2020-10-22 |
Gerhard Sittig | serial: extend stream detect for variable length packet... |
tree | commitdiff |
2020-10-06 |
Timo Kokkonen | rigol-dg: Add device/firmware specific quirks support. |
tree | commitdiff |
2020-10-06 |
Gerhard Sittig | itech-it8500: avoid "new" as a variable identifier |
tree | commitdiff |
2020-10-06 |
Gerhard Sittig | itech-it8500: declaration nits |
tree | commitdiff |
2020-10-06 |
Gerhard Sittig | itech-it8500: rephrase config get/set/list, reflect... |
tree | commitdiff |
2020-10-06 |
Timo Kokkonen | itech-it8500: ITECH IT8500 series DC electronic load... |
tree | commitdiff |
2020-10-06 |
Timo Kokkonen | itech-it8500: Initial driver skeleton. |
tree | commitdiff |
2020-10-04 |
Timo Kokkonen | rigol-dg: Fix reading current output signal duty cycle... |
tree | commitdiff |
2020-10-04 |
Timo Kokkonen | rigol-dg: Add Rigol DG800 and DG900 series support. |
tree | commitdiff |
2020-10-03 |
Gerhard Sittig | pce-322a: unbreak send_command() return code |
tree | commitdiff |
2020-09-28 |
Gerhard Sittig | rigol-dg: reduce redundancy in malloc() calls |
tree | commitdiff |
2020-09-28 |
Timo Kokkonen | rigol-dg: Initial Rigol DG1000z driver implementation. |
tree | commitdiff |
2020-09-28 |
Timo Kokkonen | rigol-dg: Initial driver skeleton. |
tree | commitdiff |
2020-09-27 |
Gerhard Sittig | ols: more robust device reset in acquisition stop |
tree | commitdiff |
2020-09-24 |
Ben Gardiner | ols: send CMD_RESET on acquisition stop |
tree | commitdiff |
2020-09-21 |
Gerhard Sittig | brymen-dmm: unbreak dBm reference impedance interpretation |
tree | commitdiff |
2020-09-21 |
Gerhard Sittig | brymen-dmm: unbreak temperature response parsing |
tree | commitdiff |
2020-09-21 |
Gerhard Sittig | brymen-dmm: rephrase bfunc and value text parsing |
tree | commitdiff |
2020-09-21 |
Gerhard Sittig | brymen-dmm: improve text to number conversion robustnes... |
tree | commitdiff |
2020-09-20 |
Gerhard Sittig | brymen-dmm: style nits, apply comm param defaults,... |
tree | commitdiff |
2020-09-20 |
Gerhard Sittig | brymen-dmm: unbreak BM85x communication by pulsing... |
tree | commitdiff |
2020-09-19 |
Gerhard Sittig | dmm/bm52x: introduce support for Brymen BM525s |
tree | commitdiff |
2020-09-19 |
Gerhard Sittig | serial-dmm: only do bytes to text conversion at higher... |
tree | commitdiff |
2020-09-01 |
Gerhard Sittig | korad-kaxxxxp: remove obsolete code (clear before read... |
tree | commitdiff |
2020-09-01 |
Gerhard Sittig | korad-kaxxxxp: speed up scan process, rephrase response... |
tree | commitdiff |
2020-08-28 |
Gerhard Sittig | korad-kaxxxxp: style cleanup in device scan, keep serno... |
tree | commitdiff |
2020-08-25 |
Gerhard Sittig | scpi-pps: use remote and local modes for HMP4000 |
tree | commitdiff |
2020-08-25 |
Gerhard Sittig | scpi-pps: Add more HMP4000 series devices |
tree | commitdiff |
2020-08-25 |
Florian Schmidt | scpi-pps: add support for Hameg / Rohde & Schwarz HMP4040 |
tree | commitdiff |
2020-08-25 |
Gerhard Sittig | scpi-dmm: factor out some OL detection limits |
tree | commitdiff |
2020-08-25 |
Gerhard Sittig | scpi-dmm: add SR_CONF_CONN getter |
tree | commitdiff |
2020-08-24 |
v1ne | ols: Detect Demon Core, use its canonic command names |
tree | commitdiff |
2020-08-24 |
v1ne | ols: Refactor, deduplicate logic packet code |
tree | commitdiff |
2020-08-24 |
v1ne | ols: Use symbolic name for "success" error code. |
tree | commitdiff |
2020-08-24 |
v1ne | ols: Make constant names more precise, clarify comment |
tree | commitdiff |
2020-08-24 |
v1ne | ols: Rename "flags" to "capture flags". |
tree | commitdiff |
2020-08-24 |
v1ne | ols: Symbolic name for magic value, reflect units in... |
tree | commitdiff |
2020-08-24 |
v1ne | ols: Remove stray command |
tree | commitdiff |
2020-08-24 |
v1ne | ols: Make use of zero-initialization. |
tree | commitdiff |
2020-08-22 |
Frank Stettner | teleinfo: Fix measured quantity (energy, not power). |
tree | commitdiff |
2020-08-22 |
Timo Kokkonen | serial-dmm: Add GW Instek GDM-397 meter support. |
tree | commitdiff |
2020-08-22 |
Gerhard Sittig | korad-kaxxxxp: add support for forced "detection" of... |
tree | commitdiff |
2020-08-22 |
Gerhard Sittig | korad-kaxxxxp: add config_get() support for SR_CONF_CONN |
tree | commitdiff |
2020-08-20 |
Timo Kokkonen | scpi-dmm: Remove SYST:LOC hack for GWInstek meters. |
tree | commitdiff |
2020-08-20 |
Timo Kokkonen | scpi-dmm: Add new command DMM_CMD_SETUP_LOCAL. |
tree | commitdiff |
2020-08-17 |
Gerhard Sittig | scpi-dmm: alpha-sort the list of supported devices... |
tree | commitdiff |
2020-08-17 |
Gerhard Sittig | scpi-dmm: minor style adjustment (gdm906x, analog init... |
tree | commitdiff |
2020-08-17 |
Timo Kokkonen | scpi-dmm: Add support for GW-Instek 906X series bench... |
tree | commitdiff |
2020-08-17 |
Timo Kokkonen | scpi-dmm: Add support for GW-Instek 8200A series bench... |
tree | commitdiff |
2020-08-03 |
Timo Kokkonen | gwinstek-gpd: Add missing SW limits API calls. |
