/** Status/error codes returned by libsigrok functions. */
enum {
- SR_OK = 0, /**< No error. */
- SR_ERR = -1, /**< Generic/unspecified error. */
- SR_ERR_MALLOC = -2, /**< Malloc/calloc/realloc error. */
- SR_ERR_ARG = -3, /**< Function argument error. */
- SR_ERR_BUG = -4, /**< Errors hinting at internal bugs. */
- SR_ERR_SAMPLERATE = -5, /**< Incorrect samplerate. */
- SR_ERR_NA = -6, /**< Not applicable. */
- SR_ERR_DEV_CLOSED = -7, /**< Device is closed, but needs to be open. */
- SR_ERR_TIMEOUT = -8, /**< A timeout occurred. */
- SR_ERR_PROBE_GROUP= -9, /**< A probe group must be specified. */
+ SR_OK = 0, /**< No error. */
+ SR_ERR = -1, /**< Generic/unspecified error. */
+ SR_ERR_MALLOC = -2, /**< Malloc/calloc/realloc error. */
+ SR_ERR_ARG = -3, /**< Function argument error. */
+ SR_ERR_BUG = -4, /**< Errors hinting at internal bugs. */
+ SR_ERR_SAMPLERATE = -5, /**< Incorrect samplerate. */
+ SR_ERR_NA = -6, /**< Not applicable. */
+ SR_ERR_DEV_CLOSED = -7, /**< Device is closed, but must be open. */
+ SR_ERR_TIMEOUT = -8, /**< A timeout occurred. */
+ SR_ERR_CHANNEL_GROUP = -9, /**< A channel group must be specified. */
/*
* Note: When adding entries here, don't forget to also update the
*/
};
-#define SR_MAX_PROBENAME_LEN 32
+#define SR_MAX_CHANNELNAME_LEN 32
/* Handy little macros */
#define SR_HZ(n) (n)
#define SR_HZ_TO_NS(n) ((uint64_t)(1000000000ULL) / (n))
/** libsigrok loglevels. */
-enum {
+enum sr_loglevel {
SR_LOG_NONE = 0, /**< Output no messages at all. */
SR_LOG_ERR = 1, /**< Output error messages. */
SR_LOG_WARN = 2, /**< Output warnings. */
#endif
/** Type definition for callback function for data reception. */
-typedef int (*sr_receive_data_callback_t)(int fd, int revents, void *cb_data);
+typedef int (*sr_receive_data_callback)(int fd, int revents, void *cb_data);
/** Data types used by sr_config_info(). */
-enum {
+enum sr_datatype {
SR_T_UINT64 = 10000,
SR_T_CHAR,
SR_T_BOOL,
};
/** Value for sr_datafeed_packet.type. */
-enum {
+enum sr_packettype {
/** Payload is sr_datafeed_header. */
SR_DF_HEADER = 10000,
/** End of stream (no further data). */
};
/** Measured quantity, sr_datafeed_analog.mq. */
-enum {
+enum sr_mq {
SR_MQ_VOLTAGE = 10000,
SR_MQ_CURRENT,
SR_MQ_RESISTANCE,
};
/** Unit of measured quantity, sr_datafeed_analog.unit. */
-enum {
+enum sr_unit {
/** Volt */
SR_UNIT_VOLT = 10000,
/** Ampere (current). */
};
/** Values for sr_datafeed_analog.flags. */
-enum {
+enum sr_mqflag {
/** Voltage measurement is alternating current (AC). */
SR_MQFLAG_AC = 0x01,
/** Voltage measurement is direct current (DC). */
/** Analog datafeed payload for type SR_DF_ANALOG. */
struct sr_datafeed_analog {
- /** The probes for which data is included in this packet. */
- GSList *probes;
+ /** The channels for which data is included in this packet. */
+ GSList *channels;
/** Number of samples in data */
int num_samples;
/** Measured quantity (voltage, current, temperature, and so on).
/** Bitmap with extra information about the MQ. Use SR_MQFLAG_AC, ... */
uint64_t mqflags;
/** The analog value(s). The data is interleaved according to
- * the probes list. */
+ * the channels list. */
float *data;
};
/** Output (file) format struct. */
struct sr_output {
- /**
- * A pointer to this output format's 'struct sr_output_format'.
- * The frontend can use this to call the module's callbacks.
- */
+ /** A pointer to this output's format. */
struct sr_output_format *format;
/**
* The device for which this output module is creating output. This
- * can be used by the module to find out probe names and numbers.
+ * can be used by the module to find out channel names and numbers.
*/
- struct sr_dev_inst *sdi;
+ const struct sr_dev_inst *sdi;
/**
* An optional parameter which the frontend can pass in to the
* output module. How the string is interpreted is entirely up to
* the module.
*/
- char *param;
+ GHashTable *params;
/**
* A generic pointer which can be used by the module to keep internal
*/
char *description;
- /** Datafeed type, SR_DF_HEADER, etc. */
- int df_type;
-
/**
* This function is called once, at the beginning of an output stream.
