* This file is part of the libsigrok project.
*
* Copyright (C) 2013 poljar (Damir Jelić) <poljarinho@gmail.com>
+ * Copyright (C) 2015 Bert Vermeulen <bert@biot.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define SCPI_READ_RETRIES 100
#define SCPI_READ_RETRY_TIMEOUT_US (10 * 1000)
+static const char *scpi_vendors[][2] = {
+ { "Agilent Technologies", "Agilent" },
+ { "CHROMA", "Chroma" },
+ { "Chroma ATE", "Chroma" },
+ { "HEWLETT-PACKARD", "HP" },
+ { "Keysight Technologies", "Keysight" },
+ { "PHILIPS", "Philips" },
+ { "RIGOL TECHNOLOGIES", "Rigol" },
+};
+
/**
* Parse a string representation of a boolean-like value into a gboolean.
* Similar to sr_parse_boolstring but rejects strings which do not represent
#ifdef HAVE_LIBGPIB
&scpi_libgpib_dev,
#endif
-#ifdef HAVE_LIBSERIALPORT
+#ifdef HAVE_SERIAL_COMM
&scpi_serial_dev, /* Must be last as it matches any resource. */
#endif
};
return sdi;
}
+/**
+ * Send a SCPI command with a variadic argument list without mutex.
+ *
+ * @param scpi Previously initialized SCPI device structure.
+ * @param format Format string.
+ * @param args Argument list.
+ *
+ * @return SR_OK on success, SR_ERR on failure.
+ */
+static int scpi_send_variadic(struct sr_scpi_dev_inst *scpi,
+ const char *format, va_list args)
+{
+ va_list args_copy;
+ char *buf;
+ int len, ret;
+
+ /* Get length of buffer required. */
+ va_copy(args_copy, args);
+ len = sr_vsnprintf_ascii(NULL, 0, format, args_copy);
+ va_end(args_copy);
+
+ /* Allocate buffer and write out command. */
+ buf = g_malloc0(len + 2);
+ sr_vsprintf_ascii(buf, format, args);
+ if (buf[len - 1] != '\n')
+ buf[len] = '\n';
+
+ /* Send command. */
+ ret = scpi->send(scpi->priv, buf);
+
+ /* Free command buffer. */
+ g_free(buf);
+
+ return ret;
+}
+
+/**
+ * Send a SCPI command without mutex.
+ *
+ * @param scpi Previously initialized SCPI device structure.
+ * @param format Format string, to be followed by any necessary arguments.
+ *
+ * @return SR_OK on success, SR_ERR on failure.
+ */
+static int scpi_send(struct sr_scpi_dev_inst *scpi, const char *format, ...)
+{
+ va_list args;
+ int ret;
+
+ va_start(args, format);
+ ret = scpi_send_variadic(scpi, format, args);
+ va_end(args);
+
+ return ret;
+}
+
+/**
+ * Send data to SCPI device without mutex.
+ *
+ * TODO: This is only implemented in TcpRaw, but never used.
+ * TODO: Use Mutex at all?
+ *
+ * @param scpi Previously initialised SCPI device structure.
+ * @param buf Buffer with data to send.
+ * @param len Number of bytes to send.
+ *
+ * @return Number of bytes read, or SR_ERR upon failure.
+ */
+static int scpi_write_data(struct sr_scpi_dev_inst *scpi, char *buf, int maxlen)
+{
+ return scpi->write_data(scpi->priv, buf, maxlen);
+}
+
+/**
+ * Read part of a response from SCPI device without mutex.
+ *
+ * @param scpi Previously initialised SCPI device structure.
+ * @param buf Buffer to store result.
+ * @param maxlen Maximum number of bytes to read.
+ *
+ * @return Number of bytes read, or SR_ERR upon failure.
+ */
+static int scpi_read_data(struct sr_scpi_dev_inst *scpi, char *buf, int maxlen)
+{
+ return scpi->read_data(scpi->priv, buf, maxlen);
+}
+
+/**
+ * Do a non-blocking read of up to the allocated length, and
+ * check if a timeout has occured, without mutex.
+ *
+ * @param scpi Previously initialised SCPI device structure.
+ * @param response Buffer to which the response is appended.
+ * @param abs_timeout_us Absolute timeout in microseconds
+ *
+ * @return read length on success, SR_ERR* on failure.
+ */
+static int scpi_read_response(struct sr_scpi_dev_inst *scpi,
+ GString *response, gint64 abs_timeout_us)
+{
+ int len, space;
+
+ space = response->allocated_len - response->len;
+ len = scpi->read_data(scpi->priv, &response->str[response->len], space);
+
+ if (len < 0) {
+ sr_err("Incompletely read SCPI response.");
+ return SR_ERR;
+ }
+
+ if (len > 0) {
+ g_string_set_size(response, response->len + len);
+ return len;
+ }
+
+ if (g_get_monotonic_time() > abs_timeout_us) {
+ sr_err("Timed out waiting for SCPI response.");
+ return SR_ERR_TIMEOUT;
+ }
+
+ return 0;
+}
+
+/**
+ * Send a SCPI command, receive the reply and store the reply in
+ * scpi_response, without mutex.
+ *
+ * @param scpi Previously initialised SCPI device structure.
+ * @param command The SCPI command to send to the device.
+ * @param scpi_response Pointer where to store the SCPI response.
+ *
+ * @return SR_OK on success, SR_ERR on failure.
+ */
+static int scpi_get_data(struct sr_scpi_dev_inst *scpi,
+ const char *command, GString **scpi_response)
+{
+ int ret;
+ GString *response;
+ int space;
+ gint64 timeout;
+
+ /* Optionally send caller provided command. */
+ if (command) {
+ if (scpi_send(scpi, command) != SR_OK)
+ return SR_ERR;
+ }
+
+ /* Initiate SCPI read operation. */
+ if (sr_scpi_read_begin(scpi) != SR_OK)
+ return SR_ERR;
+
+ /* Keep reading until completion or until timeout. */
+ timeout = g_get_monotonic_time() + scpi->read_timeout_us;
+
+ response = *scpi_response;
+
+ while (!sr_scpi_read_complete(scpi)) {
+ /* Resize the buffer when free space drops below a threshold. */
+ space = response->allocated_len - response->len;
+ if (space < 128) {
+ int oldlen = response->len;
+ g_string_set_size(response, oldlen + 1024);
+ g_string_set_size(response, oldlen);
+ }
+
+ /* Read another chunk of the response. */
+ ret = scpi_read_response(scpi, response, timeout);
+
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ timeout = g_get_monotonic_time() + scpi->read_timeout_us;
+ }
+
+ return SR_OK;
+}
+
SR_PRIV GSList *sr_scpi_scan(struct drv_context *drvc, GSList *options,
struct sr_dev_inst *(*probe_device)(struct sr_scpi_dev_inst *scpi))
{
GSList *resources, *l, *devices;
struct sr_dev_inst *sdi;
- const char *resource = NULL;
- const char *serialcomm = NULL;
+ const char *resource, *conn;
+ const char *serialcomm, *comm;
gchar **res;
unsigned i;
- for (l = options; l; l = l->next) {
- struct sr_config *src = l->data;
- switch (src->key) {
- case SR_CONF_CONN:
- resource = g_variant_get_string(src->data, NULL);
- break;
- case SR_CONF_SERIALCOMM:
- serialcomm = g_variant_get_string(src->data, NULL);
- break;
- }
- }
+ resource = NULL;
+ serialcomm = NULL;
+ (void)sr_serial_extract_options(options, &resource, &serialcomm);
devices = NULL;
for (i = 0; i < ARRAY_SIZE(scpi_devs); i++) {
- if ((resource && strcmp(resource, scpi_devs[i]->prefix))
- || !scpi_devs[i]->scan)
+ if (resource && strcmp(resource, scpi_devs[i]->prefix) != 0)
+ continue;
+ if (!scpi_devs[i]->scan)
continue;
resources = scpi_devs[i]->scan(drvc);
for (l = resources; l; l = l->next) {
res = g_strsplit(l->data, ":", 2);
- if (res[0] && (sdi = sr_scpi_scan_resource(drvc, res[0],
- serialcomm ? serialcomm : res[1], probe_device))) {
+ if (!res[0]) {
+ g_strfreev(res);
+ continue;
+ }
+ conn = res[0];
+ comm = serialcomm ? : res[1];
+ sdi = sr_scpi_scan_resource(drvc, conn, comm, probe_device);
+ if (sdi) {
devices = g_slist_append(devices, sdi);
sdi->connection_id = g_strdup(l->data);
}
*/
SR_PRIV int sr_scpi_open(struct sr_scpi_dev_inst *scpi)
{
+ g_mutex_init(&scpi->scpi_mutex);
+
return scpi->open(scpi);
}
+/**
+ * Get the connection ID of the SCPI device.
+ *
+ * Callers must free the allocated memory regardless of the routine's
+ * return code. See @ref g_free().
+ *
+ * @param[in] scpi Previously initialized SCPI device structure.
+ * @param[out] connection_id Pointer where to store the connection ID.
+ *
+ * @return SR_OK on success, SR_ERR on failure.
