;;
;; This file is part of the sigrok-firmware-fx2lafw project.
;;
-;; Copyright (C) 2009 Ubixum, Inc.
+;; Copyright (C) 2016 Uwe Hermann <uwe@hermann-uwe.de>
;;
-;; This library is free software; you can redistribute it and/or
-;; modify it under the terms of the GNU Lesser General Public
-;; License as published by the Free Software Foundation; either
-;; version 2.1 of the License, or (at your option) any later version.
+;; This program is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 2 of the License, or
+;; (at your option) any later version.
;;
-;; This library is distributed in the hope that it will be useful,
+;; This program is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-;; Lesser General Public License for more details.
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;; GNU General Public License for more details.
;;
-;; You should have received a copy of the GNU Lesser General Public
-;; License along with this library; if not, write to the Free Software
-;; Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+;; You should have received a copy of the GNU General Public License
+;; along with this program; if not, write to the Free Software
+;; Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
;;
-; this is a the default
-; full speed and high speed
-; descriptors found in the TRM
-; change however you want but leave
-; the descriptor pointers so the setupdat.c file works right
-
-
-.module DEV_DSCR
-
-; descriptor types
-; same as setupdat.h
-DSCR_DEVICE_TYPE=1
-DSCR_CONFIG_TYPE=2
-DSCR_STRING_TYPE=3
-DSCR_INTERFACE_TYPE=4
-DSCR_ENDPOINT_TYPE=5
-DSCR_DEVQUAL_TYPE=6
-
-; for the repeating interfaces
-DSCR_INTERFACE_LEN=9
-DSCR_ENDPOINT_LEN=7
-
-; endpoint types
-ENDPOINT_TYPE_CONTROL=0
-ENDPOINT_TYPE_ISO=1
-ENDPOINT_TYPE_BULK=2
-ENDPOINT_TYPE_INT=3
-
- .globl _dev_dscr, _dev_qual_dscr, _highspd_dscr, _fullspd_dscr, _dev_strings, _dev_strings_end
-; These need to be in code memory. If
-; they aren't you'll have to manully copy them somewhere
-; in code memory otherwise SUDPTRH:L don't work right
- .area DSCR_AREA (CODE)
-
-_dev_dscr:
- .db dev_dscr_end-_dev_dscr ; len
- .db DSCR_DEVICE_TYPE ; type
- .dw 0x0002 ; usb 2.0
- .db 0xff ; class (vendor specific)
- .db 0xff ; subclass (vendor specific)
- .db 0xff ; protocol (vendor specific)
- .db 64 ; packet size (ep0)
- .dw 0xB504 ; vendor id
- .dw 0x2260 ; product id
- .dw 0x0000 ; version id
- .db 1 ; manufacturure str idx
- .db 2 ; product str idx
- .db 0 ; serial str idx
- .db 1 ; n configurations
-dev_dscr_end:
-
-_dev_qual_dscr:
- .db dev_qualdscr_end-_dev_qual_dscr
- .db DSCR_DEVQUAL_TYPE
- .dw 0x0002 ; usb 2.0
- .db 0
- .db 0
- .db 0
- .db 64 ; max packet
- .db 1 ; n configs
- .db 0 ; extra reserved byte
-dev_qualdscr_end:
-
-_highspd_dscr:
- .db highspd_dscr_end-_highspd_dscr ; dscr len ;; Descriptor length
- .db DSCR_CONFIG_TYPE
- ; can't use .dw because byte order is different
- .db (highspd_dscr_realend-_highspd_dscr) % 256 ; total length of config lsb
