]> sigrok.org Git - libsigrok.git/blobdiff - hardware/lascar-el-usb/protocol.h
Reorganize project tree.
[libsigrok.git] / hardware / lascar-el-usb / protocol.h
diff --git a/hardware/lascar-el-usb/protocol.h b/hardware/lascar-el-usb/protocol.h
deleted file mode 100644 (file)
index a94bd8a..0000000
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * This file is part of the libsigrok project.
- *
- * Copyright (C) 2012 Bert Vermeulen <bert@biot.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef LIBSIGROK_HARDWARE_LASCAR_EL_USB_PROTOCOL_H
-#define LIBSIGROK_HARDWARE_LASCAR_EL_USB_PROTOCOL_H
-
-#include <stdint.h>
-#include "libsigrok.h"
-#include "libsigrok-internal.h"
-
-#define LOG_PREFIX "lascar-el-usb"
-
-#define LASCAR_VENDOR "Lascar"
-#define LASCAR_INTERFACE 0
-#define LASCAR_EP_IN 0x82
-#define LASCAR_EP_OUT 2
-/* Max 100ms for a device to positively identify. */
-#define SCAN_TIMEOUT 100000
-#define MAX_CONFIGBLOCK_SIZE 256
-
-/** Private, per-device-instance driver context. */
-struct dev_context {
-       void *cb_data;
-       const struct elusb_profile *profile;
-       /* Generic EL-USB */
-       unsigned char config[MAX_CONFIGBLOCK_SIZE];
-       unsigned int log_size;
-       unsigned int rcvd_bytes;
-       unsigned int sample_size;
-       unsigned int logged_samples;
-       unsigned int rcvd_samples;
-       uint64_t limit_samples;
-       /* Model-specific */
-       /* EL-USB-CO: these are something like scaling and calibration values
-        * fixed per device, used to convert the sample values to CO ppm. */
-       float co_high;
-       float co_low;
-       /* Temperature units as stored in the device config. */
-       int temp_unit;
-};
-
-enum {
-       LOG_UNSUPPORTED,
-       LOG_TEMP_RH,
-       LOG_CO,
-};
-
-struct elusb_profile {
-       int modelid;
-       char *modelname;
-       int logformat;
-};
-
-SR_PRIV int lascar_get_config(libusb_device_handle *dev_hdl,
-               unsigned char *configblock, int *configlen);
-SR_PRIV struct sr_dev_inst *lascar_scan(int bus, int address);
-SR_PRIV int lascar_el_usb_handle_events(int fd, int revents, void *cb_data);
-SR_PRIV void lascar_el_usb_receive_transfer(struct libusb_transfer *transfer);
-SR_PRIV int lascar_start_logging(const struct sr_dev_inst *sdi);
-SR_PRIV int lascar_stop_logging(const struct sr_dev_inst *sdi);
-SR_PRIV int lascar_is_logging(const struct sr_dev_inst *sdi);
-SR_PRIV int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data);
-
-#endif