JTAG: More STM32 dumps, specific OpenOCD commands.

[sigrok-dumps.git] / i2c / rtc_epson_8564je / README

diff --git a/i2c/rtc_epson_8564je/README b/i2c/rtc_epson_8564je/README
index bebec463875c02907b0cbb39bd73670991240e53..decf739db8fa2fb10648bb5e286a84c0bdb1ae50 100644 (file)
--- a/i2c/rtc_epson_8564je/README
+++ b/i2c/rtc_epson_8564je/README
@@ -16,7 +16,6 @@ of 1MHz. The logic analyzer probes were connected to the RTC chip like this:
   ------------------------
   0 (green)   SCL
   1 (orange)  SDA
-  GND         GND
 
 
 Data
@@ -37,7 +36,7 @@ This is what the decoded data should look like:
    S Wr:0xa2 A 0x02 A Sr Rd:0xa3 A 0x54 A 0x03 A 0x44 A 0x62 A 0x52 A
    0x51 A 0x11 N P
 
- - The abbrevations used above: S = Start, Wr = Write, A = ACK, P = Stop,
+ - The abbreviations used above: S = Start, Wr = Write, A = ACK, P = Stop,
    Sr = Repeated start, Rd = Read, N = NACK
 
 The sigrok command line used was: