040_mugshot.png|180px]] | | image = [[File:rs_hmp4040_mugshot.png|180px]] | ||
| name = Rohde&Schwarz HMP 4000 | | name = Rohde&Schwarz HMP 4000 | ||
| status = | | status = supported | ||
| source_code_dir = scpi-pps | | source_code_dir = scpi-pps | ||
| channels = 3 / 4 | | channels = 3 / 4 | ||
| Line 14: | Line 14: | ||
}} | }} | ||
The '''Rohde&Schwarz HMP 4000''' series consists of the '''HMP 4030''' (3 channels) and '''HMP 4040''' (4 channels) models. Each channel provides up to 32V and up to 10A, with a maximum of 160W per channel, and a maximum of 384W for the total supply. The isolated channels can get connected in series or parallel to get higher voltages or currents. The device ships with USB (CDC and TMC) and LAN by default, GPIB is available as an option. | The '''Rohde&Schwarz HMP 4000''' series consists of the '''HMP 4030''' (3 channels) and '''HMP 4040''' (4 channels) models. Each channel provides up to 32V and up to 10A, with a maximum of 160W per channel, and a maximum of 384W for the total supply. The isolated channels can get connected in series or parallel to get higher voltages or currents (up to 128V or 40A). | ||
The device ships with USB (CDC and TMC) and LAN by default, see the [[Hameg HO732 | HO732]] interface. GPIB is available as an option. | |||
The '''HMP 2000''' series provides models with fewer channels and lower capabilities. | The '''HMP 2000''' series provides models with fewer channels and lower capabilities. | ||
== Photos == | == Photos == | ||
<gallery> | <gallery> | ||
| Line 28: | Line 26: | ||
File:rs_hmp4040_back.png|<small>Device, back</small> | File:rs_hmp4040_back.png|<small>Device, back</small> | ||
</gallery> | </gallery> | ||
== Use == | |||
$ '''sigrok-cli -d scpi-pps --scan''' | |||
The following devices were found: | |||
scpi-pps - ROHDE&SCHWARZ HMP4040 HW50020003/SW2.62 [S/N: 104xxx] with 8 channels: V1 I1 V2 I2 V3 I3 V4 I4 | |||
$ '''sigrok-cli -d scpi-pps --show''' | |||
Driver functions: | |||
Power supply | |||
Scan options: | |||
conn | |||
serialcomm | |||
scpi-pps - ROHDE&SCHWARZ HMP4040 HW50020003/SW2.62 [S/N: 104xxx] with 8 channels: V1 I1 V2 I2 V3 I3 V4 I4 | |||
Channel groups: | |||
1: channels V1 I1 | |||
2: channels V2 I2 | |||
3: channels V3 I3 | |||
4: channels V4 I4 | |||
Supported configuration options across all channel groups: | |||
continuous: on, off | |||
limit_samples: 0 (current) | |||
limit_time: 0 (current) | |||
== Resources == | == Resources == | ||
* [https://www.rohde-schwarz.com/product/hmp4000 vendor's product page] (redirects to some localized version) | * [https://www.rohde-schwarz.com/product/hmp4000 vendor's product page] (redirects to some localized version) | ||
* EEVBlog [https://www.eevblog.com/forum/blog/eevblog-1173-rohde-schwarz-power-supply-bonanza/ episode 1173 forum thread], [https://www.youtube.com/watch?v=Z6F7Pwi6WLI episode 1174 teardown video] | |||
[[Category:Device]] | [[Category:Device]] | ||
[[Category:Power supply]] | [[Category:Power supply]] | ||
[[Category: | [[Category:Supported]] | ||
Latest revision as of 20:15, 25 August 2020
 | |
| Status | supported |
|---|---|
| Source code | scpi-pps |
| Channels | 3 / 4 |
| Voltage/current (CH1) | 0-32V / 0-10A |
| Voltage/current (CH2) | 0-32V / 0-10A |
| Voltage/current (CH3) | 0-32V / 0-10A |
| Voltage/current (CH4) | 0-32V / 0-10A |
| Connectivity | USB CDC, USB TMC, LAN |
| Website | rohde-schwarz.com |
The Rohde&Schwarz HMP 4000 series consists of the HMP 4030 (3 channels) and HMP 4040 (4 channels) models. Each channel provides up to 32V and up to 10A, with a maximum of 160W per channel, and a maximum of 384W for the total supply. The isolated channels can get connected in series or parallel to get higher voltages or currents (up to 128V or 40A).
The device ships with USB (CDC and TMC) and LAN by default, see the HO732 interface. GPIB is available as an option.
The HMP 2000 series provides models with fewer channels and lower capabilities.
Photos
Device, front
Device, back
Use
$ sigrok-cli -d scpi-pps --scan The following devices were found: scpi-pps - ROHDE&SCHWARZ HMP4040 HW50020003/SW2.62 [S/N: 104xxx] with 8 channels: V1 I1 V2 I2 V3 I3 V4 I4
$ sigrok-cli -d scpi-pps --show
Driver functions:
Power supply
Scan options:
conn
serialcomm
scpi-pps - ROHDE&SCHWARZ HMP4040 HW50020003/SW2.62 [S/N: 104xxx] with 8 channels: V1 I1 V2 I2 V3 I3 V4 I4
Channel groups:
1: channels V1 I1
2: channels V2 I2
3: channels V3 I3
4: channels V4 I4
Supported configuration options across all channel groups:
continuous: on, off
limit_samples: 0 (current)
limit_time: 0 (current)
Resources
- vendor's product page (redirects to some localized version)
- EEVBlog episode 1173 forum thread, episode 1174 teardown video