- .db (highspd_dscr_realend-_highspd_dscr) / 256 ; total length of config msb
- .db 1 ; n interfaces
- .db 1 ; config number
- .db 0 ; config string
- .db 0x80 ; attrs = bus powered, no wakeup
- .db 55 ; max power = 110mA
-highspd_dscr_end:
-
-; all the interfaces next
-; BULK interface
- .db DSCR_INTERFACE_LEN
- .db DSCR_INTERFACE_TYPE
- .db 0 ; index
- .db 0 ; alt setting idx
- .db 1 ; n endpoints
- .db 0xff ; class
- .db 0
- .db 0
- .db 0 ; string index
-
-; endpoint 6 in
- .db DSCR_ENDPOINT_LEN
- .db DSCR_ENDPOINT_TYPE
- .db 0x86 ; ep1 dir=in and address
- .db ENDPOINT_TYPE_BULK ; type
- .db 0x00 ; max packet LSB
- .db 0x02 ; max packet size=512 bytes
- .db 0x00 ; polling interval
-
-; ISOCHRONOUS interface
- .db DSCR_INTERFACE_LEN
- .db DSCR_INTERFACE_TYPE
- .db 0 ; index
- .db 1 ; alt setting idx
- .db 1 ; n endpoints
- .db 0xff ; class
- .db 0
- .db 1
- .db 0 ; string index
-
-; endpoint 2 in
- .db DSCR_ENDPOINT_LEN
- .db DSCR_ENDPOINT_TYPE
- .db 0x82 ; ep1 dir=in and address
- .db ENDPOINT_TYPE_ISO ; type
- .db 0x00 ; max packet LSB
- .db 0x14 ; max packet size=3*1024 bytes
- .db 0x01 ; polling interval
-
-; ISOCHRONOUS interface 16MB/s
- .db DSCR_INTERFACE_LEN
- .db DSCR_INTERFACE_TYPE
- .db 0 ; index
- .db 2 ; alt setting idx
- .db 1 ; n endpoints
- .db 0xff ; class
- .db 0
- .db 1
- .db 0 ; string index
-
-; endpoint 2 in
- .db DSCR_ENDPOINT_LEN
- .db DSCR_ENDPOINT_TYPE
- .db 0x82 ; ep1 dir=in and address
- .db ENDPOINT_TYPE_ISO ; type
- .db 0x00 ; max packet LSB
- .db 0x0c ; max packet size=2*1024 bytes
- .db 0x01 ; polling interval
-
-; ISOCHRONOUS interface 8MB/s
- .db DSCR_INTERFACE_LEN
- .db DSCR_INTERFACE_TYPE
- .db 0 ; index
- .db 3 ; alt setting idx
- .db 1 ; n endpoints
- .db 0xff ; class
- .db 0
- .db 1
- .db 0 ; string index
-
-; endpoint 2 in
- .db DSCR_ENDPOINT_LEN
- .db DSCR_ENDPOINT_TYPE
- .db 0x82 ; ep1 dir=in and address
- .db ENDPOINT_TYPE_ISO ; type
- .db 0x00 ; max packet LSB
- .db 0x04 ; max packet size=1024 bytes
- .db 0x01 ; polling interval
-
-; ISOCHRONOUS interface 4MB/s
- .db DSCR_INTERFACE_LEN
- .db DSCR_INTERFACE_TYPE
- .db 0 ; index
- .db 4 ; alt setting idx
- .db 1 ; n endpoints
- .db 0xff ; class
- .db 0
- .db 1
- .db 0 ; string index
-
-; endpoint 2 in
- .db DSCR_ENDPOINT_LEN
- .db DSCR_ENDPOINT_TYPE
- .db 0x82 ; ep1 dir=in and address
- .db ENDPOINT_TYPE_ISO ; type
- .db 0x00 ; max packet LSB
- .db 0x04 ; max packet size=1024 bytes
- .db 0x02 ; polling interval
-
-
-; ISOCHRONOUS interface 2MB/s
- .db DSCR_INTERFACE_LEN
- .db DSCR_INTERFACE_TYPE
- .db 0 ; index
- .db 5 ; alt setting idx
- .db 1 ; n endpoints
- .db 0xff ; class
- .db 0
- .db 1
- .db 0 ; string index
-
-; endpoint 2 in
- .db DSCR_ENDPOINT_LEN
- .db DSCR_ENDPOINT_TYPE
- .db 0x82 ; ep1 dir=in and address
- .db ENDPOINT_TYPE_ISO ; type
- .db 0x00 ; max packet LSB
- .db 0x04 ; max packet size=1024 bytes
- .db 0x03 ; polling interval
-
-; ISOCHRONOUS interface 1MB/s
- .db DSCR_INTERFACE_LEN