+ */
+SR_PRIV int sr_scpi_connection_id(struct sr_scpi_dev_inst *scpi,
+ char **connection_id)
+{
+ return scpi->connection_id(scpi, connection_id);
+}
+
/**
* Add an event source for an SCPI device.
*
int ret;
va_start(args, format);
- ret = sr_scpi_send_variadic(scpi, format, args);
+ g_mutex_lock(&scpi->scpi_mutex);
+ ret = scpi_send_variadic(scpi, format, args);
+ g_mutex_unlock(&scpi->scpi_mutex);
va_end(args);
return ret;
SR_PRIV int sr_scpi_send_variadic(struct sr_scpi_dev_inst *scpi,
const char *format, va_list args)
{
- va_list args_copy;
- char *buf;
- int len, ret;
-
- /* Get length of buffer required. */
- va_copy(args_copy, args);
- len = vsnprintf(NULL, 0, format, args_copy);
- va_end(args_copy);
-
- /* Allocate buffer and write out command. */
- buf = g_malloc0(len + 2);
- vsprintf(buf, format, args);
- if (buf[len - 1] != '\n')
- buf[len] = '\n';
-
- /* Send command. */
- ret = scpi->send(scpi->priv, buf);
+ int ret;
- /* Free command buffer. */
- g_free(buf);
+ g_mutex_lock(&scpi->scpi_mutex);
+ ret = scpi_send_variadic(scpi, format, args);
+ g_mutex_unlock(&scpi->scpi_mutex);
return ret;
}
SR_PRIV int sr_scpi_read_data(struct sr_scpi_dev_inst *scpi,
char *buf, int maxlen)
{
- return scpi->read_data(scpi->priv, buf, maxlen);
+ int ret;
+
+ g_mutex_lock(&scpi->scpi_mutex);
+ ret = scpi_read_data(scpi, buf, maxlen);
+ g_mutex_unlock(&scpi->scpi_mutex);
+
+ return ret;
+}
+
+/**
+ * Send data to SCPI device.
+ *
+ * TODO: This is only implemented in TcpRaw, but never used.
+ * TODO: Use Mutex at all?
+ *
+ * @param scpi Previously initialised SCPI device structure.
+ * @param buf Buffer with data to send.
+ * @param len Number of bytes to send.
+ *
+ * @return Number of bytes read, or SR_ERR upon failure.
+ */
+SR_PRIV int sr_scpi_write_data(struct sr_scpi_dev_inst *scpi,
+ char *buf, int maxlen)
+{
+ int ret;
+
+ g_mutex_lock(&scpi->scpi_mutex);
+ ret = scpi_write_data(scpi, buf, maxlen);
+ g_mutex_unlock(&scpi->scpi_mutex);
+
+ return ret;
}
/**
*/
SR_PRIV int sr_scpi_close(struct sr_scpi_dev_inst *scpi)
{
- return scpi->close(scpi);
+ int ret;
+
+ g_mutex_lock(&scpi->scpi_mutex);
+ ret = scpi->close(scpi);
+ g_mutex_unlock(&scpi->scpi_mutex);
+ g_mutex_clear(&scpi->scpi_mutex);
+
+ return ret;
}
/**
scpi->free(scpi->priv);
g_free(scpi->priv);
+ g_free(scpi->actual_channel_name);
g_free(scpi);
}
/**
* Send a SCPI command, receive the reply and store the reply in scpi_response.
*
- * @param scpi Previously initialised SCPI device structure.
- * @param command The SCPI command to send to the device (can be NULL).
- * @param scpi_response Pointer where to store the SCPI response.
+ * Callers must free the allocated memory regardless of the routine's
+ * return code. See @ref g_free().
+ *
+ * @param[in] scpi Previously initialised SCPI device structure.
+ * @param[in] command The SCPI command to send to the device (can be NULL).
+ * @param[out] scpi_response Pointer where to store the SCPI response.
*
* @return SR_OK on success, SR_ERR* on failure.
