]> sigrok.org Git - libsigrok.git/commitdiff
scpi-pps: Add support for Fluke/Philips PM2800 series.
authorBert Vermeulen <redacted>
Sat, 18 Oct 2014 21:20:47 +0000 (23:20 +0200)
committerBert Vermeulen <redacted>
Sat, 18 Oct 2014 21:21:37 +0000 (23:21 +0200)
src/hardware/scpi-pps/profiles.c

index eea5666c555c1442693911daae6c09be3eadf9bd..5be14127b9020e62ffeaace7b96b9e4e6435045f 100644 (file)
@@ -25,6 +25,7 @@
 const char *pps_vendors[][2] = {
        { "RIGOL TECHNOLOGIES", "Rigol" },
        { "HEWLETT-PACKARD", "HP" },
+       { "PHILIPS", "Philips" },
 };
 
 const char *get_vendor(const char *raw_vendor)
@@ -147,6 +148,153 @@ struct scpi_command hp_6632b_cmd[] = {
        { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
 };
 
+/* Philips/Fluke PM2800 series */
+static const uint32_t philips_pm2800_devopts[] = {
+       SR_CONF_POWER_SUPPLY,
+       SR_CONF_CONTINUOUS,
+};
+
+static const uint32_t philips_pm2800_devopts_cg[] = {
+       SR_CONF_OUTPUT_ENABLED | SR_CONF_GET | SR_CONF_SET,
+       SR_CONF_OUTPUT_VOLTAGE | SR_CONF_GET,
+       SR_CONF_OUTPUT_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+       SR_CONF_OUTPUT_CURRENT | SR_CONF_GET,
+       SR_CONF_OUTPUT_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+       SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
+       SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
+       SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
+       SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET,
+       SR_CONF_OUTPUT_REGULATION | SR_CONF_GET,
+};
+
+enum philips_pm2800_modules {
+       PM2800_MOD_30V_10A = 1,
+       PM2800_MOD_60V_5A,
+       PM2800_MOD_60V_10A,
+       PM2800_MOD_8V_15A,
+       PM2800_MOD_60V_2A,
+       PM2800_MOD_120V_1A,
+};
+
+static struct philips_pm2800_module_spec {
+       /* Min, max, programming resolution. */
+       float voltage[3];
+       float current[3];
+} philips_pm2800_module_specs[] = {
+       /* Autoranging modules. */
+       [PM2800_MOD_30V_10A] = { { 0, 30, 0.0075 }, { 0, 10, 0.0025 } },
+       [PM2800_MOD_60V_5A] = { { 0, 60, 0.015 }, { 0, 5, 0.00125 } },
+       [PM2800_MOD_60V_10A] = { { 0, 60, 0.015 }, { 0, 10, 0.0025 } },
+       /* Linear modules. */
+       [PM2800_MOD_8V_15A] = { { 0, 8, 0.002 }, { -15, 15, 0.00375 } },
+       [PM2800_MOD_60V_2A] = { { 0, 60, 0.015 }, { -2, 2, 0.0005 } },
+       [PM2800_MOD_120V_1A] = { { 0, 120, 0.030 }, { -1, 1, 0.00025 } },
+};
+
+static struct philips_pm2800_model {
+       unsigned int chassis;
+       unsigned int num_modules;
+       unsigned int set;
+       unsigned int modules[3];
+} philips_pm2800_matrix[] = {
+       /* Autoranging chassis. */
+       { 1, 1, 0, { PM2800_MOD_30V_10A, 0, 0 } },
+       { 1, 1, 1, { PM2800_MOD_60V_5A, 0, 0 } },
+       { 1, 2, 0, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, 0 } },
+       { 1, 2, 1, { PM2800_MOD_60V_5A, PM2800_MOD_60V_5A, 0 } },
+       { 1, 2, 2, { PM2800_MOD_30V_10A, PM2800_MOD_60V_5A, 0 } },
+       { 1, 2, 3, { PM2800_MOD_30V_10A, PM2800_MOD_60V_10A, 0 } },
+       { 1, 2, 4, { PM2800_MOD_60V_5A, PM2800_MOD_60V_10A, 0 } },
+       { 1, 3, 0, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, PM2800_MOD_30V_10A } },
+       { 1, 3, 1, { PM2800_MOD_60V_5A, PM2800_MOD_60V_5A, PM2800_MOD_60V_5A } },
+       { 1, 3, 2, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, PM2800_MOD_60V_5A } },
+       { 1, 3, 3, { PM2800_MOD_30V_10A, PM2800_MOD_60V_5A, PM2800_MOD_60V_5A } },
+       /* Linear chassis. */
+       { 3, 1, 0, { PM2800_MOD_60V_2A, 0, 0 } },
+       { 3, 1, 1, { PM2800_MOD_120V_1A, 0, 0 } },
+       { 3, 1, 2, { PM2800_MOD_8V_15A, 0, 0 } },
+       { 3, 2, 0, { PM2800_MOD_60V_2A, 0, 0 } },
+       { 3, 2, 1, { PM2800_MOD_120V_1A, 0, 0 } },
+       { 3, 2, 2, { PM2800_MOD_60V_2A, PM2800_MOD_120V_1A, 0 } },
+       { 3, 2, 3, { PM2800_MOD_8V_15A, PM2800_MOD_8V_15A, 0 } },
+};
+
+static char *philips_pm2800_names[] = { "1", "2", "3" };
+
+static int philips_pm2800_probe_channels(struct sr_dev_inst *sdi,
+               struct sr_scpi_hw_info *hw_info,
+               struct channel_spec **channels, unsigned int *num_channels,
+               struct channel_group_spec **channel_groups, unsigned int *num_channel_groups)
+{
+       struct philips_pm2800_model *model;
+       struct philips_pm2800_module_spec *spec;
+       unsigned int chassis, num_modules, set, module, m, i;
+
+       (void)sdi;
+
+       /*
+        * The model number as reported by *IDN? looks like e.g. PM2813/11,
+        * Where "PM28" is fixed, followed by the chassis code (1 = autoranging,
+        * 3 = linear series) and the number of modules: 1-3 for autoranging,
+        * 1-2 for linear.
+        * After the slash, the first digit denotes the module set. The
+        * digit after that denotes front (5) or rear (1) binding posts.
+        */
+       chassis = hw_info->model[4] - 0x30;
+       num_modules = hw_info->model[5] - 0x30;
+       set = hw_info->model[7] - 0x30;
+       for (m = 0; m < ARRAY_SIZE(philips_pm2800_matrix); m++) {
+               model = &philips_pm2800_matrix[m];
+               if (model->chassis == chassis && model->num_modules == num_modules
+                               && model->set == set)
+                       break;
+       }
+       if (m == ARRAY_SIZE(philips_pm2800_matrix)) {
+               sr_dbg("Model %s not found in matrix.", hw_info->model);
+               return SR_ERR;
+       }
+
+       sr_dbg("Found %d output channel%s:", num_modules, num_modules > 1 ? "s" : "");
+       *channels = g_malloc0(sizeof(struct channel_spec) * num_modules);
+       *channel_groups = g_malloc0(sizeof(struct channel_group_spec) * num_modules);
+       for (i = 0; i < num_modules; i++) {
+               module = model->modules[i];
+               spec = &philips_pm2800_module_specs[module];
+               sr_dbg("output %d: %.0f - %.0fV, %.0f - %.0fA", i + 1,
+                               spec->voltage[0], spec->voltage[1],
+                               spec->current[0], spec->current[1]);
+               (*channels)[i].name = philips_pm2800_names[i];
+               memcpy(&((*channels)[i].voltage), spec, sizeof(float) * 6);
+               (*channel_groups)[i].name = philips_pm2800_names[i];
+               (*channel_groups)[i].channel_index_mask = 1 << i;
+               (*channel_groups)[i].features = PPS_OTP | PPS_OVP | PPS_OCP;
+       }
+       *num_channels = *num_channel_groups = num_modules;
+
+       return SR_OK;
+}
+
+struct scpi_command philips_pm2800_cmd[] = {
+       { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" },
+       { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
+       { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
+       { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
+       { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
+       { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
+       { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
+       { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" },
+       { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" },
+       { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" },
+       { SCPI_CMD_GET_OUTPUT_REGULATION, ":SOUR:FUNC:MODE?" },
+       { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, ":SOUR:VOLT:PROT:TRIP?" },
+       { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:LEV?" },
+       { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:LEV %.6f" },
+       { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":SOUR:CURR:PROT:STAT?" },
+       { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":SOUR:CURR:PROT:STAT ON" },
+       { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":SOUR:CURR:PROT:STAT OFF" },
+       { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":SOUR:CURR:PROT:TRIP?" },
+};
+
 
