--- /dev/null
+/*
+ * This file is part of the libsigrok project.
+ *
+ * Copyright (C) 2015 Tilman Sauerbeck <tilman@code-monkey.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef LIBSIGROK_HARDWARE_LECROY_LOGICSTUDIO_PROTOCOL_H
+#define LIBSIGROK_HARDWARE_LECROY_LOGICSTUDIO_PROTOCOL_H
+
+#include <stdint.h>
+#include <glib.h>
+#include <libsigrok/libsigrok.h>
+#include "libsigrok-internal.h"
+
+#define LOG_PREFIX "lecroy-logicstudio"
+
+#define SAMPLE_BUF_SIZE 40960u
+#define CONV_8TO16_BUF_SIZE 8192
+#define INTR_BUF_SIZE 32
+
+struct samplerate_info;
+
+/** Private, per-device-instance driver context. */
+struct dev_context {
+ struct libusb_transfer *intr_xfer;
+ struct libusb_transfer *bulk_xfer;
+
+ const struct samplerate_info *samplerate_info;
+
+ /**
+ * When the device is opened, this will point at a buffer
+ * of SAMPLE_BUF_SIZE bytes.
+ */
+ uint8_t *fetched_samples;
+
+ /**
+ * Used to convert 8 bit samples (8 channels) to 16 bit samples
+ * (16 channels), thus only used in 8 channel mode.
+ * Holds CONV_8TO16_BUF_SIZE bytes.
+ */
+ uint16_t *conv8to16;
+
+ int64_t fw_updated; /* Time of last FX2 firmware upload. */
+
+ /** The pre-trigger capture ratio in percent. */
+ uint64_t capture_ratio;
+
+ uint64_t earliest_sample;
+ uint64_t trigger_sample;
+
+ /** The number of eight-channel groups enabled (either 1 or 2). */
+ uint32_t num_enabled_channel_groups;
+
+ /**
+ * The number of samples to acquire (in thousands).
+ * This is not customizable, but depending on the number
+ * of enabled channel groups.
+ */
+ uint32_t num_thousand_samples;
+
+ uint32_t total_received_sample_bytes;
+
+ /** Mask of enabled channels. */
+ uint16_t channel_mask;
+
+ uint16_t acquisition_id;
+
+ gboolean want_trigger;
+ gboolean abort_acquisition;
+
+ /**
+ * These two magic values are required in order to fix a sample
+ * buffer corruption. Before the first acquisition is run, they
+ * need to be set to 0.
+ */
+ uint8_t magic_arm_trigger;
+ uint8_t magic_fetch_samples;
+
+ /**
+ * Buffer for interrupt transfers (acquisition state notifications).
+ */
+ uint8_t intr_buf[INTR_BUF_SIZE];
+};
+
+SR_PRIV void lls_update_channel_mask(const struct sr_dev_inst *sdi);
+
+SR_PRIV int lls_set_samplerate(const struct sr_dev_inst *sdi, uint64_t samplerate);
+SR_PRIV uint64_t lls_get_samplerate(const struct sr_dev_inst *sdi);
+
+SR_PRIV int lls_setup_acquisition(const struct sr_dev_inst *sdi);
+SR_PRIV int lls_start_acquisition(const struct sr_dev_inst *sdi);
+SR_PRIV int lls_stop_acquisition(const struct sr_dev_inst *sdi);
+
+#endif