*/
const char *command, char **scpi_response)
{
GString *response;
- response = g_string_sized_new(1024);
+ *scpi_response = NULL;
+
+ response = g_string_sized_new(1024);
if (sr_scpi_get_data(scpi, command, &response) != SR_OK) {
if (response)
g_string_free(response, TRUE);
SR_PRIV int sr_scpi_read_response(struct sr_scpi_dev_inst *scpi,
GString *response, gint64 abs_timeout_us)
{
- int len, space;
-
- space = response->allocated_len - response->len;
- len = sr_scpi_read_data(scpi, &response->str[response->len], space);
-
- if (len < 0) {
- sr_err("Incompletely read SCPI response.");
- return SR_ERR;
- }
-
- if (len > 0) {
- g_string_set_size(response, response->len + len);
- return len;
- }
+ int ret;
- if (g_get_monotonic_time() > abs_timeout_us) {
- sr_err("Timed out waiting for SCPI response.");
- return SR_ERR_TIMEOUT;
- }
+ g_mutex_lock(&scpi->scpi_mutex);
+ ret = scpi_read_response(scpi, response, abs_timeout_us);
+ g_mutex_unlock(&scpi->scpi_mutex);
- return 0;
+ return ret;
}
SR_PRIV int sr_scpi_get_data(struct sr_scpi_dev_inst *scpi,
const char *command, GString **scpi_response)
{
int ret;
- GString *response;
- int space;
- gint64 timeout;
-
- /* Optionally send caller provided command. */
- if (command) {
- if (sr_scpi_send(scpi, command) != SR_OK)
- return SR_ERR;
- }
-
- /* Initiate SCPI read operation. */
- if (sr_scpi_read_begin(scpi) != SR_OK)
- return SR_ERR;
- /* Keep reading until completion or until timeout. */
- timeout = g_get_monotonic_time() + scpi->read_timeout_us;
-
- response = *scpi_response;
-
- while (!sr_scpi_read_complete(scpi)) {
- /* Resize the buffer when free space drops below a threshold. */
- space = response->allocated_len - response->len;
- if (space < 128) {
- int oldlen = response->len;
- g_string_set_size(response, oldlen + 1024);
- g_string_set_size(response, oldlen);
- }
+ g_mutex_lock(&scpi->scpi_mutex);
+ ret = scpi_get_data(scpi, command, scpi_response);
+ g_mutex_unlock(&scpi->scpi_mutex);
- /* Read another chunk of the response. */
- ret = sr_scpi_read_response(scpi, response, timeout);
-
- if (ret < 0)
- return ret;
- if (ret > 0)
- timeout = g_get_monotonic_time() + scpi->read_timeout_us;
- }
-
- return SR_OK;
+ return ret;
}
/**
const char *command, int *scpi_response)
{
int ret;
+ struct sr_rational ret_rational;
char *response;
response = NULL;
if (ret != SR_OK && !response)
return ret;
- if (sr_atoi(response, scpi_response) == SR_OK)
- ret = SR_OK;
- else
+ ret = sr_parse_rational(response, &ret_rational);
+ if (ret == SR_OK && (ret_rational.p % ret_rational.q) == 0) {
+ *scpi_response = ret_rational.p / ret_rational.q;
+ } else {
+ sr_dbg("get_int: non-integer rational=%" PRId64 "/%" PRIu64,
+ ret_rational.p, ret_rational.q);
ret = SR_ERR_DATA;
+ }
g_free(response);
if (ret != SR_OK && !response)
return ret;
- if (sr_atod(response, scpi_response) == SR_OK)
+ if (sr_atod_ascii(response, scpi_response) == SR_OK)
ret = SR_OK;
else
ret = SR_ERR_DATA;
gboolean opc;
for (i = 0; i < SCPI_READ_RETRIES; i++) {
+ opc = FALSE;
sr_scpi_get_bool(scpi, SCPI_CMD_OPC, &opc);
if (opc)
return SR_OK;
* Send a SCPI command, read the reply, parse it as comma separated list of
* floats and store the as an result in scpi_response.
*
- * @param scpi Previously initialised SCPI device structure.
- * @param command The SCPI command to send to the device (can be NULL).
- * @param scpi_response Pointer where to store the parsed result.
+ * Callers must free the allocated memory (unless it's NULL) regardless of
+ * the routine's return code. See @ref g_array_free().
+ *
+ * @param[in] scpi Previously initialised SCPI device structure.
+ * @param[in] command The SCPI command to send to the device (can be NULL).
+ * @param[out] scpi_response Pointer where to store the parsed result.
*
* @return SR_OK upon successfully parsing all values, SR_ERR* upon a parsing
- * error or upon no response. The allocated response must be freed by
- * the caller in the case of an SR_OK as well as in the case of
- * parsing error.
+ * error or upon no response.