 SR_PRIV const struct scpi_pps pps_profiles[] = {
        /* HP 6632B */
@@ -156,6 +304,7 @@ SR_PRIV const struct scpi_pps pps_profiles[] = {
                ARRAY_AND_SIZE(hp_6632b_ch),
                ARRAY_AND_SIZE(hp_6632b_cg),
                ARRAY_AND_SIZE(hp_6632b_cmd),
+               .probe_channels = NULL,
        },
 
        /* Rigol DP800 series */
@@ -165,6 +314,7 @@ SR_PRIV const struct scpi_pps pps_profiles[] = {
                ARRAY_AND_SIZE(rigol_dp831_ch),
                ARRAY_AND_SIZE(rigol_dp800_cg),
                ARRAY_AND_SIZE(rigol_dp800_cmd),
+               .probe_channels = NULL,
        },
        { "Rigol", "^(DP832|DP832A)$", PPS_OTP,
                ARRAY_AND_SIZE(rigol_dp800_devopts),
@@ -172,6 +322,17 @@ SR_PRIV const struct scpi_pps pps_profiles[] = {
                ARRAY_AND_SIZE(rigol_dp832_ch),
                ARRAY_AND_SIZE(rigol_dp800_cg),
                ARRAY_AND_SIZE(rigol_dp800_cmd),
+               .probe_channels = NULL,
+       },
+
+       /* Philips/Fluke PM2800 series */
+       { "Philips", "^PM28[13][123]/[01234]{1,2}$", 0,
+               ARRAY_AND_SIZE(philips_pm2800_devopts),
+               ARRAY_AND_SIZE(philips_pm2800_devopts_cg),
+               NULL, 0,
+               NULL, 0,
+               ARRAY_AND_SIZE(philips_pm2800_cmd),
+               philips_pm2800_probe_channels,
        },
 };
 SR_PRIV unsigned int num_pps_profiles = ARRAY_SIZE(pps_profiles);