*
*/
int (*init) (struct sr_output *o);
- /**
- * Whenever a chunk of data comes in, it will be passed to the
- * output module via this function. The <code>data_in</code> and
- * <code>length_in</code> values refers to this data; the module
- * must not alter or g_free() this buffer.
- *
- * The function must allocate a buffer for storing its output, and
- * pass along a pointer to this buffer in the <code>data_out</code>
- * parameter, as well as storing the length of the buffer in
- * <code>length_out</code>. The calling frontend will g_free()
- * this buffer when it's done with it.
- *
- * IMPORTANT: The memory allocation much happen using a glib memory
- * allocation call (not a "normal" malloc) since g_free() will be
- * used to free the memory!
- *
- * If there is no output, this function MUST store NULL in the
- * <code>data_out</code> parameter, so the caller knows not to try
- * and g_free() it.
- *
- * Note: This API call is obsolete, use receive() instead.
- *
- * @param o Pointer to the respective 'struct sr_output'.
- * @param data_in Pointer to the input data buffer.
- * @param length_in Length of the input.
- * @param data_out Pointer to the allocated output buffer.
- * @param length_out Length (in bytes) of the output.
- *
- * @retval SR_OK Success
- * @retval other Negative error code.
- */
- int (*data) (struct sr_output *o, const uint8_t *data_in,
- uint64_t length_in, uint8_t **data_out,
- uint64_t *length_out);
-
- /**
- * This function is called when an event occurs in the datafeed
- * which the output module may need to be aware of. No data is
- * passed in, only the fact that the event occurs. The following
- * events can currently be passed in:
- *
- * - SR_DF_TRIGGER: At this point in the datafeed, the trigger
- * matched. The output module may mark this in some way, e.g. by
- * plotting a red line on a graph.
- *
- * - SR_DF_END: This marks the end of the datafeed. No more calls
- * into the output module will be done, so this is a good time to
- * free up any memory used to keep state, for example.
- *
- * Any output generated by this function must have a reference to
- * it stored in the <code>data_out</code> and <code>length_out</code>
- * parameters, or NULL if no output was generated.
- *
- * Note: This API call is obsolete, use receive() instead.
- *
- * @param o Pointer to the respective 'struct sr_output'.
- * @param event_type Type of event that occured.
- * @param data_out Pointer to the allocated output buffer.
- * @param length_out Length (in bytes) of the output.
- *
- * @retval SR_OK Success
- * @retval other Negative error code.
- */
- int (*event) (struct sr_output *o, int event_type, uint8_t **data_out,
- uint64_t *length_out);
-
/**
* This function is passed a copy of every packed in the data feed.
* Any output generated by the output module in response to the
* @retval SR_OK Success
* @retval other Negative error code.
*/
- int (*receive) (struct sr_output *o, const struct sr_dev_inst *sdi,
+ int (*receive) (struct sr_output *o,
const struct sr_datafeed_packet *packet, GString **out);
/**
int (*cleanup) (struct sr_output *o);
};
-/** Constants for probe type. */
-enum {
- /** Probe type is logic probe. */
- SR_PROBE_LOGIC = 10000,
- /** Probe type is analog probe. */
- SR_PROBE_ANALOG,
+/** Constants for channel type. */
+enum sr_channeltype {
+ /** Channel type is logic channel. */
+ SR_CHANNEL_LOGIC = 10000,
+ /** Channel type is analog channel. */
+ SR_CHANNEL_ANALOG,
};
-/** Information on single probe. */
-struct sr_probe {
- /** Number of probes, starting at 0. @deprecated The index field
- * will go: use g_slist_length(sdi->probes) instead. */
+/** Information on single channel. */
+struct sr_channel {
+ /** Number of channels, starting at 0. */
int index;
- /** Probe type (SR_PROBE_LOGIC, ...) */
+ /** Channel type (SR_CHANNEL_LOGIC, ...) */
int type;
- /** Is this probe enabled? */
+ /** Is this channel enabled? */
gboolean enabled;
- /** Name of probe. */
+ /** Name of channel. */
char *name;
/** Trigger string, format like used by sigrok-cli */
char *trigger;
};
-/** Structure for groups of probes that have common properties. */
-struct sr_probe_group {
- /** Name of the probe group. */
+/** Structure for groups of channels that have common properties. */
+struct sr_channel_group {
+ /** Name of the channel group. */
char *name;
- /** List of sr_probe structs of the probes belonging to this group. */
- GSList *probes;
+ /** List of sr_channel structs of the channels belonging to this group. */
+ GSList *channels;
/** Private data for driver use. */
void *priv;
};
};
/** Constants for device classes */
-enum {
+enum sr_configkey {
/*--- Device classes ------------------------------------------------*/
/** The device can act as logic analyzer. */
*/
SR_CONF_CENTER_FREQUENCY,
- /** The device supports setting the number of logic probes. */
- SR_CONF_NUM_LOGIC_PROBES,
+ /** The device supports setting the number of logic channels. */
+ SR_CONF_NUM_LOGIC_CHANNELS,
- /** The device supports setting the number of analog probes. */
- SR_CONF_NUM_ANALOG_PROBES,
+ /** The device supports setting the number of analog channels. */
+ SR_CONF_NUM_ANALOG_CHANNELS,
/** Output voltage. */
SR_CONF_OUTPUT_VOLTAGE,
/** Over-current protection (OCP) */
SR_CONF_OVER_CURRENT_PROTECTION,
+ /** Choice of clock edge for external clock ("r" or "f"). */
+ SR_CONF_CLOCK_EDGE,
+
/*--- Special stuff -------------------------------------------------*/
/** Scan options supported by the driver. */
*/
SR_CONF_DATA_SOURCE,
- /**
- * On devices without sample compression (or compression turned off),
- * this returns the maximum number of samples that can be stored. This
- * can change as probes are disabled, depending on the hardware, so
- * should be queried after such changes are made. If not applicable,
- * fetching this value with sr_config_get() will return SR_ERR_NA.