*/
SR_PRIV int sr_scpi_get_floatv(struct sr_scpi_dev_inst *scpi,
const char *command, GArray **scpi_response)
float tmp;
char *response;
gchar **ptr, **tokens;
+ size_t token_count;
GArray *response_array;
- response = NULL;
- tokens = NULL;
+ *scpi_response = NULL;
+ response = NULL;
ret = sr_scpi_get_string(scpi, command, &response);
if (ret != SR_OK && !response)
return ret;
tokens = g_strsplit(response, ",", 0);
- ptr = tokens;
+ token_count = g_strv_length(tokens);
- response_array = g_array_sized_new(TRUE, FALSE, sizeof(float), 256);
+ response_array = g_array_sized_new(TRUE, FALSE,
+ sizeof(float), token_count + 1);
+ ptr = tokens;
while (*ptr) {
- if (sr_atof_ascii(*ptr, &tmp) == SR_OK)
- response_array = g_array_append_val(response_array,
- tmp);
- else
+ ret = sr_atof_ascii(*ptr, &tmp);
+ if (ret != SR_OK) {
ret = SR_ERR_DATA;
-
+ break;
+ }
+ response_array = g_array_append_val(response_array, tmp);
ptr++;
}
g_strfreev(tokens);
if (ret != SR_OK && response_array->len == 0) {
g_array_free(response_array, TRUE);
- *scpi_response = NULL;
return SR_ERR_DATA;
}
* Send a SCPI command, read the reply, parse it as comma separated list of
* unsigned 8 bit integers and store the as an result in scpi_response.
*
- * @param scpi Previously initialised SCPI device structure.
- * @param command The SCPI command to send to the device (can be NULL).
- * @param scpi_response Pointer where to store the parsed result.
+ * Callers must free the allocated memory (unless it's NULL) regardless of
+ * the routine's return code. See @ref g_array_free().
+ *
+ * @param[in] scpi Previously initialised SCPI device structure.
+ * @param[in] command The SCPI command to send to the device (can be NULL).
+ * @param[out] scpi_response Pointer where to store the parsed result.
*
* @return SR_OK upon successfully parsing all values, SR_ERR* upon a parsing
- * error or upon no response. The allocated response must be freed by
- * the caller in the case of an SR_OK as well as in the case of
- * parsing error.
+ * error or upon no response.
*/
SR_PRIV int sr_scpi_get_uint8v(struct sr_scpi_dev_inst *scpi,
const char *command, GArray **scpi_response)
int tmp, ret;
char *response;
gchar **ptr, **tokens;
+ size_t token_count;
GArray *response_array;
- response = NULL;
- tokens = NULL;
+ *scpi_response = NULL;
+ response = NULL;
ret = sr_scpi_get_string(scpi, command, &response);
if (ret != SR_OK && !response)
return ret;
tokens = g_strsplit(response, ",", 0);
- ptr = tokens;
+ token_count = g_strv_length(tokens);
- response_array = g_array_sized_new(TRUE, FALSE, sizeof(uint8_t), 256);
+ response_array = g_array_sized_new(TRUE, FALSE,
+ sizeof(uint8_t), token_count + 1);
+ ptr = tokens;
while (*ptr) {
- if (sr_atoi(*ptr, &tmp) == SR_OK)
- response_array = g_array_append_val(response_array,
- tmp);
- else
+ ret = sr_atoi(*ptr, &tmp);
+ if (ret != SR_OK) {
ret = SR_ERR_DATA;
-
+ break;
+ }
+ response_array = g_array_append_val(response_array, tmp);
ptr++;
}
g_strfreev(tokens);
if (response_array->len == 0) {
g_array_free(response_array, TRUE);
- *scpi_response = NULL;
return SR_ERR_DATA;
}
* Send a SCPI command, read the reply, parse it as binary data with a
* "definite length block" header and store the as an result in scpi_response.
*
- * @param scpi Previously initialised SCPI device structure.
- * @param command The SCPI command to send to the device (can be NULL).
- * @param scpi_response Pointer where to store the parsed result.
+ * Callers must free the allocated memory (unless it's NULL) regardless of
+ * the routine's return code. See @ref g_byte_array_free().
+ *
+ * @param[in] scpi Previously initialised SCPI device structure.
+ * @param[in] command The SCPI command to send to the device (can be NULL).
+ * @param[out] scpi_response Pointer where to store the parsed result.
*
* @return SR_OK upon successfully parsing all values, SR_ERR* upon a parsing
- * error or upon no response. The allocated response must be freed by
- * the caller in the case of an SR_OK as well as in the case of
- * parsing error.
+ * error or upon no response.
