Reorganize project tree.

[libsigrok.git] / hardware / saleae-logic16 / protocol.h

diff --git a/hardware/saleae-logic16/protocol.h b/hardware/saleae-logic16/protocol.h
deleted file mode 100644 (file)
index 8a1ded8..0000000
--- a/hardware/saleae-logic16/protocol.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * This file is part of the libsigrok project.
- *
- * Copyright (C) 2013 Marcus Comstedt <marcus@mc.pp.se>
- * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
- * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef LIBSIGROK_HARDWARE_SALEAE_LOGIC16_PROTOCOL_H
-#define LIBSIGROK_HARDWARE_SALEAE_LOGIC16_PROTOCOL_H
-
-#include <stdint.h>
-#include <glib.h>
-#include "libsigrok.h"
-#include "libsigrok-internal.h"
-
-#define LOG_PREFIX "saleae-logic16"
-
-enum voltage_range {
-       VOLTAGE_RANGE_UNKNOWN,
-       VOLTAGE_RANGE_18_33_V,  /* 1.8V and 3.3V logic */
-       VOLTAGE_RANGE_5_V,      /* 5V logic */
-};
-
-/** Private, per-device-instance driver context. */
-struct dev_context {
-       /*
-        * Since we can't keep track of a Logic16 device after upgrading
-        * the firmware (it renumerates into a different device address
-        * after the upgrade) this is like a global lock. No device will open
-        * until a proper delay after the last device was upgraded.
-        */
-       int64_t fw_updated;
-
-       /** The currently configured samplerate of the device. */
-       uint64_t cur_samplerate;
-
-       /** Maximum number of samples to capture, if nonzero. */
-       uint64_t limit_samples;
-
-       /** The currently configured input voltage of the device. */
-       enum voltage_range cur_voltage_range;
-
-       /** The input voltage selected by the user. */
-       enum voltage_range selected_voltage_range;
-
-       /** Channels to use. */
-       uint16_t cur_channels;
-
-       /* EEPROM data from address 8. */
-       uint8_t eeprom_data[8];
-
-       int64_t sent_samples;
-       int submitted_transfers;
-       int empty_transfer_count;
-       int num_channels;
-       int cur_channel;
-       uint16_t channel_masks[16];
-       uint16_t channel_data[16];
-       uint8_t *convbuffer;
-       size_t convbuffer_size;
-       struct soft_trigger_logic *stl;
-       gboolean trigger_fired;
-
-       void *cb_data;
-       unsigned int num_transfers;
-       struct libusb_transfer **transfers;
-       struct sr_context *ctx;
-};
-
-SR_PRIV int logic16_setup_acquisition(const struct sr_dev_inst *sdi,
-                       uint64_t samplerate, uint16_t channels);
-SR_PRIV int logic16_start_acquisition(const struct sr_dev_inst *sdi);
-SR_PRIV int logic16_abort_acquisition(const struct sr_dev_inst *sdi);
-SR_PRIV int logic16_init_device(const struct sr_dev_inst *sdi);
-SR_PRIV void logic16_receive_transfer(struct libusb_transfer *transfer);
-
-#endif