]> sigrok.org Git - libsigrok.git/blobdiff - hardware/ikalogic-scanalogic2/api.c
Reorganize project tree.
[libsigrok.git] / hardware / ikalogic-scanalogic2 / api.c
diff --git a/hardware/ikalogic-scanalogic2/api.c b/hardware/ikalogic-scanalogic2/api.c
deleted file mode 100644 (file)
index b4c697f..0000000
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * This file is part of the libsigrok project.
- *
- * Copyright (C) 2013 Marc Schink <sigrok-dev@marcschink.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "protocol.h"
-
-static const int hwcaps[] = {
-       SR_CONF_LOGIC_ANALYZER,
-       SR_CONF_SAMPLERATE,
-       SR_CONF_LIMIT_SAMPLES,
-       SR_CONF_TRIGGER_MATCH,
-       SR_CONF_CAPTURE_RATIO,
-};
-
-static const int32_t trigger_matches[] = {
-       SR_TRIGGER_RISING,
-       SR_TRIGGER_FALLING,
-       SR_TRIGGER_EDGE,
-};
-
-SR_PRIV const uint64_t sl2_samplerates[NUM_SAMPLERATES] = {
-       SR_KHZ(1.25),
-       SR_KHZ(10),
-       SR_KHZ(50),
-       SR_KHZ(100),
-       SR_KHZ(250),
-       SR_KHZ(500),
-       SR_MHZ(1),
-       SR_MHZ(2.5),
-       SR_MHZ(5),
-       SR_MHZ(10),
-       SR_MHZ(20),
-};
-
-static const char *channel_names[NUM_CHANNELS + 1] = {
-       "0", "1", "2", "3",
-       NULL,
-};
-
-SR_PRIV struct sr_dev_driver ikalogic_scanalogic2_driver_info;
-static struct sr_dev_driver *di = &ikalogic_scanalogic2_driver_info;
-
-static int init(struct sr_context *sr_ctx)
-{
-       return std_init(sr_ctx, di, LOG_PREFIX);
-}
-
-static GSList *scan(GSList *options)
-{
-       GSList *usb_devices, *devices, *l;
-       struct drv_context *drvc;
-       struct sr_dev_inst *sdi;
-       struct sr_channel *ch;
-       struct dev_context *devc;
-       struct sr_usb_dev_inst *usb;
-       struct device_info dev_info;
-       int ret, device_index, i;
-       char *fw_ver_str;
-
-       (void)options;
-
-       devices = NULL;
-       drvc = di->priv;
-       drvc->instances = NULL;
-       device_index = 0;
-
-       usb_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, USB_VID_PID);
-
-       if (usb_devices == NULL)
-               return NULL;
-
-       for (l = usb_devices; l; l = l->next) {
-               usb = l->data;
-
-               if ((ret = sl2_get_device_info(*usb, &dev_info)) < 0) {
-                       sr_warn("Failed to get device information: %d.", ret);
-                       sr_usb_dev_inst_free(usb);
-                       continue;
-               }
-
-               if (!(devc = g_try_malloc(sizeof(struct dev_context)))) {
-                       sr_err("Device instance malloc failed.");
-                       sr_usb_dev_inst_free(usb);
-                       continue;
-               }
-
-               if (!(devc->xfer_in = libusb_alloc_transfer(0))) {
-                       sr_err("Transfer malloc failed.");
-                       sr_usb_dev_inst_free(usb);
-                       g_free(devc);
-                       continue;
-               }
-
-               if (!(devc->xfer_out = libusb_alloc_transfer(0))) {
-                       sr_err("Transfer malloc failed.");
-                       sr_usb_dev_inst_free(usb);
-                       libusb_free_transfer(devc->xfer_in);
-                       g_free(devc);
-                       continue;
-               }
-
-               fw_ver_str = g_strdup_printf("%u.%u", dev_info.fw_ver_major,
-                       dev_info.fw_ver_minor);
-               if (!fw_ver_str) {
-                       sr_err("Firmware string malloc failed.");
-                       sr_usb_dev_inst_free(usb);
-                       libusb_free_transfer(devc->xfer_in);
-                       libusb_free_transfer(devc->xfer_out);
-                       g_free(devc);
-                       continue;
-               }
-
-               sdi = sr_dev_inst_new(device_index, SR_ST_INACTIVE, VENDOR_NAME,
-                       MODEL_NAME, fw_ver_str);
-               g_free(fw_ver_str);
-               if (!sdi) {
-                       sr_err("sr_dev_inst_new failed.");
-                       sr_usb_dev_inst_free(usb);
-                       libusb_free_transfer(devc->xfer_in);
-                       libusb_free_transfer(devc->xfer_out);
-                       g_free(devc);
-                       continue;
-               }
-
-               sdi->priv = devc;
-               sdi->driver = di;
-               sdi->inst_type = SR_INST_USB;
