/*
- * This file is part of the sigrok project.
+ * This file is part of the libsigrok project.
*
- * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
+ * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
* Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
*
* This program is free software: you can redistribute it and/or modify
{ 0, 0, 0, 0, 0, 0, 0 }
};
-static const int hwcaps[] = {
+static const int32_t hwopts[] = {
+ SR_CONF_CONN,
+};
+
+static const int32_t hwcaps[] = {
SR_CONF_LOGIC_ANALYZER,
+ SR_CONF_TRIGGER_TYPE,
SR_CONF_SAMPLERATE,
/* These are really implemented in the driver, not the hardware. */
SR_CONF_LIMIT_SAMPLES,
SR_CONF_CONTINUOUS,
- 0,
};
static const char *probe_names[] = {
NULL,
};
-static const uint64_t supported_samplerates[] = {
+static const uint64_t samplerates[] = {
SR_KHZ(20),
SR_KHZ(25),
SR_KHZ(50),
SR_MHZ(12),
SR_MHZ(16),
SR_MHZ(24),
- 0,
-};
-
-static const struct sr_samplerates samplerates = {
- 0,
- 0,
- 0,
- supported_samplerates,
};
SR_PRIV struct sr_dev_driver fx2lafw_driver_info;
static struct sr_dev_driver *di = &fx2lafw_driver_info;
static int hw_dev_close(struct sr_dev_inst *sdi);
-static int config_set(int id, const void *value, const struct sr_dev_inst *sdi);
static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data);
/**
static int fx2lafw_dev_open(struct sr_dev_inst *sdi)
{
libusb_device **devlist;
+ struct sr_usb_dev_inst *usb;
struct libusb_device_descriptor des;
struct dev_context *devc;
struct drv_context *drvc;
drvc = di->priv;
devc = sdi->priv;
+ usb = sdi->conn;
if (sdi->status == SR_ST_ACTIVE)
/* Device is already in use. */
* This device is fully enumerated, so we need to find
* this device by vendor, product, bus and address.
*/
- if (libusb_get_bus_number(devlist[i]) != devc->usb->bus
- || libusb_get_device_address(devlist[i]) != devc->usb->address)
+ if (libusb_get_bus_number(devlist[i]) != usb->bus
+ || libusb_get_device_address(devlist[i]) != usb->address)
/* This is not the one. */
continue;
}
- if (!(ret = libusb_open(devlist[i], &devc->usb->devhdl))) {
- if (devc->usb->address == 0xff)
+ if (!(ret = libusb_open(devlist[i], &usb->devhdl))) {
+ if (usb->address == 0xff)
/*
* First time we touch this device after FW
* upload, so we don't know the address yet.
*/
- devc->usb->address = libusb_get_device_address(devlist[i]);
+ usb->address = libusb_get_device_address(devlist[i]);
} else {
sr_err("Failed to open device: %s.",
libusb_error_name(ret));
break;
}
- ret = command_get_fw_version(devc->usb->devhdl, &vi);
+ ret = command_get_fw_version(usb->devhdl, &vi);
if (ret != SR_OK) {
sr_err("Failed to get firmware version.");
break;
}
- ret = command_get_revid_version(devc->usb->devhdl, &revid);
+ ret = command_get_revid_version(usb->devhdl, &revid);
if (ret != SR_OK) {
sr_err("Failed to get REVID.");
break;
sdi->status = SR_ST_ACTIVE;
sr_info("Opened device %d on %d.%d, "
"interface %d, firmware %d.%d.",
- sdi->index, devc->usb->bus, devc->usb->address,
+ sdi->index, usb->bus, usb->address,
USB_INTERFACE, vi.major, vi.minor);
sr_info("Detected REVID=%d, it's a Cypress CY7C68013%s.",
static int clear_instances(void)
{
- GSList *l;
- struct sr_dev_inst *sdi;
- struct drv_context *drvc;
- struct dev_context *devc;
- int ret;
-
- drvc = di->priv;
- ret = SR_OK;
- for (l = drvc->instances; l; l = l->next) {
- if (!(sdi = l->data)) {
