+++ /dev/null
-/*
- * This file is part of the libsigrok project.
- *
- * Copyright (C) 2013 Marcus Comstedt <marcus@mc.pp.se>
- * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
- * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "protocol.h"
-
-#include <stdint.h>
-#include <string.h>
-#include <glib.h>
-#include <glib/gstdio.h>
-#include <stdio.h>
-#include <errno.h>
-#include <math.h>
-#include "libsigrok.h"
-#include "libsigrok-internal.h"
-
-#define FPGA_FIRMWARE_18 FIRMWARE_DIR"/saleae-logic16-fpga-18.bitstream"
-#define FPGA_FIRMWARE_33 FIRMWARE_DIR"/saleae-logic16-fpga-33.bitstream"
-
-#define MAX_SAMPLE_RATE SR_MHZ(100)
-#define MAX_4CH_SAMPLE_RATE SR_MHZ(50)
-#define MAX_7CH_SAMPLE_RATE SR_MHZ(40)
-#define MAX_8CH_SAMPLE_RATE SR_MHZ(32)
-#define MAX_10CH_SAMPLE_RATE SR_MHZ(25)
-#define MAX_13CH_SAMPLE_RATE SR_MHZ(16)
-
-#define BASE_CLOCK_0_FREQ SR_MHZ(100)
-#define BASE_CLOCK_1_FREQ SR_MHZ(160)
-
-#define COMMAND_START_ACQUISITION 1
-#define COMMAND_ABORT_ACQUISITION_ASYNC 2
-#define COMMAND_WRITE_EEPROM 6
-#define COMMAND_READ_EEPROM 7
-#define COMMAND_WRITE_LED_TABLE 0x7a
-#define COMMAND_SET_LED_MODE 0x7b
-#define COMMAND_RETURN_TO_BOOTLOADER 0x7c
-#define COMMAND_ABORT_ACQUISITION_SYNC 0x7d
-#define COMMAND_FPGA_UPLOAD_INIT 0x7e
-#define COMMAND_FPGA_UPLOAD_SEND_DATA 0x7f
-#define COMMAND_FPGA_WRITE_REGISTER 0x80
-#define COMMAND_FPGA_READ_REGISTER 0x81
-#define COMMAND_GET_REVID 0x82
-
-#define WRITE_EEPROM_COOKIE1 0x42
-#define WRITE_EEPROM_COOKIE2 0x55
-#define READ_EEPROM_COOKIE1 0x33
-#define READ_EEPROM_COOKIE2 0x81
-#define ABORT_ACQUISITION_SYNC_PATTERN 0x55
-
-#define MAX_EMPTY_TRANSFERS 64
-
-static void encrypt(uint8_t *dest, const uint8_t *src, uint8_t cnt)
-{
- uint8_t state1 = 0x9b, state2 = 0x54;
- uint8_t t, v;
- int i;
-
- for (i = 0; i < cnt; i++) {
- v = src[i];
- t = (((v ^ state2 ^ 0x2b) - 0x05) ^ 0x35) - 0x39;
- t = (((t ^ state1 ^ 0x5a) - 0xb0) ^ 0x38) - 0x45;
- dest[i] = state2 = t;
- state1 = v;
- }
-}
-
-static void decrypt(uint8_t *dest, const uint8_t *src, uint8_t cnt)
-{
- uint8_t state1 = 0x9b, state2 = 0x54;
- uint8_t t, v;
- int i;
-
- for (i = 0; i < cnt; i++) {
- v = src[i];
- t = (((v + 0x45) ^ 0x38) + 0xb0) ^ 0x5a ^ state1;
- t = (((t + 0x39) ^ 0x35) + 0x05) ^ 0x2b ^ state2;
- dest[i] = state1 = t;
- state2 = v;
- }
-}
-
-static int do_ep1_command(const struct sr_dev_inst *sdi,
- const uint8_t *command, uint8_t cmd_len,
- uint8_t *reply, uint8_t reply_len)
-{
- uint8_t buf[64];
- struct sr_usb_dev_inst *usb;
- int ret, xfer;
-
- usb = sdi->conn;
-
- if (cmd_len < 1 || cmd_len > 64 || reply_len > 64 ||
- command == NULL || (reply_len > 0 && reply == NULL))
- return SR_ERR_ARG;
-
- encrypt(buf, command, cmd_len);
-
- ret = libusb_bulk_transfer(usb->devhdl, 1, buf, cmd_len, &xfer, 1000);
