Reorganize project tree.

[libsigrok.git] / hardware / fx2lafw / protocol.h

diff --git a/hardware/fx2lafw/protocol.h b/hardware/fx2lafw/protocol.h
deleted file mode 100644 (file)
index fef0dd7..0000000
--- a/hardware/fx2lafw/protocol.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * This file is part of the libsigrok project.
- *
- * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
- * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef LIBSIGROK_HARDWARE_FX2LAFW_PROTOCOL_H
-#define LIBSIGROK_HARDWARE_FX2LAFW_PROTOCOL_H
-
-#include <glib.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <string.h>
-#include <libusb.h>
-#include "libsigrok.h"
-#include "libsigrok-internal.h"
-
-#define LOG_PREFIX "fx2lafw"
-
-#define USB_INTERFACE          0
-#define USB_CONFIGURATION      1
-#define NUM_TRIGGER_STAGES     4
-
-#define MAX_RENUM_DELAY_MS     3000
-#define NUM_SIMUL_TRANSFERS    32
-#define MAX_EMPTY_TRANSFERS    (NUM_SIMUL_TRANSFERS * 2)
-
-#define FX2LAFW_REQUIRED_VERSION_MAJOR 1
-
-#define MAX_8BIT_SAMPLE_RATE   SR_MHZ(24)
-#define MAX_16BIT_SAMPLE_RATE  SR_MHZ(12)
-
-/* 6 delay states of up to 256 clock ticks */
-#define MAX_SAMPLE_DELAY       (6 * 256)
-
-#define DEV_CAPS_16BIT_POS     0
-
-#define DEV_CAPS_16BIT         (1 << DEV_CAPS_16BIT_POS)
-
-struct fx2lafw_profile {
-       uint16_t vid;
-       uint16_t pid;
-
-       const char *vendor;
-       const char *model;
-       const char *model_version;
-
-       const char *firmware;
-
-       uint32_t dev_caps;
-
-       const char *usb_manufacturer;
-       const char *usb_product;
-};
-
-struct dev_context {
-       const struct fx2lafw_profile *profile;
-       /*
-        * Since we can't keep track of an fx2lafw device after upgrading
-        * the firmware (it renumerates into a different device address
-        * after the upgrade) this is like a global lock. No device will open
-        * until a proper delay after the last device was upgraded.
-        */
-       int64_t fw_updated;
-
-       /* Device/capture settings */
-       uint64_t cur_samplerate;
-       uint64_t limit_samples;
-
-       /* Operational settings */
-       gboolean trigger_fired;
-       gboolean acq_aborted;
-       gboolean sample_wide;
-       struct soft_trigger_logic *stl;
-
-       unsigned int sent_samples;
-       int submitted_transfers;
-       int empty_transfer_count;
-
-       void *cb_data;
-       unsigned int num_transfers;
-       struct libusb_transfer **transfers;
-       struct sr_context *ctx;
-};
-
-SR_PRIV int fx2lafw_command_start_acquisition(const struct sr_dev_inst *sdi);
-SR_PRIV gboolean fx2lafw_check_conf_profile(libusb_device *dev);
-SR_PRIV int fx2lafw_dev_open(struct sr_dev_inst *sdi, struct sr_dev_driver *di);
-SR_PRIV struct dev_context *fx2lafw_dev_new(void);
-SR_PRIV void fx2lafw_abort_acquisition(struct dev_context *devc);
-SR_PRIV void fx2lafw_receive_transfer(struct libusb_transfer *transfer);
-SR_PRIV size_t fx2lafw_get_buffer_size(struct dev_context *devc);
-SR_PRIV unsigned int fx2lafw_get_number_of_transfers(struct dev_context *devc);
-SR_PRIV unsigned int fx2lafw_get_timeout(struct dev_context *devc);
-
-#endif