- /* Log error, but continue cleaning up the rest. */
- sr_err("sdi was NULL, continuing.");
- ret = SR_ERR_BUG;
- continue;
- }
- if (!(devc = sdi->priv)) {
- /* Log error, but continue cleaning up the rest. */
- sr_err("sdi->priv was NULL, continuing.");
- ret = SR_ERR_BUG;
- continue;
- }
- hw_dev_close(sdi);
- sr_usb_dev_inst_free(devc->usb);
- sdi = l->data;
- sr_dev_inst_free(sdi);
- }
-
- g_slist_free(drvc->instances);
- drvc->instances = NULL;
-
- return ret;
+ return std_dev_clear(di, NULL);
}
static int hw_init(struct sr_context *sr_ctx)
{
- struct drv_context *drvc;
-
- if (!(drvc = g_try_malloc0(sizeof(struct drv_context)))) {
- sr_err("Driver context malloc failed.");
- return SR_ERR_MALLOC;
- }
-
- drvc->sr_ctx = sr_ctx;
- di->priv = drvc;
-
- return SR_OK;
+ return std_hw_init(sr_ctx, di, DRIVER_LOG_DOMAIN);
}
static GSList *hw_scan(GSList *options)
{
- GSList *devices;
- struct libusb_device_descriptor des;
- struct sr_dev_inst *sdi;
- const struct fx2lafw_profile *prof;
struct drv_context *drvc;
struct dev_context *devc;
+ struct sr_dev_inst *sdi;
+ struct sr_usb_dev_inst *usb;
struct sr_probe *probe;
+ struct sr_config *src;
+ const struct fx2lafw_profile *prof;
+ GSList *l, *devices, *conn_devices;
+ struct libusb_device_descriptor des;
libusb_device **devlist;
int devcnt, num_logic_probes, ret, i, j;
+ const char *conn;
(void)options;
/* This scan always invalidates any previous scans. */
clear_instances();
+ conn = NULL;
+ for (l = options; l; l = l->next) {
+ src = l->data;
+ switch (src->key) {
+ case SR_CONF_CONN:
+ conn = g_variant_get_string(src->data, NULL);
+ break;
+ }
+ }
+ if (conn)
+ conn_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, conn);
+ else
+ conn_devices = NULL;
+
/* Find all fx2lafw compatible devices and upload firmware to them. */
devices = NULL;
libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
for (i = 0; devlist[i]; i++) {
+ if (conn) {
+ usb = NULL;
+ for (l = conn_devices; l; l = l->next) {
+ usb = l->data;
+ if (usb->bus == libusb_get_bus_number(devlist[i])
+ && usb->address == libusb_get_device_address(devlist[i]))
+ break;
+ }
+ if (!l)
+ /* This device matched none of the ones that
+ * matched the conn specification. */
+ continue;
+ }
- if ((ret = libusb_get_device_descriptor(
- devlist[i], &des)) != 0) {
+ if ((ret = libusb_get_device_descriptor( devlist[i], &des)) != 0) {
sr_warn("Failed to get device descriptor: %s.",
libusb_error_name(ret));
continue;
/* Already has the firmware, so fix the new address. */
sr_dbg("Found an fx2lafw device.");
sdi->status = SR_ST_INACTIVE;
- devc->usb = sr_usb_dev_inst_new
- (libusb_get_bus_number(devlist[i]),
- libusb_get_device_address(devlist[i]), NULL);
+ sdi->inst_type = SR_INST_USB;
+ sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]),
+ libusb_get_device_address(devlist[i]), NULL);
} else {
if (ezusb_upload_firmware(devlist[i], USB_CONFIGURATION,
prof->firmware) == SR_OK)
else
sr_err("Firmware upload failed for "
"device %d.", devcnt);
- devc->usb = sr_usb_dev_inst_new
- (libusb_get_bus_number(devlist[i]), 0xff, NULL);
+ sdi->inst_type = SR_INST_USB;
+ sdi->conn = sr_usb_dev_inst_new (libusb_get_bus_number(devlist[i]),
+ 0xff, NULL);
}
}
libusb_free_device_list(devlist, 1);
static GSList *hw_dev_list(void)
{
- struct drv_context *drvc;
-
- drvc = di->priv;
-
