*
* @param serial Previously initialized serial port structure.
* @param[in] flags Flags to use when opening the serial port. Possible flags
- * include SERIAL_RDWR, SERIAL_RDONLY.
+ * include SERIAL_RDWR, SERIAL_RDONLY.
*
* If the serial structure contains a serialcomm string, it will be
* passed to serial_set_paramstr() after the port is opened.
* @param[in] timeout_ms Timeout in ms, or 0 for no timeout.
*
* @retval SR_ERR_ARG Invalid argument.
- * @retval SR_ERR Other error.
- * @retval other The number of bytes read. If this is less than the number
+ * @retval SR_ERR Other error.
+ * @retval other The number of bytes read. If this is less than the number
* requested, the timeout was reached.
*
* @private
* @param[in] count The number of bytes to read.
*
* @retval SR_ERR_ARG Invalid argument.
- * @retval SR_ERR Other error.
- * @retval other The number of bytes read.
+ * @retval SR_ERR Other error.
+ * @retval other The number of bytes read.
*
* @private
*/
* @param[in] parity The parity setting to use (0 = none, 1 = even, 2 = odd).
* @param[in] stopbits The number of stop bits to use (1 or 2).
* @param[in] flowcontrol The flow control settings to use (0 = none,
- * 1 = RTS/CTS, 2 = XON/XOFF).
+ * 1 = RTS/CTS, 2 = XON/XOFF).
* @param[in] rts Status of RTS line (0 or 1; required by some interfaces).
* @param[in] dtr Status of DTR line (0 or 1; required by some interfaces).
*
* @param serial Previously initialized serial port structure.
* @param[in] paramstr A serial communication parameters string of the form
* "<baudrate>/<bits><parity><stopbits>{/<option>}".\n
- * Examples: "9600/8n1", "600/7o2/dtr=1/rts=0" or "460800/8n1/flow=2".\n
+ * Examples: "9600/8n1", "600/7o2/dtr=1/rts=0" or "460800/8n1/flow=2".\n
* \<baudrate\>=integer Baud rate.\n
* \<bits\>=5|6|7|8 Number of data bits.\n
* \<parity\>=n|e|o None, even, odd.\n
* @param[in] packet_size Size, in bytes, of a valid packet.
* @param is_valid Callback that assesses whether the packet is valid or not.
* @param[in] timeout_ms The timeout after which, if no packet is detected, to
- * abort scanning.
+ * abort scanning.
* @param[in] baudrate The baudrate of the serial port. This parameter is not
- * critical, but it helps fine tune the serial port polling
- * delay.
+ * critical, but it helps fine tune the serial port polling
+ * delay.
*
* @retval SR_OK Valid packet was found within the given timeout.
* @retval SR_ERR Failure.