-               sdi->conn = usb;
-
-               for (i = 0; channel_names[i]; i++) {
-                       ch = sr_channel_new(i, SR_CHANNEL_LOGIC, TRUE,
-                               channel_names[i]);
-                       sdi->channels = g_slist_append(sdi->channels, ch);
-                       devc->channels[i] = ch;
-               }
-
-               devc->state = STATE_IDLE;
-               devc->next_state = STATE_IDLE;
-
-               /* Set default samplerate. */
-               sl2_set_samplerate(sdi, DEFAULT_SAMPLERATE);
-
-               /* Set default capture ratio. */
-               devc->capture_ratio = 0;
-
-               /* Set default after trigger delay. */
-               devc->after_trigger_delay = 0;
-
-               memset(devc->xfer_buf_in, 0, LIBUSB_CONTROL_SETUP_SIZE +
-                       PACKET_LENGTH);
-               memset(devc->xfer_buf_out, 0, LIBUSB_CONTROL_SETUP_SIZE +
-                       PACKET_LENGTH);
-
-               libusb_fill_control_setup(devc->xfer_buf_in,
-                       USB_REQUEST_TYPE_IN, USB_HID_GET_REPORT,
-                       USB_HID_REPORT_TYPE_FEATURE, USB_INTERFACE,
-                       PACKET_LENGTH);
-               libusb_fill_control_setup(devc->xfer_buf_out,
-                       USB_REQUEST_TYPE_OUT, USB_HID_SET_REPORT,
-                       USB_HID_REPORT_TYPE_FEATURE, USB_INTERFACE,
-                       PACKET_LENGTH);
-
-               devc->xfer_data_in = devc->xfer_buf_in +
-                       LIBUSB_CONTROL_SETUP_SIZE;
-               devc->xfer_data_out = devc->xfer_buf_out +
-                       LIBUSB_CONTROL_SETUP_SIZE;
-
-               drvc->instances = g_slist_append(drvc->instances, sdi);
-               devices = g_slist_append(devices, sdi);
-
-               device_index++;
-       }
-
-       g_slist_free(usb_devices);
-
-       return devices;
-}
-
-static GSList *dev_list(void)
-{
-       return ((struct drv_context *)(di->priv))->instances;
-}
-
-static void clear_dev_context(void *priv)
-{
-       struct dev_context *devc;
-
-       devc = priv;
-
-       sr_dbg("Device context cleared.");
-
-       libusb_free_transfer(devc->xfer_in);
-       libusb_free_transfer(devc->xfer_out);
-       g_free(devc);
-}
-
-static int dev_clear(void)
-{
-       return std_dev_clear(di, &clear_dev_context);
-}
-
-static int dev_open(struct sr_dev_inst *sdi)
-{
-       struct drv_context *drvc;
-       struct dev_context *devc;
-       struct sr_usb_dev_inst *usb;
-       uint8_t buffer[PACKET_LENGTH];
-       int ret;
-
-       if (!(drvc = di->priv)) {
-               sr_err("Driver was not initialized.");
-               return SR_ERR;
-       }
-
-       usb = sdi->conn;
-       devc = sdi->priv;
-
-       if (sr_usb_open(drvc->sr_ctx->libusb_ctx, usb) != SR_OK)
-               return SR_ERR;
-
-       /*
-        * Determine if a kernel driver is active on this interface and, if so,
-        * detach it.
-        */
-       if (libusb_kernel_driver_active(usb->devhdl, USB_INTERFACE) == 1) {
-               ret = libusb_detach_kernel_driver(usb->devhdl, USB_INTERFACE);
-               if (ret < 0) {
-                       sr_err("Failed to detach kernel driver: %s.",
-                               libusb_error_name(ret));
-                       return SR_ERR;
-               }
-       }
-
-       if ((ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE)) < 0) {
-               sr_err("Failed to claim interface: %s.",
-                       libusb_error_name(ret));
-               return SR_ERR;
-       }
-
-       libusb_fill_control_transfer(devc->xfer_in, usb->devhdl,
-               devc->xfer_buf_in, sl2_receive_transfer_in,
-               sdi, USB_TIMEOUT);
-
-       libusb_fill_control_transfer(devc->xfer_out, usb->devhdl,
-               devc->xfer_buf_out, sl2_receive_transfer_out,
-               sdi, USB_TIMEOUT);
-
-       memset(buffer, 0, sizeof(buffer));
-
-       buffer[0] = CMD_RESET;
-       if ((ret = sl2_transfer_out(usb->devhdl, buffer)) != PACKET_LENGTH) {
-               sr_err("Device reset failed: %s.", libusb_error_name(ret));
-               return SR_ERR;
-       }
-
-       /*
-        * Set the device to idle state. If the device is not in idle state it
-        * possibly will reset itself after a few seconds without being used
-        * and thereby close the connection.
