Remove some unneeded double-spaces.

[libsigrok.git] / src / hardware / maynuo-m97 / api.c

diff --git a/src/hardware/maynuo-m97/api.c b/src/hardware/maynuo-m97/api.c
index 682254315429732f14697e59b38369e03ce0fdb4..3ded72e9f49acabacc825dcff98bbb024dc2c9d3 100644 (file)
--- a/src/hardware/maynuo-m97/api.c
+++ b/src/hardware/maynuo-m97/api.c
@@ -53,9 +53,11 @@ static const uint32_t devopts_cg[] = {
        SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET,
 };
 
-/* The IDs in this list are only guessed and needs to be verified
-   against some real hardware. If at least a few of them matches,
-   it will probably be safe to enable the others. */
+/*
+ * The IDs in this list are only guessed and needs to be verified
+ * against some real hardware. If at least a few of them matches,
+ * it will probably be safe to enable the others.
+ */
 static const struct maynuo_m97_model supported_models[] = {
 //     {  53, "M9711"     ,   30, 150,    150 },
 //     {  54, "M9712"     ,   30, 150,    300 },
@@ -170,12 +172,12 @@ static int config_compare(gconstpointer a, gconstpointer b)
 static GSList *scan(struct sr_dev_driver *di, GSList *options)
 {
        struct sr_config default_serialcomm = {
-           .key = SR_CONF_SERIALCOMM,
-           .data = g_variant_new_string("9600/8n1"),
+               .key = SR_CONF_SERIALCOMM,
+               .data = g_variant_new_string("9600/8n1"),
        };
        struct sr_config default_modbusaddr = {
-           .key = SR_CONF_MODBUSADDR,
-           .data = g_variant_new_uint64(1),
+               .key = SR_CONF_MODBUSADDR,
+               .data = g_variant_new_uint64(1),
        };
        GSList *opts = options, *devices;
 
@@ -224,8 +226,7 @@ static int dev_close(struct sr_dev_inst *sdi)
                        /* Wait for the last data that was requested from the device. */
                        uint16_t registers[devc->expecting_registers];
                        sr_modbus_read_holding_registers(modbus, -1,
-                                                        devc->expecting_registers,
-                                                        registers);
+                               devc->expecting_registers, registers);
                }
 
                maynuo_m97_set_bit(modbus, PC1, 0);