- if (ret != 0) {
- sr_dbg("Failed to send EP1 command 0x%02x: %s.",
- command[0], libusb_error_name(ret));
- return SR_ERR;
- }
- if (xfer != cmd_len) {
- sr_dbg("Failed to send EP1 command 0x%02x: incorrect length "
- "%d != %d.", xfer, cmd_len);
- return SR_ERR;
- }
-
- if (reply_len == 0)
- return SR_OK;
-
- ret = libusb_bulk_transfer(usb->devhdl, 0x80 | 1, buf, reply_len,
- &xfer, 1000);
- if (ret != 0) {
- sr_dbg("Failed to receive reply to EP1 command 0x%02x: %s.",
- command[0], libusb_error_name(ret));
- return SR_ERR;
- }
- if (xfer != reply_len) {
- sr_dbg("Failed to receive reply to EP1 command 0x%02x: "
- "incorrect length %d != %d.", xfer, reply_len);
- return SR_ERR;
- }
-
- decrypt(reply, buf, reply_len);
-
- return SR_OK;
-}
-
-static int read_eeprom(const struct sr_dev_inst *sdi,
- uint8_t address, uint8_t length, uint8_t *buf)
-{
- uint8_t command[5] = {
- COMMAND_READ_EEPROM,
- READ_EEPROM_COOKIE1,
- READ_EEPROM_COOKIE2,
- address,
- length,
- };
-
- return do_ep1_command(sdi, command, 5, buf, length);
-}
-
-static int upload_led_table(const struct sr_dev_inst *sdi,
- const uint8_t *table, uint8_t offset, uint8_t cnt)
-{
- uint8_t chunk, command[64];
- int ret;
-
- if (cnt < 1 || cnt + offset > 64 || table == NULL)
- return SR_ERR_ARG;
-
- while (cnt > 0) {
- chunk = (cnt > 32 ? 32 : cnt);
-
- command[0] = COMMAND_WRITE_LED_TABLE;
- command[1] = offset;
- command[2] = chunk;
- memcpy(command + 3, table, chunk);
-
- ret = do_ep1_command(sdi, command, 3 + chunk, NULL, 0);
- if (ret != SR_OK)
- return ret;
-
- table += chunk;
- offset += chunk;
- cnt -= chunk;
- }
-
- return SR_OK;
-}
-
-static int set_led_mode(const struct sr_dev_inst *sdi,
- uint8_t animate, uint16_t t2reload, uint8_t div,
- uint8_t repeat)
-{
- uint8_t command[6] = {
- COMMAND_SET_LED_MODE,
- animate,
- t2reload & 0xff,
- t2reload >> 8,
- div,
- repeat,
- };
-
- return do_ep1_command(sdi, command, 6, NULL, 0);
-}
-
-static int read_fpga_register(const struct sr_dev_inst *sdi,
- uint8_t address, uint8_t *value)
-{
- uint8_t command[3] = {
- COMMAND_FPGA_READ_REGISTER,
- 1,
- address,
- };
-
- return do_ep1_command(sdi, command, 3, value, 1);
-}
-
-static int write_fpga_registers(const struct sr_dev_inst *sdi,
- uint8_t (*regs)[2], uint8_t cnt)
-{
- uint8_t command[64];
- int i;
-
- if (cnt < 1 || cnt > 31)
- return SR_ERR_ARG;
-
- command[0] = COMMAND_FPGA_WRITE_REGISTER;
- command[1] = cnt;
- for (i = 0; i < cnt; i++) {
- command[2 + 2 * i] = regs[i][0];
- command[3 + 2 * i] = regs[i][1];
- }
-
- return do_ep1_command(sdi, command, 2 * (cnt + 1), NULL, 0);
-}
-
-static int write_fpga_register(const struct sr_dev_inst *sdi,
- uint8_t address, uint8_t value)
-{
- uint8_t regs[2] = { address, value };
-
