JTAG: Add olimex_stm32-h103_init_reset_init_10s.sr.

[sigrok-dumps.git] / jtag / olimex_stm32-h103 / README

diff --git a/jtag/olimex_stm32-h103/README b/jtag/olimex_stm32-h103/README
index 19416af7d3cfdd032d8fc1ecee262ab1f9670735..58d7ddcb9b749ce788c93d28e00e20001e822e3d 100644 (file)
--- a/jtag/olimex_stm32-h103/README
+++ b/jtag/olimex_stm32-h103/README
@@ -68,3 +68,17 @@ The sigrok command line used was:
              -p '1=TRST,2=TDI,3=TMS,4=TCK,5=TDO,6=RST' -o <filename>
 
 
+olimex_stm32-h103_init_reset_init_10s.sr
+----------------------------------------
+
+The following OpenOCD command was used:
+
+  openocd -f interface/flossjtag-noeeprom.cfg -f board/olimex_stm32_h107.cfg \
+          -c "init" -c "reset init"
+
+The sigrok command line used was:
+
+  sigrok-cli -d 0:samplerate=4mhz --time 10s \
+             -p '1=TRST,2=TDI,3=TMS,4=TCK,5=TDO,6=RST' -o <filename>
+
+