-        */
-       buffer[0] = CMD_IDLE;
-       if ((ret = sl2_transfer_out(usb->devhdl, buffer)) != PACKET_LENGTH) {
-               sr_err("Failed to set device in idle state: %s.",
-                       libusb_error_name(ret));
-               return SR_ERR;
-       }
-
-       sdi->status = SR_ST_ACTIVE;
-
-       return SR_OK;
-}
-
-static int dev_close(struct sr_dev_inst *sdi)
-{
-       struct sr_usb_dev_inst *usb;
-
-       if (!di->priv) {
-               sr_err("Driver was not initialized.");
-               return SR_ERR;
-       }
-
-       usb = sdi->conn;
-
-       if (!usb->devhdl)
-               return SR_OK;
-
-       libusb_release_interface(usb->devhdl, USB_INTERFACE);
-       libusb_close(usb->devhdl);
-
-       usb->devhdl = NULL;
-       sdi->status = SR_ST_INACTIVE;
-
-       return SR_OK;
-}
-
-static int cleanup(void)
-{
-       return dev_clear();
-}
-
-static int config_get(int key, GVariant **data, const struct sr_dev_inst *sdi,
-               const struct sr_channel_group *cg)
-{
-       struct dev_context *devc;
-       int ret;
-
-       (void)cg;
-
-       ret = SR_OK;
-       devc = sdi->priv;
-
-       switch (key) {
-       case SR_CONF_SAMPLERATE:
-               *data = g_variant_new_uint64(devc->samplerate);
-               break;
-       case SR_CONF_CAPTURE_RATIO:
-               *data = g_variant_new_uint64(devc->capture_ratio);
-               break;
-       default:
-               return SR_ERR_NA;
-       }
-
-       return ret;
-}
-
-static int config_set(int key, GVariant *data, const struct sr_dev_inst *sdi,
-               const struct sr_channel_group *cg)
-{
-       uint64_t samplerate, limit_samples, capture_ratio;
-       int ret;
-
-       (void)cg;
-
-       if (sdi->status != SR_ST_ACTIVE)
-               return SR_ERR_DEV_CLOSED;
-
-       ret = SR_OK;
-
-       switch (key) {
-       case SR_CONF_LIMIT_SAMPLES:
-               limit_samples = g_variant_get_uint64(data);
-               ret = sl2_set_limit_samples(sdi, limit_samples);
-               break;
-       case SR_CONF_SAMPLERATE:
-               samplerate = g_variant_get_uint64(data);
-               ret = sl2_set_samplerate(sdi, samplerate);
-               break;
-       case SR_CONF_CAPTURE_RATIO:
-               capture_ratio = g_variant_get_uint64(data);
-               ret = sl2_set_capture_ratio(sdi, capture_ratio);
-               break;
-       default:
-               return SR_ERR_NA;
-       }
-
-       return ret;
-}
-
-static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi,
-               const struct sr_channel_group *cg)
-{
-       GVariant *gvar, *grange[2];
-       GVariantBuilder gvb;
-       int ret;
-
-       (void)sdi;
-       (void)cg;
-
-       ret = SR_OK;
-
-       switch (key) {
-       case SR_CONF_DEVICE_OPTIONS:
-               *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, hwcaps,
-                       ARRAY_SIZE(hwcaps), sizeof(int32_t));
-               break;
-       case SR_CONF_SAMPLERATE:
-               g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
-               gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"),
-                       sl2_samplerates, ARRAY_SIZE(sl2_samplerates),
-                       sizeof(uint64_t));
-               g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
-               *data = g_variant_builder_end(&gvb);
-               break;
-       case SR_CONF_TRIGGER_MATCH:
-               *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
-                               trigger_matches, ARRAY_SIZE(trigger_matches),
-                               sizeof(int32_t));
-               break;
-       case SR_CONF_LIMIT_SAMPLES:
-               grange[0] = g_variant_new_uint64(0);
-               grange[1] = g_variant_new_uint64(MAX_SAMPLES);
-               *data = g_variant_new_tuple(grange, 2);
-               break;
-       default:
-               return SR_ERR_NA;
-       }
-
-       return ret;
-}
-
-static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
-{
-       struct drv_context *drvc;
-       struct dev_context *devc;
-       uint16_t trigger_bytes, tmp;
-       unsigned int i, j;
-       int ret;
-
-       if (sdi->status != SR_ST_ACTIVE)
-               return SR_ERR_DEV_CLOSED;
-
-       devc = sdi->priv;
-       drvc = di->priv;
-
-       devc->cb_data = cb_data;
-       devc->wait_data_ready_locked = TRUE;
-       devc->stopping_in_progress = FALSE;
-       devc->transfer_error = FALSE;
-       devc->samples_processed = 0;
-       devc->channel = 0;
-       devc->sample_packet = 0;
-
-       /*
-        * The trigger must be configured first because the calculation of the
-        * pre and post trigger samples depends on a configured trigger.
