SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
};
+/* Voltage and current ranges. Values are: Min, max, step. */
+static const double volts_30[] = { 0, 31, 0.01, };
+static const double volts_60[] = { 0, 61, 0.01, };
+static const double amps_3[] = { 0, 3.1, 0.001, };
+static const double amps_5[] = { 0, 5.1, 0.001, };
+
static const struct korad_kaxxxxp_model models[] = {
- /* Device enum, vendor, model, ID reply, channels, voltage, current */
- {VELLEMAN_PS3005D, "Velleman", "PS3005D",
- "VELLEMANPS3005DV2.0", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {VELLEMAN_LABPS3005D, "Velleman", "LABPS3005D",
- "VELLEMANLABPS3005DV2.0", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {KORAD_KA3005P, "Korad", "KA3005P",
- "KORADKA3005PV2.0", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- /* Sometimes the KA3005P has an extra 0x01 after the ID. */
- {KORAD_KA3005P_0X01, "Korad", "KA3005P",
- "KORADKA3005PV2.0\x01", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- /* Sometimes the KA3005P has an extra 0xBC after the ID. */
- {KORAD_KA3005P_0XBC, "Korad", "KA3005P",
- "KORADKA3005PV2.0\xBC", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {KORAD_KA3005P_V42, "Korad", "KA3005P",
- "KORAD KA3005P V4.2", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {KORAD_KA3005P_V55, "Korad", "KA3005P",
- "KORAD KA3005P V5.5", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {KORAD_KD3005P, "Korad", "KD3005P",
- "KORAD KD3005P V2.0", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {KORAD_KD3005P_V20_NOSP, "Korad", "KD3005P",
- "KORADKD3005PV2.0", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {KORAD_KD3005P_V21_NOSP, "Korad", "KD3005P",
- "KORADKD3005PV2.1", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {RND_320_KD3005P, "RND", "KD3005P",
- "RND 320-KD3005P V4.2", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {RND_320_KA3005P, "RND", "KA3005P",
- "RND 320-KA3005P V5.5", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {RND_320K30PV, "RND", "KA3005P",
- "RND 320-KA3005P V2.0", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {TENMA_72_2550_V2, "Tenma", "72-2550",
- "TENMA72-2550V2.0", 1, {0, 61, 0.01}, {0, 3.1, 0.001}},
- {TENMA_72_2540_V20, "Tenma", "72-2540",
- "TENMA72-2540V2.0", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {TENMA_72_2540_V21, "Tenma", "72-2540",
- "TENMA 72-2540 V2.1", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {TENMA_72_2540_V52, "Tenma", "72-2540",
- "TENMA 72-2540 V5.2", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {TENMA_72_2535_V21, "Tenma", "72-2535",
- "TENMA 72-2535 V2.1", 1, {0, 31, 0.01}, {0, 3.1, 0.001}},
- {TENMA_72_2710_V66, "Tenma", "72-2710",
- "TENMA 72-2710 V6.6", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {STAMOS_SLS31_V20, "Stamos Soldering", "S-LS-31",
- "S-LS-31 V2.0", 1, {0, 31, 0.01}, {0, 5.1, 0.001}},
- {KORAD_KD6005P, "Korad", "KD6005P",
- "KORAD KD6005P V2.2", 1, {0, 61, 0.01}, {0, 5.1, 0.001}},
+ /* Vendor, model name, ID reply, channels, voltage, current, quirks. */
+ {"Korad", "KA3005P", "KORADKA3005PV2.0",
+ 1, volts_30, amps_5, KORAD_QUIRK_ID_TRAILING},
+ /* Some KA3005P have extra bytes after the ID text. */
+ {"Korad", "KA3005P", "KORADKA3005PV2.0\x01", 1, volts_30, amps_5, 0},
+ {"Korad", "KA3005P", "KORADKA3005PV2.0\xBC", 1, volts_30, amps_5, 0},
+ {"Korad", "KA3005P", "KORAD KA3005P V4.2", 1, volts_30, amps_5, 0},
+ {"Korad", "KA3005P", "KORAD KA3005P V5.5", 1, volts_30, amps_5, 0},
+ {"Korad", "KD3005P", "KORAD KD3005P V2.0", 1, volts_30, amps_5, 0},
+ {"Korad", "KD3005P", "KORADKD3005PV2.0", 1, volts_30, amps_5, 0},
+ {"Korad", "KD3005P", "KORADKD3005PV2.1", 1, volts_30, amps_5, 0},
+ {"Korad", "KD3005P", "KORAD KD3005P V4.1", 1, volts_30, amps_5, 0},
+ {"Korad", "KD3005P", "KORAD KD3005P V6.8", 1, volts_30, amps_5, 0},
+ {"Korad", "KD6005P", "KORAD KD6005P V2.2", 1, volts_60, amps_5, 0},
+ {"RND", "KA3005P", "RND 320-KA3005P V5.5", 1, volts_30, amps_5, 0},
+ {"RND", "KD3005P", "RND 320-KD3005P V4.2", 1, volts_30, amps_5, 0},