- return write_fpga_registers(sdi, ®s, 1);
-}
-
-static uint8_t map_eeprom_data(uint8_t v)
-{
- return (((v ^ 0x80) + 0x44) ^ 0xd5) + 0x69;
-}
-
-static int prime_fpga(const struct sr_dev_inst *sdi)
-{
- uint8_t eeprom_data[16];
- uint8_t old_reg_10, version;
- uint8_t regs[8][2] = {
- {10, 0x00},
- {10, 0x40},
- {12, 0},
- {10, 0xc0},
- {10, 0x40},
- {6, 0},
- {7, 1},
- {7, 0}
- };
- int i, ret;
-
- if ((ret = read_eeprom(sdi, 16, 16, eeprom_data)) != SR_OK)
- return ret;
-
- if ((ret = read_fpga_register(sdi, 10, &old_reg_10)) != SR_OK)
- return ret;
-
- regs[0][1] = (old_reg_10 &= 0x7f);
- regs[1][1] |= old_reg_10;
- regs[3][1] |= old_reg_10;
- regs[4][1] |= old_reg_10;
-
- for (i = 0; i < 16; i++) {
- regs[2][1] = eeprom_data[i];
- regs[5][1] = map_eeprom_data(eeprom_data[i]);
- if (i)
- ret = write_fpga_registers(sdi, ®s[2], 6);
- else
- ret = write_fpga_registers(sdi, ®s[0], 8);
- if (ret != SR_OK)
- return ret;
- }
-
- if ((ret = write_fpga_register(sdi, 10, old_reg_10)) != SR_OK)
- return ret;
-
- if ((ret = read_fpga_register(sdi, 0, &version)) != SR_OK)
- return ret;
-
- if (version != 0x10) {
- sr_err("Invalid FPGA bitstream version: 0x%02x != 0x10.", version);
- return SR_ERR;
- }
-
- return SR_OK;
-}
-
-static void make_heartbeat(uint8_t *table, int len)
-{
- int i, j;
-
- memset(table, 0, len);
- len >>= 3;
- for (i = 0; i < 2; i++)
- for (j = 0; j < len; j++)
- *table++ = sin(j * M_PI / len) * 255;
-}
-
-static int configure_led(const struct sr_dev_inst *sdi)
-{
- uint8_t table[64];
- int ret;
-
- make_heartbeat(table, 64);
- if ((ret = upload_led_table(sdi, table, 0, 64)) != SR_OK)
- return ret;
-
- return set_led_mode(sdi, 1, 6250, 0, 1);
-}
-
-static int upload_fpga_bitstream(const struct sr_dev_inst *sdi,
- enum voltage_range vrange)
-{
- struct dev_context *devc;
- int offset, chunksize, ret;
- const char *filename;
- uint8_t len, buf[256 * 62], command[64];
- FILE *fw;
-
- devc = sdi->priv;
-
- if (devc->cur_voltage_range == vrange)
- return SR_OK;
-
- switch (vrange) {
- case VOLTAGE_RANGE_18_33_V:
- filename = FPGA_FIRMWARE_18;
- break;
- case VOLTAGE_RANGE_5_V:
- filename = FPGA_FIRMWARE_33;
- break;
- default:
- sr_err("Unsupported voltage range.");
- return SR_ERR;
- }
-
- sr_info("Uploading FPGA bitstream at %s.", filename);
- if ((fw = g_fopen(filename, "rb")) == NULL) {
- sr_err("Unable to open bitstream file %s for reading: %s.",
- filename, strerror(errno));
- return SR_ERR;
- }
-
- buf[0] = COMMAND_FPGA_UPLOAD_INIT;
- if ((ret = do_ep1_command(sdi, buf, 1, NULL, 0)) != SR_OK) {
- fclose(fw);
- return ret;
- }
-
- while (1) {
- chunksize = fread(buf, 1, sizeof(buf), fw);
- if (chunksize == 0)
- break;
-
- for (offset = 0; offset < chunksize; offset += 62) {
- len = (offset + 62 > chunksize ?