- return drvc->instances;
+ return ((struct drv_context *)(di->priv))->instances;
}
static int hw_dev_open(struct sr_dev_inst *sdi)
{
+ struct sr_usb_dev_inst *usb;
struct dev_context *devc;
int ret;
int64_t timediff_us, timediff_ms;
devc = sdi->priv;
+ usb = sdi->conn;
/*
* If the firmware was recently uploaded, wait up to MAX_RENUM_DELAY_MS
return SR_ERR;
}
- devc = sdi->priv;
-
- ret = libusb_claim_interface(devc->usb->devhdl, USB_INTERFACE);
+ ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE);
if (ret != 0) {
switch(ret) {
case LIBUSB_ERROR_BUSY:
if (devc->cur_samplerate == 0) {
/* Samplerate hasn't been set; default to the slowest one. */
- if (config_set(SR_CONF_SAMPLERATE, &supported_samplerates[0],
- sdi) == SR_ERR)
- return SR_ERR;
+ devc->cur_samplerate = samplerates[0];
}
return SR_OK;
static int hw_dev_close(struct sr_dev_inst *sdi)
{
- struct dev_context *devc;
+ struct sr_usb_dev_inst *usb;
- devc = sdi->priv;
- if (devc->usb->devhdl == NULL)
+ usb = sdi->conn;
+ if (usb->devhdl == NULL)
return SR_ERR;
- sr_info("Closing device %d on %d.%d, interface %d.",
- sdi->index, devc->usb->bus, devc->usb->address, USB_INTERFACE);
- libusb_release_interface(devc->usb->devhdl, USB_INTERFACE);
- libusb_close(devc->usb->devhdl);
- devc->usb->devhdl = NULL;
+ sr_info("fx2lafw: Closing device %d on %d.%d interface %d.",
+ sdi->index, usb->bus, usb->address, USB_INTERFACE);
+ libusb_release_interface(usb->devhdl, USB_INTERFACE);
+ libusb_close(usb->devhdl);
+ usb->devhdl = NULL;
sdi->status = SR_ST_INACTIVE;
return SR_OK;
return ret;
}
-static int config_get(int id, const void **data, const struct sr_dev_inst *sdi)
+static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
+ struct sr_usb_dev_inst *usb;
+ char str[128];
switch (id) {
- case SR_DI_HWCAPS:
- *data = hwcaps;
- break;
- case SR_DI_SAMPLERATES:
- *data = &samplerates;
- break;
- case SR_DI_TRIGGER_TYPES:
- *data = TRIGGER_TYPES;
+ case SR_CONF_CONN:
+ if (!sdi || !sdi->conn)
+ return SR_ERR_ARG;
+ usb = sdi->conn;
+ if (usb->address == 255)
+ /* Device still needs to re-enumerate after firmware
+ * upload, so we don't know its (future) address. */
+ return SR_ERR;
+ snprintf(str, 128, "%d.%d", usb->bus, usb->address);
+ *data = g_variant_new_string(str);
break;
- case SR_DI_CUR_SAMPLERATE:
- if (sdi) {
- devc = sdi->priv;
- *data = &devc->cur_samplerate;
- } else
+ case SR_CONF_SAMPLERATE:
+ if (!sdi)
return SR_ERR;
+ devc = sdi->priv;
+ *data = g_variant_new_uint64(devc->cur_samplerate);
break;
default:
- return SR_ERR_ARG;
+ return SR_ERR_NA;
}
return SR_OK;
}
-static int config_set(int id, const void *value, const struct sr_dev_inst *sdi)
+static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
int ret;
devc = sdi->priv;
if (id == SR_CONF_SAMPLERATE) {
- devc->cur_samplerate = *(const uint64_t *)value;
+ devc->cur_samplerate = g_variant_get_uint64(data);
ret = SR_OK;
} else if (id == SR_CONF_LIMIT_SAMPLES) {
- devc->limit_samples = *(const uint64_t *)value;
+ devc->limit_samples = g_variant_get_uint64(data);
ret = SR_OK;
} else {
- ret = SR_ERR;
+ ret = SR_ERR_NA;
}
return ret;
}
+static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi)
+{
+ GVariant *gvar;
+ GVariantBuilder gvb;
+
+ (void)sdi;
+
+ switch (key) {
+ case SR_CONF_SCAN_OPTIONS:
+ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
