#ifdef HAVE_LIBUSB_1_0
#include <libusb.h>
#endif
+#ifdef HAVE_LIBSERIALPORT
+#include <serialport.h>
+#endif
/**
* @file
#define ARRAY_AND_SIZE(a) (a), ARRAY_SIZE(a)
#endif
+/* Portability fixes for FreeBSD. */
+#ifdef __FreeBSD__
+#define LIBUSB_CLASS_APPLICATION 0xfe
+#define libusb_handle_events_timeout_completed(ctx, tv, c) \
+ libusb_handle_events_timeout(ctx, tv)
+#endif
+
struct sr_context {
#ifdef HAVE_LIBUSB_1_0
libusb_context *libusb_ctx;
};
#endif
-#define SERIAL_PARITY_NONE 0
-#define SERIAL_PARITY_EVEN 1
-#define SERIAL_PARITY_ODD 2
+#ifdef HAVE_LIBSERIALPORT
+#define SERIAL_PARITY_NONE SP_PARITY_NONE
+#define SERIAL_PARITY_EVEN SP_PARITY_EVEN
+#define SERIAL_PARITY_ODD SP_PARITY_ODD
struct sr_serial_dev_inst {
char *port;
char *serialcomm;
int fd;
+ struct sp_port *data;
};
+#endif
/* Private driver context. */
struct drv_context {
SR_PRIV void sr_usb_dev_inst_free(struct sr_usb_dev_inst *usb);
#endif
+#ifdef HAVE_LIBSERIALPORT
/* Serial-specific instances */
SR_PRIV struct sr_serial_dev_inst *sr_serial_dev_inst_new(const char *port,
const char *serialcomm);
SR_PRIV void sr_serial_dev_inst_free(struct sr_serial_dev_inst *serial);
+#endif
/*--- hwdriver.c ------------------------------------------------------------*/
SR_PRIV int std_init(struct sr_context *sr_ctx, struct sr_dev_driver *di,
const char *prefix);
+#ifdef HAVE_LIBSERIALPORT
SR_PRIV int std_dev_acquisition_stop_serial(struct sr_dev_inst *sdi,
void *cb_data, dev_close_t dev_close_fn,
struct sr_serial_dev_inst *serial, const char *prefix);
+#endif
SR_PRIV int std_session_send_df_header(const struct sr_dev_inst *sdi,
const char *prefix);
SR_PRIV int std_dev_clear(const struct sr_dev_driver *driver,
/*--- hardware/common/serial.c ----------------------------------------------*/
+#ifdef HAVE_LIBSERIALPORT
enum {
SERIAL_RDWR = 1,
SERIAL_RDONLY = 2,
uint8_t *buf, size_t *buflen,
size_t packet_size, packet_valid_t is_valid,
uint64_t timeout_ms, int baudrate);
+#endif
/*--- hardware/common/ezusb.c -----------------------------------------------*/
/*--- hardware/common/dmm/es519xx.c -----------------------------------------*/
-#define ES519XX_11B_PACKET_SIZE (2 * 11)
+/**
+ * All 11-byte es519xx chips repeat each block twice for each conversion cycle
+ * so always read 2 blocks at a time.
+ */
+#define ES519XX_11B_PACKET_SIZE (11 * 2)
#define ES519XX_14B_PACKET_SIZE 14
struct es519xx_info {
SR_PRIV int sr_es519xx_2400_11b_parse(const uint8_t *buf, float *floatval,
struct sr_datafeed_analog *analog, void *info);
SR_PRIV gboolean sr_es519xx_19200_11b_5digits_packet_valid(const uint8_t *buf);
-SR_PRIV int sr_es519xx_19200_11b_5difits_parse(const uint8_t *buf,
+SR_PRIV int sr_es519xx_19200_11b_5digits_parse(const uint8_t *buf,
float *floatval, struct sr_datafeed_analog *analog, void *info);
SR_PRIV gboolean sr_es519xx_19200_11b_clamp_packet_valid(const uint8_t *buf);
SR_PRIV int sr_es519xx_19200_11b_clamp_parse(const uint8_t *buf,
struct metex14_info {
gboolean is_ac, is_dc, is_resistance, is_capacity, is_temperature;
gboolean is_diode, is_frequency, is_ampere, is_volt, is_farad;
- gboolean is_hertz, is_ohm, is_celsius, is_nano, is_micro, is_milli;
- gboolean is_kilo, is_mega, is_gain, is_decibel, is_hfe, is_unitless;
+ gboolean is_hertz, is_ohm, is_celsius, is_pico, is_nano, is_micro;
+ gboolean is_milli, is_kilo, is_mega, is_gain, is_decibel, is_hfe;
+ gboolean is_unitless;
};
+#ifdef HAVE_LIBSERIALPORT
SR_PRIV int sr_metex14_packet_request(struct sr_serial_dev_inst *serial);
+#endif
SR_PRIV gboolean sr_metex14_packet_valid(const uint8_t *buf);
SR_PRIV int sr_metex14_parse(const uint8_t *buf, float *floatval,
struct sr_datafeed_analog *analog, void *info);