2019-11-14 |
Uwe Hermann | NEWS: Add list of user-visible changes so far.
|
commit | commitdiff | tree |
2019-10-01 |
Kate J. Temkin | allow captures of up to 48MHz, if bus conditions permit
|
commit | commitdiff | tree |
2019-06-01 |
Philip Gottschling | bugfix in hantek 6022BL voltage range selection
|
commit | commitdiff | tree |
2018-12-28 |
Uwe Hermann | Makefile.am: Split an overly long line.
|
commit | commitdiff | tree |
2018-12-28 |
majekw | Add YiXingDianZi MDSO firmware support.
|
commit | commitdiff | tree |
2018-11-17 |
Uwe Hermann | Bump required sdcc version to >= 3.4.0.
|
commit | commitdiff | tree |
2018-06-18 |
Sergey Alirzaev | sainsmart-dds120: make the "1kHz" reference signal...
|
commit | commitdiff | tree |
2018-01-26 |
Uwe Hermann | configure.ac: Bump package version to 0.1.6.
|
commit | commitdiff | tree |
2018-01-26 |
Uwe Hermann | Increase FX2LAFW_VERSION_MINOR to 3.
|
commit | commitdiff | tree |
2018-01-26 |
Uwe Hermann | NEWS: Add list of user-visible changes so far.
|
commit | commitdiff | tree |
2018-01-24 |
Maciej Kurc | fx2lafw: Factor out LED control.
|
commit | commitdiff | tree |
2018-01-24 |
Gerhard Sittig | fx2lafw: silence integer overflow compile warnings
|
commit | commitdiff | tree |
2018-01-24 |
Gerhard Sittig | fx2lafw: fixup missing semicolon after macro "function...
|
commit | commitdiff | tree |
2018-01-17 |
Stefan Brüns | fx2lafw: Insert SYNCDELAYs where necessary according...
|
commit | commitdiff | tree |
2018-01-17 |
Stefan Brüns | fx2lafw: Delay start of GPIF until first BULK IN request...
|
commit | commitdiff | tree |
2018-01-17 |
Stefan Brüns | fx2lafw: add definitions for IBN (IN BULK NAK) interrupt
|
commit | commitdiff | tree |
2018-01-17 |
Stefan Brüns | fx2lafw: remove break after return
|
commit | commitdiff | tree |
2018-01-17 |
Stefan Brüns | fx2lafw: Disable SOF interrupt, it is not used
|
commit | commitdiff | tree |
2017-12-21 |
Gerhard Sittig | scopes: improve C preprocessor macro robustness
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Move a code comment.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | Makefile.am: Fix a 'make distclean' error.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Makefile.am: Add and use SDCC_LINK_FLAGS_SCOPE.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Rename dscr_hantek_6022be.inc to dscr_scope...
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Unify code-base, remove duplicate code/files.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Add include/scope.inc.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Factor out TIMER2_VAL.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Factor out SET_COUPLING() and SET_CALIBRATION_PULSE().
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Factor out CTL_BIT, OUT0, and OE_CTL.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Use RENUMERATE_UNCOND() for all devices.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Initialize PORTA/C/E consistently for all devices.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Factor out LED_CLEAR(), LED_GREEN(), LED_RED().
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Factor out TOGGLE_CALIBRATION_PIN().
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Factor out SET_ANALOG_MODE().
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | scopes: Adapt/fix some code comments, cosmetics.
|
commit | commitdiff | tree |
2017-12-17 |
Uwe Hermann | fx2lafw: Blink LED on pin PA1 during acquisition.
|
commit | commitdiff | tree |
2017-06-12 |
Uwe Hermann | configure.ac: Bump package version to 0.1.5.
|
commit | commitdiff | tree |
2017-06-12 |
Uwe Hermann | NEWS: Add list of user-visible changes so far.
|
commit | commitdiff | tree |
2017-06-06 |
Uwe Hermann | HACKING: Update URL to Linux kernel coding style.
|
commit | commitdiff | tree |
2017-01-27 |
Uwe Hermann | hantek_6022be.c: Fix a code comment.
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Enable full port A as output on 6022BL
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Select enable OE0 instead of OE2 in 6022BL
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Switch from OE2/CTL2 to OE0/CTL0 on 6022BL
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Set PA7 in 6022BL again before sampling.
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Change I/O ports for voltage selection on 6022BL
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Set PA7 to high, to select analog mode.
|
commit | commitdiff | tree |
2017-01-27 |
Jan Losinski | Change probe cal pin for 6022BL to PC2
|
commit | commitdiff | tree |
2017-01-27 |
Sebastian Tabares... | Initial support for Hantek 6022BL
|
commit | commitdiff | tree |
2017-01-07 |
Gerhard Sittig | license: remove FSF postal address from boiler plate...
|
commit | commitdiff | tree |
2016-10-31 |
Uwe Hermann | configure.ac: Bump package version to 0.1.4.
|
commit | commitdiff | tree |
2016-10-31 |
Uwe Hermann | NEWS: Add list of user-visible changes so far.
