sigrok.org Git - fx2grok.git/search

]> sigrok.org Git - fx2grok.git/search

2012-06-04	Uwe Hermann	schematics: Add 10pin connector for the probes.	commit \| commitdiff \| tree
2012-06-04	Uwe Hermann	schematics: Replace 0603 resistorpack with 0402 one.	commit \| commitdiff \| tree
2012-06-04	Uwe Hermann	Add RPACK-8-SMD-0402 footprint.	commit \| commitdiff \| tree
2012-06-04	Uwe Hermann	Update PCB due to netlist changes.	commit \| commitdiff \| tree
2012-06-04	Uwe Hermann	Regenerate netlist.	commit \| commitdiff \| tree
2012-06-04	Uwe Hermann	schematics: Change all 0603 parts to 0402.	commit \| commitdiff \| tree
2012-06-04	Uwe Hermann	Start arranging parts.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	PCB: Disperse parts a bit.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	PCB: Read in netlist.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	PCB: Set DRC values (min. widths etc).	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Re-create netlist.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Bugfix: Replace 2-pin CRYSTAL with 4-pin QUARTZCMS4.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Micro-USB B SMD footprint: Add missing SHIELD pin numbers.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Re-run 'Annotate schematic'.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	schematic: RESET# needs a 2K7 and 1uF (TRM, p. 83).	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Add QFN56 (0.5mm pin spacing) footprint.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Add AMB11 footprint (crystal).	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Add RPACK-8-SMD-0603 footprint.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Add empty PCB.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Generate netlist.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	schematic: Annotate all components.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Add missing footprint for the resistorpack.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	schematic: Various fixes, add metadata.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	schematic: Add PWR_FLAG (Kicad-internal stuff).	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Add new footprint library to project.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Add a MICRO-USB-B-SMD footprint to a new library.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Add some more footprints for symbols.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Mark a few more pins as no-connect for now.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Fix a few pin types.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Bugfix: USB shield pins were not properly connected.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Add footprints for all 0603 parts.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Add resistorpack (8 x 100 Ohm) to PB0-PB7.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Add two optional general-purpose LEDs (PD0/1).	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Add a power LED.	commit \| commitdiff \| tree
2012-06-03	Uwe Hermann	Replace TLV1117 with MIC5319.	commit \| commitdiff \| tree
2012-06-02	Uwe Hermann	Change Mini-USB B to Micro-USB B connector.	commit \| commitdiff \| tree
2012-06-02	Uwe Hermann	FX2: Use "IC", not "U" for the chip refdes.	commit \| commitdiff \| tree
2012-06-02	Uwe Hermann	RESET# is tied to VCC via a resistor.	commit \| commitdiff \| tree
2012-06-02	Uwe Hermann	Various updates, move stuff around, add pin names.	commit \| commitdiff \| tree
2012-06-02	Uwe Hermann	Use 12pF load capacitors for the crystal.	commit \| commitdiff \| tree
2012-06-02	Uwe Hermann	2.2uF/100nF for all AVCC pins (as per docs).	commit \| commitdiff \| tree
2012-06-02	Uwe Hermann	Add 100nF bypass caps for all VCC pins.	commit \| commitdiff \| tree
2012-06-02	Uwe Hermann	FX2: The WAKEUP pin is tied to VCC via a 100K resistor.	commit \| commitdiff \| tree
2012-06-02	Uwe Hermann	FX2: The RESERVED pin needs to be tied to GND.	commit \| commitdiff \| tree
2012-06-02	Uwe Hermann	Add I2C pullups (2.2kOhm).	commit \| commitdiff \| tree
2012-06-02	Uwe Hermann	Add a README.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	lib: FX2 symbol: Nicer active-low pin marking.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	Add VCC/GND circuitry, mark PA0-7/PD0-7 as no-connect.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	Add initial XTAL circuitry.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	Add initial USB connector circuitry.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	Add initial TLV1117 circuitry.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	Fill background of FX2 component.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	Place FX2, TLV1117, and USB connector components.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	Add TLV1117-33 symbol to library.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	Add MINI-USB-B-SMD symbol to library.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	Add fx2grok-cube.lib library to project.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	Move files to 0.1 subdir.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	Add initial Cypress CY7C68013A-56 symbol.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	Add empty schematics.	commit \| commitdiff \| tree
2012-06-01	Uwe Hermann	Add empty Kicad project.	commit \| commitdiff \| tree

Tiny Open-Hardware FX2 LA

RSS Atom