* This file is part of the libserialport project.
*
* Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
- * Copyright (C) 2010-2012 Uwe Hermann <uwe@hermann-uwe.de>
- * Copyright (C) 2013 Martin Ling <martin-libserialport@earth.li>
+ * Copyright (C) 2010-2015 Uwe Hermann <uwe@hermann-uwe.de>
+ * Copyright (C) 2013-2015 Martin Ling <martin-libserialport@earth.li>
* Copyright (C) 2013 Matthias Heidbrink <m-sigrok@heidbrink.biz>
* Copyright (C) 2014 Aurelien Jacobs <aurel@gnuage.org>
*
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <config.h>
#include "libserialport.h"
#include "libserialport_internal.h"
size_t bytes_written = 0;
unsigned char *ptr = (unsigned char *) buf;
struct timeval start, delta, now, end = {0, 0};
+ int started = 0;
fd_set fds;
int result;
timeradd(&start, &delta, &end);
}
+ FD_ZERO(&fds);
+ FD_SET(port->fd, &fds);
+
/* Loop until we have written the requested number of bytes. */
while (bytes_written < count) {
- /* Wait until space is available. */
- FD_ZERO(&fds);
- FD_SET(port->fd, &fds);
- if (timeout_ms) {
+ /*
+ * Check timeout only if we have run select() at least once,
+ * to avoid any issues if a short timeout is reached before
+ * select() is even run.
+ */
+ if (timeout_ms && started) {
gettimeofday(&now, NULL);
- if (timercmp(&now, &end, >)) {
- DEBUG("Write timed out");
- RETURN_INT(bytes_written);
- }
+ if (timercmp(&now, &end, >))
+ /* Timeout has expired. */
+ break;
timersub(&end, &now, &delta);
}
result = select(port->fd + 1, NULL, &fds, NULL, timeout_ms ? &delta : NULL);
+ started = 1;
if (result < 0) {
if (errno == EINTR) {
DEBUG("select() call was interrupted, repeating");
RETURN_FAIL("select() failed");
}
} else if (result == 0) {
- DEBUG("Write timed out");
- RETURN_INT(bytes_written);
+ /* Timeout has expired. */
+ break;
}
/* Do write. */
ptr += result;
}
+ if (bytes_written < count)
+ DEBUG("Write timed out");
+
RETURN_INT(bytes_written);
#endif
}
/* Set timeout. */
if (port->timeouts.ReadIntervalTimeout != 0 ||
+ port->timeouts.ReadTotalTimeoutMultiplier != 0 ||
port->timeouts.ReadTotalTimeoutConstant != timeout_ms) {
port->timeouts.ReadIntervalTimeout = 0;
+ port->timeouts.ReadTotalTimeoutMultiplier = 0;
port->timeouts.ReadTotalTimeoutConstant = timeout_ms;
if (SetCommTimeouts(port->hdl, &port->timeouts) == 0)
RETURN_FAIL("SetCommTimeouts() failed");
size_t bytes_read = 0;
unsigned char *ptr = (unsigned char *) buf;
struct timeval start, delta, now, end = {0, 0};
+ int started = 0;
fd_set fds;
int result;
timeradd(&start, &delta, &end);
}
+ FD_ZERO(&fds);
+ FD_SET(port->fd, &fds);
+
/* Loop until we have the requested number of bytes. */
while (bytes_read < count) {
- /* Wait until data is available. */
- FD_ZERO(&fds);
- FD_SET(port->fd, &fds);
- if (timeout_ms) {
+ /*
+ * Check timeout only if we have run select() at least once,
+ * to avoid any issues if a short timeout is reached before
+ * select() is even run.
+ */
+ if (timeout_ms && started) {
gettimeofday(&now, NULL);
if (timercmp(&now, &end, >))
/* Timeout has expired. */
- RETURN_INT(bytes_read);
+ break;
timersub(&end, &now, &delta);
}
result = select(port->fd + 1, &fds, NULL, NULL, timeout_ms ? &delta : NULL);
+ started = 1;
if (result < 0) {
if (errno == EINTR) {
DEBUG("select() call was interrupted, repeating");
RETURN_FAIL("select() failed");
}
} else if (result == 0) {
- DEBUG("Read timed out");
- RETURN_INT(bytes_read);
+ /* Timeout has expired. */
+ break;
}
/* Do read. */
if (result < 0) {
if (errno == EAGAIN)
- /* This shouldn't happen because we did a select() first, but handle anyway. */
+ /*
+ * This shouldn't happen because we did a
+ * select() first, but handle anyway.