-        */
-       sl2_convert_trigger(sdi);
-       sl2_calculate_trigger_samples(sdi);
-
-       trigger_bytes = devc->pre_trigger_bytes + devc->post_trigger_bytes;
-
-       /* Calculate the number of expected sample packets. */
-       devc->num_sample_packets = trigger_bytes / PACKET_NUM_SAMPLE_BYTES;
-
-       /* Round up the number of expected sample packets. */
-       if (trigger_bytes % PACKET_NUM_SAMPLE_BYTES != 0)
-               devc->num_sample_packets++;
-
-       devc->num_enabled_channels = 0;
-
-       /*
-        * Count the number of enabled channels and number them for a sequential
-        * access.
-        */
-       for (i = 0, j = 0; i < NUM_CHANNELS; i++) {
-               if (devc->channels[i]->enabled) {
-                       devc->num_enabled_channels++;
-                       devc->channel_map[j] = i;
-                       j++;
-               }
-       }
-
-       sr_dbg("Number of enabled channels: %i.", devc->num_enabled_channels);
-
-       /* Set up the transfer buffer for the acquisition. */
-       devc->xfer_data_out[0] = CMD_SAMPLE;
-       devc->xfer_data_out[1] = 0x00;
-
-       tmp = GUINT16_TO_LE(devc->pre_trigger_bytes);
-       memcpy(devc->xfer_data_out + 2, &tmp, sizeof(tmp));
-
-       tmp = GUINT16_TO_LE(devc->post_trigger_bytes);
-       memcpy(devc->xfer_data_out + 4, &tmp, sizeof(tmp));
-
-       devc->xfer_data_out[6] = devc->samplerate_id;
-       devc->xfer_data_out[7] = devc->trigger_type;
-       devc->xfer_data_out[8] = devc->trigger_channel;
-       devc->xfer_data_out[9] = 0x00;
-
-       tmp = GUINT16_TO_LE(devc->after_trigger_delay);
-       memcpy(devc->xfer_data_out + 10, &tmp, sizeof(tmp));
-
-       if ((ret = libusb_submit_transfer(devc->xfer_out)) != 0) {
-               sr_err("Submit transfer failed: %s.", libusb_error_name(ret));
-               return SR_ERR;
-       }
-
-       usb_source_add(sdi->session, drvc->sr_ctx, 100,
-                       ikalogic_scanalogic2_receive_data, (void *)sdi);
-
-       sr_dbg("Acquisition started successfully.");
-
-       /* Send header packet to the session bus. */
-       std_session_send_df_header(cb_data, LOG_PREFIX);
-
-       devc->next_state = STATE_SAMPLE;
-
-       return SR_OK;
-}
-
-static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
-{
-       (void)cb_data;
-
-       if (sdi->status != SR_ST_ACTIVE)
-               return SR_ERR_DEV_CLOSED;
-
-       sr_dbg("Stopping acquisition.");
-
-       sdi->status = SR_ST_STOPPING;
-
-       return SR_OK;
-}
-
-SR_PRIV struct sr_dev_driver ikalogic_scanalogic2_driver_info = {
-       .name = "ikalogic-scanalogic2",
-       .longname = "IKALOGIC Scanalogic-2",
-       .api_version = 1,
-       .init = init,
-       .cleanup = cleanup,
-       .scan = scan,
-       .dev_list = dev_list,
-       .dev_clear = dev_clear,
-       .config_get = config_get,
-       .config_set = config_set,
-       .config_list = config_list,
-       .dev_open = dev_open,
-       .dev_close = dev_close,
-       .dev_acquisition_start = dev_acquisition_start,
-       .dev_acquisition_stop = dev_acquisition_stop,
-       .priv = NULL,
-};