- *
- * SR_CONF_LIMIT_SAMPLES should not be set to a higher value than
- * this value, if applicable.
- */
- SR_CONF_MAX_UNCOMPRESSED_SAMPLES,
-
/*--- Acquisition modes ---------------------------------------------*/
/**
/** The device has internal storage, into which data is logged. This
* starts or stops the internal logging. */
SR_CONF_DATALOG,
+
+ /** Device mode for multi-function devices. */
+ SR_CONF_DEVICE_MODE,
+
+ /** Self test mode. */
+ SR_CONF_TEST_MODE,
};
/** Device instance data
char *model;
/** Device version. */
char *version;
- /** List of probes. */
- GSList *probes;
- /** List of sr_probe_group structs */
- GSList *probe_groups;
+ /** List of channels. */
+ GSList *channels;
+ /** List of sr_channel_group structs */
+ GSList *channel_groups;
/** Device instance connection data (used?) */
void *conn;
/** Device instance private data (used?) */
SR_ST_STOPPING,
};
-/** Device driver data */
+/** Device driver data. See also http://sigrok.org/wiki/Hardware_driver_API . */
struct sr_dev_driver {
/* Driver-specific */
- /** Driver name */
+ /** Driver name. Lowercase a-z, 0-9 and dashes (-) only. */
char *name;
- /** Long name, e.g. device name. */
+ /** Long name. Verbose driver name shown to user. */
char *longname;
/** API version (currently 1). */
int api_version;
- /** Init driver */
+ /** Called when driver is loaded, e.g. program startup. */
int (*init) (struct sr_context *sr_ctx);
- /** Free driver */
+ /** Called before driver is unloaded.
+ * Driver must free all resouces held by it. */
int (*cleanup) (void);
- /** Scan for devices */
+ /** Scan for devices. Driver should do all initialisation required.
+ * Can be called several times, e.g. with different port options.
+ * \retval NULL Error or no devices found.
+ * \retval other GSList of a struct sr_dev_inst for each device.
+ * Must be freed by caller!
+ */
GSList *(*scan) (GSList *options);
- /** Get device list */
+ /** Get list of device instances the driver knows about.
+ * \returns NULL or GSList of a struct sr_dev_inst for each device.
+ * Must not be freed by caller!
+ */
GSList *(*dev_list) (void);
+ /** Clear list of devices the driver knows about. */
int (*dev_clear) (void);
+ /** Query value of a configuration key in driver or given device instance.
+ * @see sr_config_get().
+ */
int (*config_get) (int id, GVariant **data,
const struct sr_dev_inst *sdi,
- const struct sr_probe_group *probe_group);
+ const struct sr_channel_group *cg);
+ /** Set value of a configuration key in driver or a given device instance.
+ * @see sr_config_set(). */
int (*config_set) (int id, GVariant *data,
const struct sr_dev_inst *sdi,
- const struct sr_probe_group *probe_group);
+ const struct sr_channel_group *cg);
+ /** Channel status change.
+ * @see sr_dev_channel_enable(), sr_dev_trigger_set(). */
+ int (*config_channel_set) (const struct sr_dev_inst *sdi,
+ struct sr_channel *ch, unsigned int changes);
+ /** Apply configuration settings to the device hardware.
+ * @see sr_config_commit().*/
+ int (*config_commit) (const struct sr_dev_inst *sdi);
+ /** List all possible values for a configuration key in a device instance.
+ * @see sr_config_list().
+ */
int (*config_list) (int info_id, GVariant **data,
const struct sr_dev_inst *sdi,
- const struct sr_probe_group *probe_group);
+ const struct sr_channel_group *cg);
/* Device-specific */
/** Open device */
int (*dev_open) (struct sr_dev_inst *sdi);
/** Close device */
int (*dev_close) (struct sr_dev_inst *sdi);
- /** Start data aquisition. */
+ /** Begin data acquisition on the specified device. */
int (*dev_acquisition_start) (const struct sr_dev_inst *sdi,
void *cb_data);
- /** Stop data aquisition. */
+ /** End data acquisition on the specified device. */
int (*dev_acquisition_stop) (struct sr_dev_inst *sdi,
void *cb_data);
/* Dynamic */
- /** Device driver private data */
+ /** Device driver private data. Initialized by init(). */
void *priv;
};
projects / libsigrok.git / blobdiff