*/
SR_PRIV int sr_scpi_get_block(struct sr_scpi_dev_inst *scpi,
const char *command, GByteArray **scpi_response)
{
int ret;
GString* response;
+ gsize oldlen;
char buf[10];
long llen;
long datalen;
gint64 timeout;
+ *scpi_response = NULL;
+
+ g_mutex_lock(&scpi->scpi_mutex);
+
if (command)
- if (sr_scpi_send(scpi, command) != SR_OK)
+ if (scpi_send(scpi, command) != SR_OK) {
+ g_mutex_unlock(&scpi->scpi_mutex);
return SR_ERR;
+ }
- if (sr_scpi_read_begin(scpi) != SR_OK)
+ if (sr_scpi_read_begin(scpi) != SR_OK) {
+ g_mutex_unlock(&scpi->scpi_mutex);
return SR_ERR;
+ }
/*
* Assume an initial maximum length, optionally gets adjusted below.
timeout = g_get_monotonic_time() + scpi->read_timeout_us;
- *scpi_response = NULL;
-
/* Get (the first chunk of) the response. */
- while (response->len < 2) {
- ret = sr_scpi_read_response(scpi, response, timeout);
+ do {
+ ret = scpi_read_response(scpi, response, timeout);
if (ret < 0) {
+ g_mutex_unlock(&scpi->scpi_mutex);
g_string_free(response, TRUE);
return ret;
}
- }
+ } while (response->len < 2);
/*
* SCPI protocol data blocks are preceeded with a length spec.
* the input buffer, leaving just the data bytes.
*/
if (response->str[0] != '#') {
+ g_mutex_unlock(&scpi->scpi_mutex);
g_string_free(response, TRUE);
return SR_ERR_DATA;
}
buf[1] = '\0';
ret = sr_atol(buf, &llen);
if ((ret != SR_OK) || (llen == 0)) {
+ g_mutex_unlock(&scpi->scpi_mutex);
g_string_free(response, TRUE);
return ret;
}
while (response->len < (unsigned long)(2 + llen)) {
- ret = sr_scpi_read_response(scpi, response, timeout);
+ ret = scpi_read_response(scpi, response, timeout);
if (ret < 0) {
+ g_mutex_unlock(&scpi->scpi_mutex);
g_string_free(response, TRUE);
return ret;
}
buf[llen] = '\0';
ret = sr_atol(buf, &datalen);
if ((ret != SR_OK) || (datalen == 0)) {
+ g_mutex_unlock(&scpi->scpi_mutex);
g_string_free(response, TRUE);
return ret;
}
g_string_erase(response, 0, 2 + llen);
/*
- * If the initially assumed length does not cover the data block
- * length, then re-allocate the buffer size to the now known
- * length, and keep reading more chunks of response data.
+ * Re-allocate the buffer size to the now known length
+ * and keep reading more chunks of response data.
*/
- if (response->len < (unsigned long)(datalen)) {
- int oldlen = response->len;
- g_string_set_size(response, datalen);
- g_string_set_size(response, oldlen);
+ oldlen = response->len;
+ g_string_set_size(response, datalen);
+ g_string_set_size(response, oldlen);
+
+ if (oldlen < (unsigned long)(datalen)) {
+ do {
+ oldlen = response->len;
+ ret = scpi_read_response(scpi, response, timeout);
+
+ /* On timeout truncate the buffer and send the partial response
+ * instead of getting stuck on timeouts...
+ */
+ if (ret == SR_ERR_TIMEOUT) {
+ datalen = oldlen;
+ break;
+ }
+ if (ret < 0) {
+ g_mutex_unlock(&scpi->scpi_mutex);
+ g_string_free(response, TRUE);
+ return ret;
+ }
+ if (ret > 0)
+ timeout = g_get_monotonic_time() + scpi->read_timeout_us;
+ } while (response->len < (unsigned long)(datalen));
}
- while (response->len < (unsigned long)(datalen)) {
- ret = sr_scpi_read_response(scpi, response, timeout);
- if (ret < 0) {
- g_string_free(response, TRUE);
- return ret;
- }
- if (ret > 0)
- timeout = g_get_monotonic_time() + scpi->read_timeout_us;
- }
+ g_mutex_unlock(&scpi->scpi_mutex);
/* Convert received data to byte array. */
*scpi_response = g_byte_array_new_take(
* Send the *IDN? SCPI command, receive the reply, parse it and store the
* reply as a sr_scpi_hw_info structure in the supplied scpi_response pointer.
*
- * The hw_info structure must be freed by the caller via sr_scpi_hw_info_free().
+ * Callers must free the allocated memory regardless of the routine's
+ * return code. See @ref sr_scpi_hw_info_free().
*
- * @param scpi Previously initialised SCPI device structure.
- * @param scpi_response Pointer where to store the hw_info structure.
+ * @param[in] scpi Previously initialised SCPI device structure.
+ * @param[out] scpi_response Pointer where to store the hw_info structure.
*
* @return SR_OK upon success, SR_ERR* on failure.
