can_fd: add dumps with BRS + extended ids

[sigrok-dumps.git] / can / can_fd / arbitrary_traffic / README

diff --git a/can/can_fd/arbitrary_traffic/README b/can/can_fd/arbitrary_traffic/README
index 8b98127ee5fe32dbb1b10ee7256ef550f13f2da4..a4c5f9cd354260adc90dcadeab7f6fca0563f5e2 100644 (file)
--- a/can/can_fd/arbitrary_traffic/README
+++ b/can/can_fd/arbitrary_traffic/README
@@ -12,7 +12,8 @@ https://en.wikipedia.org/wiki/CAN_FD
 Logic analyzer setup
 --------------------
 
 Logic analyzer setup
 --------------------
 

-The logic analyzer used was a Dreamsoucelab DSLogic Plus.
+The logic analyzer used was a Dreamsoucelab DSLogic Plus at a sample rate of
+100Mhz.

 
 Channel 0 was hooked up to a PEAK-PCAN-USB Pro CAN-FD device which has two
 CAN ports. Both ports were connected together using a selfmade circuit board.
 
 Channel 0 was hooked up to a PEAK-PCAN-USB Pro CAN-FD device which has two
 CAN ports. Both ports were connected together using a selfmade circuit board.


@@ -26,8 +27,8 @@ Both ports were opened by running two instances of the software. One for each
 port. All ACKs were handled by the participants.
 
 
 port. All ACKs were handled by the participants.
 
 

-can_fd_without_brs_8.sr
------------------------
+can_fd_std_without_brs_8.sr
+---------------------------

 
 This shows a single CAN-FD message with 8 Bytes of data without
 Bitrate Switch (BRS).
 
 This shows a single CAN-FD message with 8 Bytes of data without
 Bitrate Switch (BRS).


@@ -48,12 +49,128 @@ can_fd_without_brs_64.sr
 This shows a single CAN-FD message with 64 bytes of data without
 Bitrate Switch (BRS).
 
 This shows a single CAN-FD message with 64 bytes of data without
 Bitrate Switch (BRS).
 

-Nominal bitrate: 1M (CLK: 80MHz, BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
-Data bitrate: 2M (Ignored, since BRS is disabled)
-Extended frame: No
-BRS: no
-11898-1 ISO-mode: on
+Host Clock: 80Mhz
+Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
+Data Bitrate: 2M (Ignored, since BRS is disabled)
+Extended Frame: No
+BRS: No
+11898-1 ISO-Mode: On
+ID: 0x42
+Length: 8 Bytes
+Data is counting up from 0x00 to 0x07
+
+
+can_fd_std_without_brs_64.sr
+----------------------------
+
+This shows a single CAN-FD message with 64 Bytes of data without
+Bitrate Switch (BRS).
+
+Host Clock: 80Mhz
+Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
+Data Bitrate: 2M (Ignored, since BRS is disabled)
+Extended Frame: No
+BRS: No
+11898-1 ISO-Mode: On
+ID: 0x42
+Length: 64 Bytes
+Data is counting up from 0x00 to 0x3F
+
+
+can_fd_ext_without_brs_8.sr
+---------------------------
+
+This shows a single CAN-FD message with 8 Bytes of data without
+Bitrate Switch (BRS).
+
+Host Clock: 80Mhz
+Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
+Data Bitrate: 2M (Ignored, since BRS is disabled)
+Extended Frame: Yes
+BRS: No
+11898-1 ISO-Mode: On
+ID: 0x42
+Length: 8 Bytes
+Data is counting up from 0x00 to 0x07
+
+
+can_fd_ext_without_brs_64.sr
+----------------------------
+
+This shows a single CAN-FD message with 64 Bytes of data without
+Bitrate Switch (BRS).
+
+Host Clock: 80Mhz
+Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
+Data Bitrate: 2M (Ignored, since BRS is disabled)
+Extended Frame: Yes
+BRS: No
+11898-1 ISO-Mode: On
+ID: 0x42
+Length: 64 Bytes
+Data is counting up from 0x00 to 0x3F
+
+
+can_fd_std_brs_8.sr
+-------------------
+
+This shows a single CAN-FD message with 64 Bytes of data with Bitrate Switch (BRS).
+
+Host Clock: 80Mhz
+Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
+Data Bitrate: 2M (BRP: 4, TSeg1: 7, Tseg2: 2, Sjw: 1, SPP: 80%)
+Extended Frame: No
+BRS: Yes
+11898-1 ISO-Mode: On
+ID: 0x42
+Length: 8 Bytes
+Data is counting up from 0x00 to 0x07
+
+
+can_fd_std_brs_64.sr
+--------------------
+
+This shows a single CAN-FD message with 64 Bytes of data with Bitrate Switch (BRS).
+
+Host Clock: 80Mhz
+Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
+Data Bitrate: 2M (BRP: 4, TSeg1: 7, Tseg2: 2, Sjw: 1, SPP: 80%)
+Extended Frame: No
+BRS: Yes
+11898-1 ISO-Mode: On
+ID: 0x42
+Length: 64 Bytes
+Data is counting up from 0x00 to 0x3F
+
+
+can_fd_ext_brs_8.sr
+-------------------
+
+This shows a single CAN-FD message with 64 Bytes of data with Bitrate Switch (BRS).
+
+Host Clock: 80Mhz
+Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
+Data Bitrate: 2M (BRP: 4, TSeg1: 7, Tseg2: 2, Sjw: 1, SPP: 80%)
+Extended Frame: Yes
+BRS: Yes
+11898-1 ISO-Mode: On
+ID: 0x42
+Length: 8 Bytes
+Data is counting up from 0x00 to 0x07
+
+
+can_fd_ext_brs_64.sr
+--------------------
+
+This shows a single CAN-FD message with 64 Bytes of data with Bitrate Switch (BRS).
+
+Host Clock: 80Mhz
+Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
+Data Bitrate: 2M (BRP: 4, TSeg1: 7, Tseg2: 2, Sjw: 1, SPP: 80%)
+Extended Frame: Yes
+BRS: Yes
+11898-1 ISO-Mode: On

 ID: 0x42
 ID: 0x42

-Length: 64 bytes
-Data is counting up from 0x00 to 0x3F.
+Length: 64 Bytes
+Data is counting up from 0x00 to 0x3F