tree | commitdiff |
2020-08-01 |
Timo Kokkonen | gwinstek-gpd: Add support to old (hardware) revision... |
tree | commitdiff |
2020-07-31 |
Timo Kokkonen | gwinstek-gpd: Add support for GPD-3303S. |
tree | commitdiff |
2020-07-27 |
Mike Walters | scpi-dmm: Add Agilent 34410A. |
tree | commitdiff |
2020-07-26 |
Wolfram Sang | serial: flush() after open() in the serial core. |
tree | commitdiff |
2020-07-13 |
Soeren Apel | fx2lafw: Use 1 as default for frame limit and reset... |
tree | commitdiff |
2020-07-13 |
Valentin Ochs | fx2lafw: Add support for frames |
tree | commitdiff |
2020-07-13 |
motte | Korad-kaxxxxp: Add model Tenma 72-2550 |
tree | commitdiff |
2020-07-12 |
Valentin Ochs | Fix #1576 by handling DSO1000B's CHAN#:PROB? responses |
tree | commitdiff |
2020-07-12 |
Valentin Ochs | serial-lcr: Allow retrieving frame limit |
tree | commitdiff |
2020-06-27 |
Valentin Ochs | rigol-ds: Allow retrieving frame limit |
tree | commitdiff |
2020-06-27 |
Valentin Ochs | hantek-dso: Allow retrieving frame limit |
tree | commitdiff |
2020-06-27 |
Valentin Ochs | hameg-hmo: Allow retrieving frame limit |
tree | commitdiff |
2020-06-27 |
Valentin Ochs | gwinstek-gds-800: Allow retrieving frame limit |
tree | commitdiff |
2020-06-24 |
Andy Lutomirski | rigol-ds: Improve short block handling |
tree | commitdiff |
2020-06-24 |
Valentin Ochs | rigol-ds: Send some commands on 1st frame only |
tree | commitdiff |
2020-06-24 |
Valentin Ochs | rigol-ds: Experimental support for segmented data with... |
tree | commitdiff |
2020-06-24 |
Valentin Ochs | rigol-ds: Experimental support for V5 frame reading |
tree | commitdiff |
2020-06-24 |
Valentin Ochs | rigol-ds: Add support for reading segmented data for... |
tree | commitdiff |
2020-06-24 |
Valentin Ochs | rigol-ds: Fix reading data from internal memory |
tree | commitdiff |
2020-06-24 |
Valentin Ochs | rigol-ds: Get correct samplerate for Memory and Segment... |
tree | commitdiff |
2020-06-24 |
Valentin Ochs | rigol-ds: Do not stop reading after the first frame |
tree | commitdiff |
2020-06-20 |
Walter Goossens | korad-kaxxxxp: Add KA3005P v5.5 |
tree | commitdiff |
2020-06-13 |
Wolfram Sang | openbench-logic-sniffer: improve error messages when... |
tree | commitdiff |
2020-06-08 |
Florian Schmidt | kingst-la2016: improved bitstream upload and fix for... |
tree | commitdiff |
2020-06-06 |
Uwe Hermann | kingst-la2016: Use ARRAY_SIZE. |
tree | commitdiff |
2020-06-06 |
Florian Schmidt | kingst-la2016: tested with idVendor=77a1, idProduct... |
tree | commitdiff |
2020-06-04 |
Andreas Sandberg | rdtech-tc: Add initial support for the RDTech TC66C |
tree | commitdiff |
2020-06-04 |
Andreas Sandberg | rdtech-um: Add initial support for the RDTech UMxx... |
tree | commitdiff |
2020-06-01 |
Gerhard Sittig | uni-t-ut181a: comment on how to start a recording |
tree | commitdiff |
2020-06-01 |
Gerhard Sittig | uni-t-ut181a: implement device driver for the UNI-T... |
tree | commitdiff |
2020-06-01 |
Gerhard Sittig | uni-t-ut181a: Initial driver skeleton. |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: discuss usability of data pattern trigger... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: unconditionally re-enable trigger support... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: complete and extend capture mode supervision |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: download sample memory in multiple receive... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: drop obsolete "trigger countdown" in sample... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: re-enable software check for exact trigger... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: rephrase sample memory iteration position... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: rework outer sample download loop (DRAM... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: more trigger LUT download rephrase, think... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: concentrate more sample memory interpretati... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: concentrate parameters for sample memory... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: force strict boolen arith in LUT item manip... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: use more helpers for bit mask creation |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: rephrase limits management, use sub structure |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: track whether triggers were specified when... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: enable trigger support code (development... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: data type nits, minor variable renames |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: prepare configuration re-use across sigrok... |
tree | commitdiff |
2020-05-31 |
Gerhard Sittig | asix-sigma: nits in the hardware configuration declaration |
tree | commitdiff |
next |