*/
char *response;
gchar **tokens;
struct sr_scpi_hw_info *hw_info;
+ gchar *idn_substr;
+ *scpi_response = NULL;
response = NULL;
tokens = NULL;
if (ret != SR_OK && !response)
return ret;
- sr_info("Got IDN string: '%s'", response);
-
/*
* The response to a '*IDN?' is specified by the SCPI spec. It contains
* a comma-separated list containing the manufacturer name, instrument
* model, serial number of the instrument and the firmware version.
+ *
+ * BEWARE! Although strictly speaking a smaller field count is invalid,
+ * this implementation also accepts IDN responses with one field less,
+ * and assumes that the serial number is missing. Some GWInstek DMMs
+ * were found to do this. Keep warning about this condition, which may
+ * need more consideration later.
*/
tokens = g_strsplit(response, ",", 0);
-
- for (num_tokens = 0; tokens[num_tokens] != NULL; num_tokens++);
-
- if (num_tokens < 4) {
- sr_dbg("IDN response not according to spec: %80.s.", response);
+ num_tokens = g_strv_length(tokens);
+ if (num_tokens < 3) {
+ sr_dbg("IDN response not according to spec: '%s'", response);
g_strfreev(tokens);
g_free(response);
return SR_ERR_DATA;
}
+ if (num_tokens < 4) {
+ sr_warn("Short IDN response, assume missing serial number.");
+ }
g_free(response);
- hw_info = g_malloc0(sizeof(struct sr_scpi_hw_info));
- hw_info->manufacturer = g_strstrip(g_strdup(tokens[0]));
+ hw_info = g_malloc0(sizeof(*hw_info));
+
+ idn_substr = g_strstr_len(tokens[0], -1, "IDN ");
+ if (idn_substr == NULL)
+ hw_info->manufacturer = g_strstrip(g_strdup(tokens[0]));
+ else
+ hw_info->manufacturer = g_strstrip(g_strdup(idn_substr + 4));
+
hw_info->model = g_strstrip(g_strdup(tokens[1]));
- hw_info->serial_number = g_strstrip(g_strdup(tokens[2]));
- hw_info->firmware_version = g_strstrip(g_strdup(tokens[3]));
+ if (num_tokens < 4) {
+ hw_info->serial_number = g_strdup("Unknown");
+ hw_info->firmware_version = g_strstrip(g_strdup(tokens[2]));
+ } else {
+ hw_info->serial_number = g_strstrip(g_strdup(tokens[2]));
+ hw_info->firmware_version = g_strstrip(g_strdup(tokens[3]));
+ }
g_strfreev(tokens);
g_free(hw_info->firmware_version);
g_free(hw_info);
}
+
+/**
+ * Remove potentially enclosing pairs of quotes, un-escape content.
+ * This implementation modifies the caller's buffer when quotes are found
+ * and doubled quote characters need to get removed from the content.
+ *
+ * @param[in, out] s The SCPI string to check and un-quote.
+ *
+ * @return The start of the un-quoted string.
+ */
+SR_PRIV const char *sr_scpi_unquote_string(char *s)
+{
+ size_t s_len;
+ char quotes[3];
+ char *rdptr;
+
+ /* Immediately bail out on invalid or short input. */
+ if (!s || !*s)
+ return s;
+ s_len = strlen(s);
+ if (s_len < 2)
+ return s;
+
+ /* Check for matching quote characters front and back. */
+ if (s[0] != '\'' && s[0] != '"')
+ return s;
+ if (s[0] != s[s_len - 1])
+ return s;
+
+ /* Need to strip quotes, and un-double quote chars inside. */
+ quotes[0] = quotes[1] = *s;
+ quotes[2] = '\0';
+ s[s_len - 1] = '\0';
+ s++;
+ rdptr = s;
+ while ((rdptr = strstr(rdptr, quotes)) != NULL) {
+ memmove(rdptr, rdptr + 1, strlen(rdptr));
+ rdptr++;
+ }
+
+ return s;
+}
+
+SR_PRIV const char *sr_vendor_alias(const char *raw_vendor)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(scpi_vendors); i++) {
+ if (!g_ascii_strcasecmp(raw_vendor, scpi_vendors[i][0]))
+ return scpi_vendors[i][1];
+ }
+
+ return raw_vendor;
+}
+
+SR_PRIV const char *sr_scpi_cmd_get(const struct scpi_command *cmdtable,
+ int command)
+{
+ unsigned int i;
+ const char *cmd;
+
+ if (!cmdtable)
+ return NULL;
+
+ cmd = NULL;
+ for (i = 0; cmdtable[i].string; i++) {
+ if (cmdtable[i].command == command) {
+ cmd = cmdtable[i].string;
+ break;
+ }
+ }
+
+ return cmd;
+}
+
+SR_PRIV int sr_scpi_cmd(const struct sr_dev_inst *sdi,
+ const struct scpi_command *cmdtable,
+ int channel_command, const char *channel_name,
+ int command, ...)