- chunksize - offset : 62);
- command[0] = COMMAND_FPGA_UPLOAD_SEND_DATA;
- command[1] = len;
- memcpy(command + 2, buf + offset, len);
- ret = do_ep1_command(sdi, command, len + 2, NULL, 0);
- if (ret != SR_OK) {
- fclose(fw);
- return ret;
- }
- }
-
- sr_info("Uploaded %d bytes.", chunksize);
- }
- fclose(fw);
- sr_info("FPGA bitstream upload done.");
-
- if ((ret = prime_fpga(sdi)) != SR_OK)
- return ret;
-
- if ((ret = configure_led(sdi)) != SR_OK)
- return ret;
-
- devc->cur_voltage_range = vrange;
- return SR_OK;
-}
-
-static int abort_acquisition_sync(const struct sr_dev_inst *sdi)
-{
- static const uint8_t command[2] = {
- COMMAND_ABORT_ACQUISITION_SYNC,
- ABORT_ACQUISITION_SYNC_PATTERN,
- };
- uint8_t reply, expected_reply;
- int ret;
-
- if ((ret = do_ep1_command(sdi, command, 2, &reply, 1)) != SR_OK)
- return ret;
-
- expected_reply = ~command[1];
- if (reply != expected_reply) {
- sr_err("Invalid response for abort acquisition command: "
- "0x%02x != 0x%02x.", reply, expected_reply);
- return SR_ERR;
- }
-
- return SR_OK;
-}
-
-SR_PRIV int logic16_setup_acquisition(const struct sr_dev_inst *sdi,
- uint64_t samplerate, uint16_t channels)
-{
- uint8_t clock_select, reg1, reg10;
- uint64_t div;
- int i, ret, nchan = 0;
- struct dev_context *devc;
-
- devc = sdi->priv;
-
- if (samplerate == 0 || samplerate > MAX_SAMPLE_RATE) {
- sr_err("Unable to sample at %" PRIu64 "Hz.", samplerate);
- return SR_ERR;
- }
-
- if (BASE_CLOCK_0_FREQ % samplerate == 0 &&
- (div = BASE_CLOCK_0_FREQ / samplerate) <= 256) {
- clock_select = 0;
- } else if (BASE_CLOCK_1_FREQ % samplerate == 0 &&
- (div = BASE_CLOCK_1_FREQ / samplerate) <= 256) {
- clock_select = 1;
- } else {
- sr_err("Unable to sample at %" PRIu64 "Hz.", samplerate);
- return SR_ERR;
- }
-
- for (i = 0; i < 16; i++)
- if (channels & (1U << i))
- nchan++;
-
- if ((nchan >= 13 && samplerate > MAX_13CH_SAMPLE_RATE) ||
- (nchan >= 10 && samplerate > MAX_10CH_SAMPLE_RATE) ||
- (nchan >= 8 && samplerate > MAX_8CH_SAMPLE_RATE) ||
- (nchan >= 7 && samplerate > MAX_7CH_SAMPLE_RATE) ||
- (nchan >= 4 && samplerate > MAX_4CH_SAMPLE_RATE)) {
- sr_err("Unable to sample at %" PRIu64 "Hz "
- "with this many channels.", samplerate);
- return SR_ERR;
- }
-
- ret = upload_fpga_bitstream(sdi, devc->selected_voltage_range);
- if (ret != SR_OK)
- return ret;
-
- if ((ret = read_fpga_register(sdi, 1, ®1)) != SR_OK)
- return ret;
-
- if (reg1 != 0x08) {
- sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x08.", reg1);
- return SR_ERR;
- }
-
- if ((ret = write_fpga_register(sdi, 1, 0x40)) != SR_OK)
- return ret;
-
- if ((ret = write_fpga_register(sdi, 10, clock_select)) != SR_OK)
- return ret;
-
- if ((ret = write_fpga_register(sdi, 4, (uint8_t)(div - 1))) != SR_OK)
- return ret;
-
- if ((ret = write_fpga_register(sdi, 2, (uint8_t)(channels & 0xff))) != SR_OK)
- return ret;
-
- if ((ret = write_fpga_register(sdi, 3, (uint8_t)(channels >> 8))) != SR_OK)
- return ret;
-
- if ((ret = write_fpga_register(sdi, 1, 0x42)) != SR_OK)
- return ret;
-
- if ((ret = write_fpga_register(sdi, 1, 0x40)) != SR_OK)
- return ret;
-
- if ((ret = read_fpga_register(sdi, 1, ®1)) != SR_OK)
- return ret;
-
- if (reg1 != 0x48) {
- sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x48.", reg1);
- return SR_ERR;
- }
-
- if ((ret = read_fpga_register(sdi, 10, ®10)) != SR_OK)
- return ret;
-
- if (reg10 != clock_select) {
- sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x%02x.",
- reg10, clock_select);
- return SR_ERR;
- }
-
- return SR_OK;
-}
-
-SR_PRIV int logic16_start_acquisition(const struct sr_dev_inst *sdi)
-{
- static const uint8_t command[1] = {
- COMMAND_START_ACQUISITION,
- };
- int ret;
-
- if ((ret = do_ep1_command(sdi, command, 1, NULL, 0)) != SR_OK)
- return ret;
-
- return write_fpga_register(sdi, 1, 0x41);