+ hwopts, ARRAY_SIZE(hwopts), sizeof(int32_t));
+ break;
+ case SR_CONF_DEVICE_OPTIONS:
+ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
+ hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t));
+ break;
+ case SR_CONF_SAMPLERATE:
+ g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
+ gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
+ ARRAY_SIZE(samplerates), sizeof(uint64_t));
+ g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
+ *data = g_variant_builder_end(&gvb);
+ break;
+ case SR_CONF_TRIGGER_TYPE:
+ *data = g_variant_new_string(TRIGGER_TYPE);
+ break;
+ default:
+ return SR_ERR_NA;
+ }
+
+ return SR_OK;
+}
+
static int receive_data(int fd, int revents, void *cb_data)
{
struct timeval tv;
/* Terminate session. */
packet.type = SR_DF_END;
- sr_session_send(devc->session_dev_id, &packet);
+ sr_session_send(devc->cb_data, &packet);
/* Remove fds from polling. */
lupfd = libusb_get_pollfds(drvc->sr_ctx->libusb_ctx);
*/
packet.type = SR_DF_TRIGGER;
packet.payload = NULL;
- sr_session_send(devc->session_dev_id, &packet);
+ sr_session_send(devc->cb_data, &packet);
/*
* Send the samples that triggered it,
logic.unitsize = sizeof(*devc->trigger_buffer);
logic.length = devc->trigger_stage * logic.unitsize;
logic.data = devc->trigger_buffer;
- sr_session_send(devc->session_dev_id, &packet);
+ sr_session_send(devc->cb_data, &packet);
devc->trigger_stage = TRIGGER_FIRED;
break;
logic.length = transfer->actual_length - trigger_offset_bytes;
logic.unitsize = sample_width;
logic.data = cur_buf + trigger_offset_bytes;
- sr_session_send(devc->session_dev_id, &packet);
+ sr_session_send(devc->cb_data, &packet);
devc->num_samples += cur_sample_count;
if (devc->limit_samples &&
static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
void *cb_data)
{
- struct sr_datafeed_packet packet;
- struct sr_datafeed_header header;
struct dev_context *devc;
struct drv_context *drvc;
+ struct sr_usb_dev_inst *usb;
struct libusb_transfer *transfer;
const struct libusb_pollfd **lupfd;
unsigned int i, timeout, num_transfers;
drvc = di->priv;
devc = sdi->priv;
+ usb = sdi->conn;
if (devc->submitted_transfers != 0)
return SR_ERR;
return SR_ERR;
}
- devc->session_dev_id = cb_data;
+ devc->cb_data = cb_data;
devc->num_samples = 0;
devc->empty_transfer_count = 0;
return SR_ERR_MALLOC;
}
transfer = libusb_alloc_transfer(0);
- libusb_fill_bulk_transfer(transfer, devc->usb->devhdl,
+ libusb_fill_bulk_transfer(transfer, usb->devhdl,
2 | LIBUSB_ENDPOINT_IN, buf, size,
receive_transfer, devc, timeout);
if ((ret = libusb_submit_transfer(transfer)) != 0) {
timeout, receive_data, NULL);
free(lupfd); /* NOT g_free()! */
- packet.type = SR_DF_HEADER;
- packet.payload = &header;
- header.feed_version = 1;
- gettimeofday(&header.starttime, NULL);
- sr_session_send(cb_data, &packet);
+ /* Send header packet to the session bus. */
+ std_session_send_df_header(cb_data, DRIVER_LOG_DOMAIN);
- if ((ret = command_start_acquisition(devc->usb->devhdl,
+ if ((ret = command_start_acquisition (usb->devhdl,
devc->cur_samplerate, devc->sample_wide)) != SR_OK) {
abort_acquisition(devc);
return ret;
.dev_clear = clear_instances,
.config_get = config_get,
.config_set = config_set,
+ .config_list = config_list,
.dev_open = hw_dev_open,
.dev_close = hw_dev_close,
.dev_acquisition_start = hw_dev_acquisition_start,
projects / libsigrok.git / blobdiff