+{
+ struct sr_scpi_dev_inst *scpi;
+ va_list args;
+ int ret;
+ const char *channel_cmd;
+ const char *cmd;
+
+ scpi = sdi->conn;
+
+ if (!(cmd = sr_scpi_cmd_get(cmdtable, command))) {
+ /* Device does not implement this command, that's OK. */
+ return SR_OK;
+ }
+
+ g_mutex_lock(&scpi->scpi_mutex);
+
+ /* Select channel. */
+ channel_cmd = sr_scpi_cmd_get(cmdtable, channel_command);
+ if (channel_cmd && channel_name &&
+ g_strcmp0(channel_name, scpi->actual_channel_name)) {
+ sr_spew("sr_scpi_cmd(): new channel = %s", channel_name);
+ g_free(scpi->actual_channel_name);
+ scpi->actual_channel_name = g_strdup(channel_name);
+ ret = scpi_send(scpi, channel_cmd, channel_name);
+ if (ret != SR_OK)
+ return ret;
+ }
+
+ va_start(args, command);
+ ret = scpi_send_variadic(scpi, cmd, args);
+ va_end(args);
+
+ g_mutex_unlock(&scpi->scpi_mutex);
+
+ return ret;
+}
+
+SR_PRIV int sr_scpi_cmd_resp(const struct sr_dev_inst *sdi,
+ const struct scpi_command *cmdtable,
+ int channel_command, const char *channel_name,
+ GVariant **gvar, const GVariantType *gvtype, int command, ...)
+{
+ struct sr_scpi_dev_inst *scpi;
+ va_list args;
+ const char *channel_cmd;
+ const char *cmd;
+ GString *response;
+ char *s;
+ gboolean b;
+ double d;
+ int ret;
+
+ scpi = sdi->conn;
+
+ if (!(cmd = sr_scpi_cmd_get(cmdtable, command))) {
+ /* Device does not implement this command. */
+ return SR_ERR_NA;
+ }
+
+ g_mutex_lock(&scpi->scpi_mutex);
+
+ /* Select channel. */
+ channel_cmd = sr_scpi_cmd_get(cmdtable, channel_command);
+ if (channel_cmd && channel_name &&
+ g_strcmp0(channel_name, scpi->actual_channel_name)) {
+ sr_spew("sr_scpi_cmd_get(): new channel = %s", channel_name);
+ g_free(scpi->actual_channel_name);
+ scpi->actual_channel_name = g_strdup(channel_name);
+ ret = scpi_send(scpi, channel_cmd, channel_name);
+ if (ret != SR_OK)
+ return ret;
+ }
+
+ va_start(args, command);
+ ret = scpi_send_variadic(scpi, cmd, args);
+ va_end(args);
+ if (ret != SR_OK) {
+ g_mutex_unlock(&scpi->scpi_mutex);
+ return ret;
+ }
+
+ response = g_string_sized_new(1024);
+ ret = scpi_get_data(scpi, NULL, &response);
+ if (ret != SR_OK) {
+ g_mutex_unlock(&scpi->scpi_mutex);
+ if (response)
+ g_string_free(response, TRUE);
+ return ret;
+ }
+
+ g_mutex_unlock(&scpi->scpi_mutex);
+
+ /* Get rid of trailing linefeed if present */
+ if (response->len >= 1 && response->str[response->len - 1] == '\n')
+ g_string_truncate(response, response->len - 1);
+
+ /* Get rid of trailing carriage return if present */
+ if (response->len >= 1 && response->str[response->len - 1] == '\r')
+ g_string_truncate(response, response->len - 1);
+
+ s = g_string_free(response, FALSE);
+
+ ret = SR_OK;
+ if (g_variant_type_equal(gvtype, G_VARIANT_TYPE_BOOLEAN)) {
+ if ((ret = parse_strict_bool(s, &b)) == SR_OK)
+ *gvar = g_variant_new_boolean(b);
+ } else if (g_variant_type_equal(gvtype, G_VARIANT_TYPE_DOUBLE)) {
+ if ((ret = sr_atod_ascii(s, &d)) == SR_OK)
+ *gvar = g_variant_new_double(d);
+ } else if (g_variant_type_equal(gvtype, G_VARIANT_TYPE_STRING)) {
+ *gvar = g_variant_new_string(s);
+ } else {
+ sr_err("Unable to convert to desired GVariant type.");
+ ret = SR_ERR_NA;
+ }
+
+ g_free(s);
+
+ return ret;
+}