-}
-
-SR_PRIV int logic16_abort_acquisition(const struct sr_dev_inst *sdi)
-{
- static const uint8_t command[1] = {
- COMMAND_ABORT_ACQUISITION_ASYNC,
- };
- int ret;
- uint8_t reg1, reg8, reg9;
-
- if ((ret = do_ep1_command(sdi, command, 1, NULL, 0)) != SR_OK)
- return ret;
-
- if ((ret = write_fpga_register(sdi, 1, 0x00)) != SR_OK)
- return ret;
-
- if ((ret = read_fpga_register(sdi, 1, ®1)) != SR_OK)
- return ret;
-
- if (reg1 != 0x08) {
- sr_dbg("Invalid state at acquisition stop: 0x%02x != 0x08.", reg1);
- return SR_ERR;
- }
-
- if ((ret = read_fpga_register(sdi, 8, ®8)) != SR_OK)
- return ret;
-
- if ((ret = read_fpga_register(sdi, 9, ®9)) != SR_OK)
- return ret;
-
- return SR_OK;
-}
-
-SR_PRIV int logic16_init_device(const struct sr_dev_inst *sdi)
-{
- struct dev_context *devc;
- int ret;
-
- devc = sdi->priv;
-
- devc->cur_voltage_range = VOLTAGE_RANGE_UNKNOWN;
-
- if ((ret = abort_acquisition_sync(sdi)) != SR_OK)
- return ret;
-
- if ((ret = read_eeprom(sdi, 8, 8, devc->eeprom_data)) != SR_OK)
- return ret;
-
- ret = upload_fpga_bitstream(sdi, devc->selected_voltage_range);
- if (ret != SR_OK)
- return ret;
-
- return SR_OK;
-}
-
-static void finish_acquisition(struct sr_dev_inst *sdi)
-{
- struct sr_datafeed_packet packet;
- struct dev_context *devc;
-
- devc = sdi->priv;
-
- /* Terminate session. */
- packet.type = SR_DF_END;
- sr_session_send(devc->cb_data, &packet);
-
- /* Remove fds from polling. */
- usb_source_remove(sdi->session, devc->ctx);
-
- devc->num_transfers = 0;
- g_free(devc->transfers);
- g_free(devc->convbuffer);
- if (devc->stl) {
- soft_trigger_logic_free(devc->stl);
- devc->stl = NULL;
- }
-}
-
-static void free_transfer(struct libusb_transfer *transfer)
-{
- struct sr_dev_inst *sdi;
- struct dev_context *devc;
- unsigned int i;
-
- sdi = transfer->user_data;
- devc = sdi->priv;
-
- g_free(transfer->buffer);
- transfer->buffer = NULL;
- libusb_free_transfer(transfer);
-
- for (i = 0; i < devc->num_transfers; i++) {
- if (devc->transfers[i] == transfer) {
- devc->transfers[i] = NULL;
- break;
- }
- }
-
- devc->submitted_transfers--;
- if (devc->submitted_transfers == 0)
- finish_acquisition(sdi);
-}
-
-static void resubmit_transfer(struct libusb_transfer *transfer)
-{
- int ret;
-
- if ((ret = libusb_submit_transfer(transfer)) == LIBUSB_SUCCESS)
- return;
-
- free_transfer(transfer);
- /* TODO: Stop session? */
-
- sr_err("%s: %s", __func__, libusb_error_name(ret));
-}
-
-static size_t convert_sample_data(struct dev_context *devc,
- uint8_t *dest, size_t destcnt, const uint8_t *src, size_t srccnt)
-{
- uint16_t *channel_data;
- int i, cur_channel;
- size_t ret = 0;
- uint16_t sample, channel_mask;
-
- srccnt /= 2;
-
- channel_data = devc->channel_data;
- cur_channel = devc->cur_channel;
-
- while (srccnt--) {
- sample = src[0] | (src[1] << 8);
- src += 2;
-
- channel_mask = devc->channel_masks[cur_channel];
-
- for (i = 15; i >= 0; --i, sample >>= 1)
- if (sample & 1)
- channel_data[i] |= channel_mask;
-
- if (++cur_channel == devc->num_channels) {
- cur_channel = 0;
- if (destcnt < 16 * 2) {
- sr_err("Conversion buffer too small!");
- break;
- }
- memcpy(dest, channel_data, 16 * 2);
- memset(channel_data, 0, 16 * 2);
- dest += 16 * 2;
- ret += 16;
- destcnt -= 16 * 2;
- }
- }
-
- devc->cur_channel = cur_channel;
-
- return ret;
-}
-
-SR_PRIV void logic16_receive_transfer(struct libusb_transfer *transfer)
-{
- gboolean packet_has_error = FALSE;
- struct sr_datafeed_packet packet;
- struct sr_datafeed_logic logic;
- struct sr_dev_inst *sdi;
- struct dev_context *devc;
- size_t new_samples, num_samples;
- int trigger_offset;
-
- sdi = transfer->user_data;
- devc = sdi->priv;
-
- /*
- * If acquisition has already ended, just free any queued up
- * transfer that come in.