|
commit | commitdiff | tree |
2016-10-31 |
Uwe Hermann | Increase FX2LAFW_VERSION_MINOR to 2.
|
commit | commitdiff | tree |
2016-10-31 |
Uwe Hermann | Use per-device USB serial number strings.
|
commit | commitdiff | tree |
2016-10-31 |
Uwe Hermann | Add "fx2lafw-" prefix to the 6022BE/DDS120 firmware...
|
commit | commitdiff | tree |
2016-10-31 |
Uwe Hermann | Use the same VID/PID for Hantek 6022BE and SainSmart...
|
commit | commitdiff | tree |
2016-10-12 |
Uwe Hermann | Makefile.am: Remove unneeded duplication.
|
commit | commitdiff | tree |
2016-10-08 |
Uwe Hermann | Add and use macros to simplify USB descriptor files.
|
commit | commitdiff | tree |
2016-09-03 |
Uwe Hermann | Makefile.am: Add dscr_hantek_6022be.inc to the tarball.
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | HACKING: Prefer git pull requests over mailing list...
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | README: Drop obsolete and unneeded section.
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | gpif-acquisition.c: Minor cosmetics, drop obsolete...
|
commit | commitdiff | tree |
2016-08-10 |
Paul Fertser | Refactor and bugfix the delay adding code for analog...
|
commit | commitdiff | tree |
2016-08-10 |
Paul Fertser | Remove bogus part of OUTPUT used for analog sampling
|
commit | commitdiff | tree |
2016-08-10 |
Paul Fertser | Fix typo in gpif_make_data_dp_state function name
|
commit | commitdiff | tree |
2016-08-10 |
Paul Fertser | Change arguments of gpif_make_delay_state() to remove...
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | dscr*.inc: Document polling intervals better.
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | dscr_hantek_6022be.inc: Fix incorrect comments, add...
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | dscr_hantek_6022be.inc: Change vendor string to "sigrok".
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | dscr_hantek_6022be.inc: Cosmetic and consistency changes.
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | dscr.inc: Shorten representation of two strings.
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | hantek-6022be/sainsmart-dds120: Hook up correct per...
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | Deduplicate hantek-6022be/sainsmart-dds120's dscr.inc.
|
commit | commitdiff | tree |
2016-08-10 |
Uwe Hermann | hantek-6022be/sainsmart-dds120: Use the same USB product...
|
commit | commitdiff | tree |
2016-07-12 |
Uwe Hermann | README: Mention the Sainsmart DDS120 firmware.
|
commit | commitdiff | tree |
2016-07-12 |
Uwe Hermann | Add CWAV USBee ZX firmware support.
|
commit | commitdiff | tree |
2016-05-25 |
Benjamin Larsson | Silence warnings
|
commit | commitdiff | tree |
2016-05-18 |
Uwe Hermann | Add a few more code comments.
|
commit | commitdiff | tree |
2016-05-18 |
Benjamin Larsson | fx2lafw: clock CTL1 the same as CTL2
|
commit | commitdiff | tree |
2016-05-04 |
Markus Siegert | Use 1D50:608E for open source Sainsmart DDS120 firmware
|
commit | commitdiff | tree |
2016-05-04 |
Benjamin Larsson | Support changing calibration pulse frequency
|
commit | commitdiff | tree |
2016-05-04 |
Benjamin Larsson | Add more sample rates
|
commit | commitdiff | tree |
2016-05-04 |
Benjamin Larsson | Add support for setting Sainsmart AC/DC coupling
|
commit | commitdiff | tree |
2016-05-04 |
Benjamin Larsson | Initial Sainsmart DDS120 firmware
|
commit | commitdiff | tree |
2016-04-29 |
Benjamin Larsson | Add CMD_START_FLAGS_CLK_CTL2 command flag
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hw/hantek-6022be/dscr.a51: License header cosmetics.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Simplify handle_vendorcommand().
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Minor cosmetics.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Make a few variables and functions...
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Move main() for consistency.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Adapt to fx2lafw coding style, minor...
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Drop unneeded debug code, random cruft.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | README: Update to mention the Hantek 6022BE firmware.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | hantek_6022be.c: Fix build error.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | Makefile.am: Hook up building of hantek-6022be.fw.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | Add FX2 firmware for the Hantek 6022BE USB scope.
|
commit | commitdiff | tree |
2016-03-10 |
Uwe Hermann | README: Update prebuilt firmware download location.
|
commit | commitdiff | tree |
2015-11-26 |
Uwe Hermann | configure.ac: Bump package version to 0.1.3.
|
commit | commitdiff | tree |
2015-11-26 |
Uwe Hermann | NEWS: Add list of user-visible changes so far.
|
commit | commitdiff | tree |
2015-11-26 |
Uwe Hermann | README: Any sdcc 3.x version works fine.
|
commit | commitdiff | tree |
2015-11-09 |
Daniel Elstner | Update git ignore list
|
commit | commitdiff | tree |
2015-11-09 |
Daniel Elstner | build: Switch to non-recursive make
|
commit | commitdiff | tree |
next |