+ {"RND", "KA3005P", "RND 320-KA3005P V2.0", 1, volts_30, amps_5, 0},
+ {"Stamos Soldering", "S-LS-31", "S-LS-31 V2.0",
+ 1, volts_30, amps_5, KORAD_QUIRK_ID_NO_VENDOR},
+ {"Tenma", "72-2535", "TENMA 72-2535 V2.1", 1, volts_30, amps_3, 0},
+ {"Tenma", "72-2540", "TENMA72-2540V2.0", 1, volts_30, amps_5, 0},
+ {"Tenma", "72-2540", "TENMA 72-2540 V2.1", 1, volts_30, amps_5, 0},
+ {"Tenma", "72-2540", "TENMA 72-2540 V5.2", 1, volts_30, amps_5, 0},
+ {"Tenma", "72-2550", "TENMA72-2550V2.0", 1, volts_60, amps_3, 0},
+ {"Tenma", "72-2710", "TENMA 72-2710 V6.6", 1, volts_30, amps_5, 0},
+ {"Velleman", "LABPS3005D", "VELLEMANLABPS3005DV2.0",
+ 1, volts_30, amps_5, KORAD_QUIRK_LABPS_OVP_EN},
+ {"Velleman", "PS3005D", "VELLEMANPS3005DV2.0",
+ 1, volts_30, amps_5, 0},
ALL_ZERO
};
+/*
+ * Bump this when adding new models[] above. Make sure the text buffer
+ * for the ID response can hold the longest sequence that we expect in
+ * the field which consists of: vendor + model [ + version ][ + serno ].
+ * Don't be too generous here, the maximum receive buffer size affects
+ * the timeout within which the first response character is expected.
+ */
+static const size_t id_text_buffer_size = 48;
+
+/*
+ * Check whether the device's "*IDN?" response matches a supported model.
+ * The caller already stripped off the optional serial number.
+ */
+static gboolean model_matches(const struct korad_kaxxxxp_model *model,
+ const char *id_text)
+{
+ /* TODO Implement more versatile ID response text checks. */
+ return g_strcmp0(model->id, id_text) == 0;
+}
+
static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
static const char *serno_prefix = " SN:";
const char *conn, *serialcomm;
const char *force_detect;
struct sr_serial_dev_inst *serial;
+ size_t i;
char reply[50];
- int ret, i, model_id;
+ int ret;
+ const struct korad_kaxxxxp_model *model;
size_t len;
char *serno;
if (serial_open(serial, SERIAL_RDWR) != SR_OK)
return NULL;
- /*
- * Prepare a receive buffer for the identification response that
- * is large enough to hold the longest known model name, and an
- * optional serial number. Communicate the identification request.
- */
- len = 0;
- for (i = 0; models[i].id; i++) {
- if (len < strlen(models[i].id))
- len = strlen(models[i].id);
- }
- len += strlen(serno_prefix) + 12;
+ /* Communicate the identification request. */
+ len = id_text_buffer_size;
if (len > sizeof(reply) - 1)
len = sizeof(reply) - 1;
sr_dbg("Want max %zu bytes.", len);
serno += strlen(serno_prefix);
}
- model_id = -1;
+ model = NULL;
for (i = 0; models[i].id; i++) {
- if (g_strcmp0(models[i].id, reply) != 0)
+ if (!model_matches(&models[i], reply))
continue;
- model_id = i;
+ model = &models[i];
break;
}
- if (model_id < 0 && force_detect) {
+ if (!model && force_detect) {
sr_warn("Found model ID '%s' is unknown, trying '%s' spec.",
reply, force_detect);
for (i = 0; models[i].id; i++) {
- if (strcmp(models[i].id, force_detect) != 0)
+ if (!model_matches(&models[i], force_detect))
continue;
sr_info("Found replacement, using it instead.");
- model_id = i;
+ model = &models[i];
break;
}
}
- if (model_id < 0) {
+ if (!model) {
sr_err("Unknown model ID '%s' detected, aborting.", reply);
return NULL;
}
- sr_dbg("Found: %s %s (idx %d, ID '%s').", models[model_id].vendor,
- models[model_id].name, model_id, models[model_id].id);
+ sr_dbg("Found: %s %s (idx %zu, ID '%s').", model->vendor, model->name,
+ model - &models[0], model->id);
sdi = g_malloc0(sizeof(struct sr_dev_inst));
sdi->status = SR_ST_INACTIVE;
- sdi->vendor = g_strdup(models[model_id].vendor);
- sdi->model = g_strdup(models[model_id].name);
+ sdi->vendor = g_strdup(model->vendor);
+ sdi->model = g_strdup(model->name);
if (serno)
sdi->serial_num = g_strdup(serno);
sdi->inst_type = SR_INST_SERIAL;
devc = g_malloc0(sizeof(struct dev_context));
sr_sw_limits_init(&devc->limits);
g_mutex_init(&devc->rw_mutex);
- devc->model = &models[model_id];
+ devc->model = model;
devc->req_sent_at = 0;
devc->cc_mode_1_changed = FALSE;
devc->cc_mode_2_changed = FALSE;