| 2017-07-09 |
Uwe Hermann | layout: Load and resave via Kicad 4.0.5, update from...
|
commit | commitdiff | tree |
| 2017-07-09 |
Uwe Hermann | Regenerate netlist.
|
commit | commitdiff | tree |
| 2017-07-09 |
Uwe Hermann | schematics: Load and resave via Kicad 4.0.5, fixup...
|
commit | commitdiff | tree |
| 2014-07-22 |
Uwe Hermann | Drop references to obsolete sigrok-commits mailing...
|
commit | commitdiff | tree |
| 2013-04-26 |
Uwe Hermann | README: Add "Copyright and license" section.
|
commit | commitdiff | tree |
| 2013-04-06 |
Uwe Hermann | PCB: Arrange and connect various parts/pins.
|
commit | commitdiff | tree |
| 2013-04-04 |
Uwe Hermann | Various updates.
|
commit | commitdiff | tree |
| 2013-03-26 |
Uwe Hermann | Replace 5x2 SMD connector with two 5x1 pins/pads.
|
commit | commitdiff | tree |
| 2013-03-25 |
Uwe Hermann | Update PCB layout (removed resistor-pack).
|
commit | commitdiff | tree |
| 2013-03-25 |
Uwe Hermann | Update netlist.
|
commit | commitdiff | tree |
| 2013-03-25 |
Uwe Hermann | Schematics: Drop resistor-pack for now.
|
commit | commitdiff | tree |
| 2012-10-23 |
Uwe Hermann | Schematics: Fix wiki page URL.
|
commit | commitdiff | tree |
| 2012-10-23 |
Uwe Hermann | README: Update description and git URL.
|
commit | commitdiff | tree |
| 2012-10-23 |
Uwe Hermann | First unfinished attempt at routing the board.
|
commit | commitdiff | tree |
| 2012-10-23 |
Uwe Hermann | Switch 5mil tracks, 0.2mm vias (0.25mm restring).
|
commit | commitdiff | tree |
| 2012-10-23 |
Uwe Hermann | Update PCB to new netlist.
|
commit | commitdiff | tree |
| 2012-10-23 |
Uwe Hermann | schematic: Various simplifications and fixes, regen...
|
commit | commitdiff | tree |
| 2012-06-06 |
Uwe Hermann | Start arranging components (unfinished).
|
commit | commitdiff | tree |
| 2012-06-05 |
Uwe Hermann | Stuff everything into 12mm x 12mm PCB borders.
|
commit | commitdiff | tree |
| 2012-06-05 |
Uwe Hermann | schematics: Fix typo.
|
commit | commitdiff | tree |
| 2012-06-05 |
Uwe Hermann | Draw 16mm x 12mm PCB borders (for now).
|
commit | commitdiff | tree |
| 2012-06-04 |
Uwe Hermann | PCB: Tigthen DRC settings.
|
commit | commitdiff | tree |
| 2012-06-04 |
Uwe Hermann | Re-read netlist in the PCB.
|
commit | commitdiff | tree |
| 2012-06-04 |
Uwe Hermann | Add CONN-5x2-SMD-127MM footprint.
|
commit | commitdiff | tree |
| 2012-06-04 |
Uwe Hermann | Update netlist.
|
commit | commitdiff | tree |
| 2012-06-04 |
Uwe Hermann | schematics: Add 10pin connector for the probes.
|
commit | commitdiff | tree |
| 2012-06-04 |
Uwe Hermann | schematics: Replace 0603 resistorpack with 0402 one.
|
commit | commitdiff | tree |
| 2012-06-04 |
Uwe Hermann | Add RPACK-8-SMD-0402 footprint.
|
commit | commitdiff | tree |
| 2012-06-04 |
Uwe Hermann | Update PCB due to netlist changes.
|
commit | commitdiff | tree |
| 2012-06-04 |
Uwe Hermann | Regenerate netlist.
|
commit | commitdiff | tree |
| 2012-06-04 |
Uwe Hermann | schematics: Change all 0603 parts to 0402.
|
commit | commitdiff | tree |
| 2012-06-04 |
Uwe Hermann | Start arranging parts.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | PCB: Disperse parts a bit.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | PCB: Read in netlist.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | PCB: Set DRC values (min. widths etc).