- */
- if (devc->sent_samples < 0) {
- free_transfer(transfer);
- return;
- }
-
- sr_info("receive_transfer(): status %d received %d bytes.",
- transfer->status, transfer->actual_length);
-
- switch (transfer->status) {
- case LIBUSB_TRANSFER_NO_DEVICE:
- devc->sent_samples = -2;
- free_transfer(transfer);
- return;
- case LIBUSB_TRANSFER_COMPLETED:
- case LIBUSB_TRANSFER_TIMED_OUT: /* We may have received some data though. */
- break;
- default:
- packet_has_error = TRUE;
- break;
- }
-
- if (transfer->actual_length & 1) {
- sr_err("Got an odd number of bytes from the device. "
- "This should not happen.");
- /* Bail out right away. */
- packet_has_error = TRUE;
- devc->empty_transfer_count = MAX_EMPTY_TRANSFERS;
- }
-
- if (transfer->actual_length == 0 || packet_has_error) {
- devc->empty_transfer_count++;
- if (devc->empty_transfer_count > MAX_EMPTY_TRANSFERS) {
- /*
- * The FX2 gave up. End the acquisition, the frontend
- * will work out that the samplecount is short.
- */
- devc->sent_samples = -2;
- free_transfer(transfer);
- } else {
- resubmit_transfer(transfer);
- }
- return;
- } else {
- devc->empty_transfer_count = 0;
- }
-
- new_samples = convert_sample_data(devc, devc->convbuffer,
- devc->convbuffer_size, transfer->buffer, transfer->actual_length);
-
- if (new_samples > 0) {
- if (devc->trigger_fired) {
- /* Send the incoming transfer to the session bus. */
- packet.type = SR_DF_LOGIC;
- packet.payload = &logic;
- if (devc->limit_samples &&
- new_samples > devc->limit_samples - devc->sent_samples)
- new_samples = devc->limit_samples - devc->sent_samples;
- logic.length = new_samples * 2;
- logic.unitsize = 2;
- logic.data = devc->convbuffer;
- sr_session_send(devc->cb_data, &packet);
- devc->sent_samples += new_samples;
- } else {
- trigger_offset = soft_trigger_logic_check(devc->stl,
- devc->convbuffer, new_samples * 2);
- if (trigger_offset > -1) {
- packet.type = SR_DF_LOGIC;
- packet.payload = &logic;
- num_samples = new_samples - trigger_offset;
- if (devc->limit_samples &&
- num_samples > devc->limit_samples - devc->sent_samples)
- num_samples = devc->limit_samples - devc->sent_samples;
- logic.length = num_samples * 2;
- logic.unitsize = 2;
- logic.data = devc->convbuffer + trigger_offset * 2;
- sr_session_send(devc->cb_data, &packet);
- devc->sent_samples += num_samples;
-
- devc->trigger_fired = TRUE;
- }
- }
-
- if (devc->limit_samples &&
- (uint64_t)devc->sent_samples >= devc->limit_samples) {
- devc->sent_samples = -2;
- free_transfer(transfer);
- return;
- }
- }
-
- resubmit_transfer(transfer);
-}
projects / libsigrok.git / blobdiff