+ */
continue;
else
/* This is an actual failure. */
ptr += result;
}
+ if (bytes_read < count)
+ DEBUG("Read timed out");
+
+ RETURN_INT(bytes_read);
+#endif
+}
+
+SP_API enum sp_return sp_blocking_read_next(struct sp_port *port, void *buf,
+ size_t count, unsigned int timeout_ms)
+{
+ TRACE("%p, %p, %d, %d", port, buf, count, timeout_ms);
+
+ CHECK_OPEN_PORT();
+
+ if (!buf)
+ RETURN_ERROR(SP_ERR_ARG, "Null buffer");
+
+ if (count == 0)
+ RETURN_ERROR(SP_ERR_ARG, "Zero count");
+
+ if (timeout_ms)
+ DEBUG_FMT("Reading next max %d bytes from port %s, timeout %d ms",
+ count, port->name, timeout_ms);
+ else
+ DEBUG_FMT("Reading next max %d bytes from port %s, no timeout",
+ count, port->name);
+
+#ifdef _WIN32
+ DWORD bytes_read = 0;
+
+ /* If timeout_ms == 0, set maximum timeout. */
+ DWORD timeout_val = (timeout_ms == 0 ? MAXDWORD - 1 : timeout_ms);
+
+ /* Set timeout. */
+ if (port->timeouts.ReadIntervalTimeout != MAXDWORD ||
+ port->timeouts.ReadTotalTimeoutMultiplier != MAXDWORD ||
+ port->timeouts.ReadTotalTimeoutConstant != timeout_val) {
+ port->timeouts.ReadIntervalTimeout = MAXDWORD;
+ port->timeouts.ReadTotalTimeoutMultiplier = MAXDWORD;
+ port->timeouts.ReadTotalTimeoutConstant = timeout_val;
+ if (SetCommTimeouts(port->hdl, &port->timeouts) == 0)
+ RETURN_FAIL("SetCommTimeouts() failed");
+ }
+
+ /* Loop until we have at least one byte, or timeout is reached. */
+ while (bytes_read == 0) {
+ /* Start read. */
+ if (ReadFile(port->hdl, buf, count, NULL, &port->read_ovl)) {
+ DEBUG("Read completed immediately");
+ bytes_read = count;
+ } else if (GetLastError() == ERROR_IO_PENDING) {
+ DEBUG("Waiting for read to complete");
+ if (GetOverlappedResult(port->hdl, &port->read_ovl, &bytes_read, TRUE) == 0)
+ RETURN_FAIL("GetOverlappedResult() failed");
+ if (bytes_read > 0) {
+ DEBUG("Read completed");
+ } else if (timeout_ms > 0) {
+ DEBUG("Read timed out");
+ break;
+ } else {
+ DEBUG("Restarting read");
+ }
+ } else {
+ RETURN_FAIL("ReadFile() failed");
+ }
+ }
+
+ TRY(restart_wait_if_needed(port, bytes_read));
+
+ RETURN_INT(bytes_read);
+
+#else
+ size_t bytes_read = 0;
+ struct timeval start, delta, now, end = {0, 0};
+ int started = 0;
+ fd_set fds;
+ int result;
+
+ if (timeout_ms) {
+ /* Get time at start of operation. */
+ gettimeofday(&start, NULL);
+ /* Define duration of timeout. */
+ delta.tv_sec = timeout_ms / 1000;
+ delta.tv_usec = (timeout_ms % 1000) * 1000;
+ /* Calculate time at which we should give up. */
+ timeradd(&start, &delta, &end);
+ }
+
+ FD_ZERO(&fds);
+ FD_SET(port->fd, &fds);
+
+ /* Loop until we have at least one byte, or timeout is reached. */
+ while (bytes_read == 0) {
+ /*
+ * Check timeout only if we have run select() at least once,
+ * to avoid any issues if a short timeout is reached before
+ * select() is even run.
+ */
+ if (timeout_ms && started) {
+ gettimeofday(&now, NULL);
+ if (timercmp(&now, &end, >))
+ /* Timeout has expired. */
+ break;
+ timersub(&end, &now, &delta);
+ }
+ result = select(port->fd + 1, &fds, NULL, NULL, timeout_ms ? &delta : NULL);
+ started = 1;
+ if (result < 0) {
+ if (errno == EINTR) {
+ DEBUG("select() call was interrupted, repeating");
+ continue;
+ } else {
+ RETURN_FAIL("select() failed");
+ }
+ } else if (result == 0) {
+ /* Timeout has expired. */
+ break;
+ }
+
+ /* Do read. */
+ result = read(port->fd, buf, count);
+
+ if (result < 0) {
+ if (errno == EAGAIN)
+ /* This shouldn't happen because we did a select() first, but handle anyway. */
+ continue;
+ else
+ /* This is an actual failure. */
+ RETURN_FAIL("read() failed");
+ }
+
+ bytes_read = result;
+ }
+
+ if (bytes_read == 0)
+ DEBUG("Read timed out");
+
RETURN_INT(bytes_read);
#endif
}
/* Set timeout. */
if (port->timeouts.ReadIntervalTimeout != MAXDWORD ||
+ port->timeouts.ReadTotalTimeoutMultiplier != 0 ||
port->timeouts.ReadTotalTimeoutConstant != 0) {
port->timeouts.ReadIntervalTimeout = MAXDWORD;
+ port->timeouts.ReadTotalTimeoutMultiplier = 0;
port->timeouts.ReadTotalTimeoutConstant = 0;
if (SetCommTimeouts(port->hdl, &port->timeouts) == 0)
RETURN_FAIL("SetCommTimeouts() failed");
RETURN_OK();
#else
struct timeval start, delta, now, end = {0, 0};
+ int started = 0;
int result, timeout_remaining_ms;
struct pollfd *pollfds;
unsigned int i;
/* Loop until an event occurs. */
while (1) {
- if (timeout_ms) {
+ /*
+ * Check timeout only if we have run poll() at least once,
+ * to avoid any issues if a short timeout is reached before
+ * poll() is even run.
+ */
+ if (!timeout_ms) {
+ timeout_remaining_ms = -1;
+ } else if (!started) {
+ timeout_remaining_ms = timeout_ms;
+ } else {
gettimeofday(&now, NULL);
if (timercmp(&now, &end, >)) {
DEBUG("Wait timed out");
timeout_remaining_ms = delta.tv_sec * 1000 + delta.tv_usec / 1000;
}
- result = poll(pollfds, event_set->count, timeout_ms ? timeout_remaining_ms : -1);
+ result = poll(pollfds, event_set->count, timeout_remaining_ms);
+ started = 1;
if (result < 0) {
if (errno == EINTR) {
projects / libserialport.git / blobdiff