#define SERIALCOMM "115200/8n1"
-static const uint32_t drvopts[] = {
- SR_CONF_LOGIC_ANALYZER,
-};
-
static const uint32_t scanopts[] = {
SR_CONF_CONN,
SR_CONF_SERIALCOMM,
};
+static const uint32_t drvopts[] = {
+ SR_CONF_LOGIC_ANALYZER,
+};
+
static const uint32_t devopts[] = {
SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
#define RESPONSE_DELAY_US (10 * 1000)
-SR_PRIV struct sr_dev_driver ols_driver_info;
-
-static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx)
-{
- return std_init(di, sr_ctx, LOG_PREFIX);
-}
-
static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
struct sr_config *src;
struct sr_dev_inst *sdi;
- struct drv_context *drvc;
struct sr_serial_dev_inst *serial;
- GSList *l, *devices;
+ GSList *l;
int ret;
unsigned int i;
const char *conn, *serialcomm;
char buf[8];
- drvc = di->context;
-
- devices = NULL;
-
conn = serialcomm = NULL;
for (l = options; l; l = l->next) {
src = l->data;
if (serial_open(serial, SERIAL_RDWR) != SR_OK)
return NULL;
- ret = SR_OK;
- for (i = 0; i < 5; i++) {
- if ((ret = send_shortcommand(serial, CMD_RESET)) != SR_OK) {
- sr_err("Port %s is not writable.", conn);
- break;
- }
- }
- if (ret != SR_OK) {
+ if (ols_send_reset(serial) != SR_OK) {
serial_close(serial);
sr_err("Could not use port %s. Quitting.", conn);
return NULL;
sdi->vendor = g_strdup("Sump");
sdi->model = g_strdup("Logic Analyzer");
sdi->version = g_strdup("v1.0");
- sdi->driver = di;
for (i = 0; i < ARRAY_SIZE(ols_channel_names); i++)
sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE,
ols_channel_names[i]);
sdi->inst_type = SR_INST_SERIAL;
sdi->conn = serial;
- drvc->instances = g_slist_append(drvc->instances, sdi);
- devices = g_slist_append(devices, sdi);
-
serial_close(serial);
- return devices;
+ return std_scan_complete(di, g_slist_append(NULL, sdi));
}
-static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_get(uint32_t key, GVariant **data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
return SR_OK;
}
-static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_set(uint32_t key, GVariant *data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
uint16_t flag;
(void)cg;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
devc = sdi->priv;
switch (key) {
return ret;
}
-static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_list(uint32_t key, GVariant **data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
- GVariant *gvar, *grange[2];
- GVariantBuilder gvb;
+ GVariant *grange[2];
int num_ols_changrp, i;
- (void)cg;
-
switch (key) {
case SR_CONF_SCAN_OPTIONS:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
- break;
case SR_CONF_DEVICE_OPTIONS:
- if (!sdi)
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t));
- else
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
- break;
+ return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts);
case SR_CONF_SAMPLERATE:
- g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
- gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
- ARRAY_SIZE(samplerates), sizeof(uint64_t));
- g_variant_builder_add(&gvb, "{sv}", "samplerate-steps", gvar);
- *data = g_variant_builder_end(&gvb);
+ *data = std_gvar_samplerates_steps(ARRAY_AND_SIZE(samplerates));
break;
case SR_CONF_TRIGGER_MATCH:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
- trigger_matches, ARRAY_SIZE(trigger_matches),
- sizeof(int32_t));
+ *data = std_gvar_array_i32(ARRAY_AND_SIZE(trigger_matches));
break;
case SR_CONF_PATTERN_MODE:
- *data = g_variant_new_strv(patterns, ARRAY_SIZE(patterns));
+ *data = g_variant_new_strv(ARRAY_AND_SIZE(patterns));
break;
case SR_CONF_LIMIT_SAMPLES:
if (!sdi)
int num_ols_changrp;
int ret, i;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
devc = sdi->priv;
serial = sdi->conn;
return SR_ERR;
}
if (devc->num_stages > 0) {
+ /*
+ * According to http://mygizmos.org/ols/Logic-Sniffer-FPGA-Spec.pdf
+ * reset command must be send prior each arm command
+ */
+ sr_dbg("Send reset command before trigger configure");
+ if (ols_send_reset(serial) != SR_OK)
+ return SR_ERR;
+
delaycount = readcount * (1 - devc->capture_ratio / 100.0);
devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages;
for (i = 0; i <= devc->num_stages; i++) {
devc->cnt_bytes = devc->cnt_samples = devc->cnt_samples_rle = 0;
memset(devc->sample, 0, 4);
- std_session_send_df_header(sdi, LOG_PREFIX);
+ std_session_send_df_header(sdi);
/* If the device stops sending for longer than it takes to send a byte,
* that means it's finished. But wait at least 100 ms to be safe.
return SR_OK;
}
-SR_PRIV struct sr_dev_driver ols_driver_info = {
+static struct sr_dev_driver ols_driver_info = {
.name = "ols",
.longname = "Openbench Logic Sniffer",
.api_version = 1,
- .init = init,
+ .init = std_init,
.cleanup = std_cleanup,
.scan = scan,
.dev_list = std_dev_list,
- .dev_clear = NULL,
+ .dev_clear = std_dev_clear,
.config_get = config_get,
.config_set = config_set,
.config_list = config_list,
.dev_acquisition_stop = dev_acquisition_stop,
.context = NULL,
};
+SR_REGISTER_DEV_DRIVER(ols_driver_info);
projects / libsigrok.git / blobdiff