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Re-create netlist.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Bugfix: Replace 2-pin CRYSTAL with 4-pin QUARTZCMS4.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Micro-USB B SMD footprint: Add missing SHIELD pin numbers.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Re-run 'Annotate schematic'.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | schematic: RESET# needs a 2K7 and 1uF (TRM, p. 83).
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Add QFN56 (0.5mm pin spacing) footprint.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Add AMB11 footprint (crystal).
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Add RPACK-8-SMD-0603 footprint.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Add empty PCB.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Generate netlist.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | schematic: Annotate all components.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Add missing footprint for the resistorpack.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | schematic: Various fixes, add metadata.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | schematic: Add PWR_FLAG (Kicad-internal stuff).
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Add new footprint library to project.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Add a MICRO-USB-B-SMD footprint to a new library.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Add some more footprints for symbols.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Mark a few more pins as no-connect for now.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Fix a few pin types.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Bugfix: USB shield pins were not properly connected.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Add footprints for all 0603 parts.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Add resistorpack (8 x 100 Ohm) to PB0-PB7.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Add two optional general-purpose LEDs (PD0/1).
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Add a power LED.
|
commit | commitdiff | tree |
| 2012-06-03 |
Uwe Hermann | Replace TLV1117 with MIC5319.
|
commit | commitdiff | tree |
| 2012-06-02 |
Uwe Hermann | Change Mini-USB B to Micro-USB B connector.
|
commit | commitdiff | tree |
| 2012-06-02 |
Uwe Hermann | FX2: Use "IC", not "U" for the chip refdes.
|
commit | commitdiff | tree |
| 2012-06-02 |
Uwe Hermann | RESET# is tied to VCC via a resistor.
|
commit | commitdiff | tree |
| 2012-06-02 |
Uwe Hermann | Various updates, move stuff around, add pin names.
|
commit | commitdiff | tree |
| 2012-06-02 |
Uwe Hermann | Use 12pF load capacitors for the crystal.
|
commit | commitdiff | tree |
| 2012-06-02 |
Uwe Hermann | 2.2uF/100nF for all AVCC pins (as per docs).
|
commit | commitdiff | tree |
| 2012-06-02 |
Uwe Hermann | Add 100nF bypass caps for all VCC pins.
|
commit | commitdiff | tree |
| 2012-06-02 |
Uwe Hermann | FX2: The WAKEUP pin is tied to VCC via a 100K resistor.
|
commit | commitdiff | tree |
| 2012-06-02 |
Uwe Hermann | FX2: The RESERVED pin needs to be tied to GND.
|
commit | commitdiff | tree |
| 2012-06-02 |
Uwe Hermann | Add I2C pullups (2.2kOhm).
|
commit | commitdiff | tree |
| 2012-06-02 |
Uwe Hermann | Add a README.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | lib: FX2 symbol: Nicer active-low pin marking.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | Add VCC/GND circuitry, mark PA0-7/PD0-7 as no-connect.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | Add initial XTAL circuitry.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | Add initial USB connector circuitry.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | Add initial TLV1117 circuitry.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | Fill background of FX2 component.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | Place FX2, TLV1117, and USB connector components.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | Add TLV1117-33 symbol to library.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | Add MINI-USB-B-SMD symbol to library.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | Add fx2grok-cube.lib library to project.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | Move files to 0.1 subdir.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | Add initial Cypress CY7C68013A-56 symbol.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | Add empty schematics.
|
commit | commitdiff | tree |
| 2012-06-01 |
Uwe Hermann | Add empty Kicad project.
|
commit | commitdiff | tree |
|
projects / fx2grok.git / search