- .db DSCR_INTERFACE_TYPE
- .db 0 ; index
- .db 6 ; alt setting idx
- .db 1 ; n endpoints
- .db 0xff ; class
- .db 0
- .db 1
- .db 0 ; string index
-
-; endpoint 2 in
- .db DSCR_ENDPOINT_LEN
- .db DSCR_ENDPOINT_TYPE
- .db 0x82 ; ep1 dir=in and address
- .db ENDPOINT_TYPE_ISO ; type
- .db 0x00 ; max packet LSB
- .db 0x04 ; max packet size=1024 bytes
- .db 0x04 ; polling interval
-
-; ISOCHRONOUS interface 500 kB/s
- .db DSCR_INTERFACE_LEN
- .db DSCR_INTERFACE_TYPE
- .db 0 ; index
- .db 7 ; alt setting idx
- .db 1 ; n endpoints
- .db 0xff ; class
- .db 0
- .db 1
- .db 0 ; string index
-
-; endpoint 2 in
- .db DSCR_ENDPOINT_LEN
- .db DSCR_ENDPOINT_TYPE
- .db 0x82 ; ep1 dir=in and address
- .db ENDPOINT_TYPE_ISO ; type
- .db 0x00 ; max packet LSB
- .db 0x02 ; max packet size=512 bytes
- .db 0x04 ; polling interval
-
-
-highspd_dscr_realend:
-
-.even
-_fullspd_dscr:
- .db fullspd_dscr_end-_fullspd_dscr ; dscr len
- .db DSCR_CONFIG_TYPE
- ; can't use .dw because byte order is different
- .db (fullspd_dscr_realend-_fullspd_dscr) % 256 ; total length of config lsb
- .db (fullspd_dscr_realend-_fullspd_dscr) / 256 ; total length of config msb
- .db 2 ; n interfaces
- .db 1 ; config number
- .db 0 ; config string
- .db 0x80 ; attrs = bus powered, no wakeup
- .db 55 ; max power = 110mA
-fullspd_dscr_end:
-
-
-; all the interfaces next
-; BULK interface
- .db DSCR_INTERFACE_LEN
- .db DSCR_INTERFACE_TYPE
- .db 0 ; index
- .db 0 ; alt setting idx
- .db 1 ; n endpoints
- .db 0xff ; class
- .db 0
- .db 0
- .db 0 ; string index
-
-; endpoint 6 in
- .db DSCR_ENDPOINT_LEN
- .db DSCR_ENDPOINT_TYPE
- .db 0x86 ; ep1 dir=in and address
- .db ENDPOINT_TYPE_BULK ; type
- .db 0x40 ; max packet LSB
- .db 0x00 ; max packet size=512 bytes
- .db 0x00 ; polling interval
-
-; ISOCHRONOUS interface 1 MB/s
- .db DSCR_INTERFACE_LEN
- .db DSCR_INTERFACE_TYPE
- .db 0 ; index
- .db 1 ; alt setting idx
- .db 1 ; n endpoints
- .db 0xff ; class
- .db 0
- .db 1
- .db 0 ; string index
-
-; endpoint 2 in
- .db DSCR_ENDPOINT_LEN
- .db DSCR_ENDPOINT_TYPE
- .db 0x82 ; ep1 dir=in and address
- .db ENDPOINT_TYPE_ISO ; type
- .db 0xff ; max packet LSB
- .db 0x03 ; max packet size=1023 bytes
- .db 0x01 ; polling interval
-
-; ISOCHRONOUS interface 500 kB/s
- .db DSCR_INTERFACE_LEN
- .db DSCR_INTERFACE_TYPE
- .db 0 ; index
- .db 2 ; alt setting idx
- .db 1 ; n endpoints
- .db 0xff ; class
- .db 0
- .db 1
- .db 0 ; string index
-
-; endpoint 2 in
- .db DSCR_ENDPOINT_LEN
- .db DSCR_ENDPOINT_TYPE
- .db 0x82 ; ep1 dir=in and address
- .db ENDPOINT_TYPE_ISO ; type
- .db 0x00 ; max packet LSB
- .db 0x02 ; max packet size=512 bytes
- .db 0x01 ; polling interval
-
-fullspd_dscr_realend:
-
-.even
-_dev_strings:
-; sample string
-_string0:
- .db string0end-_string0 ; len
- .db DSCR_STRING_TYPE
- .db 0x09, 0x04 ; 0x0409 is the language code for English. Possible to add more codes after this.
-string0end:
-; add more strings here
-_string1:
- .db string1end-_string1 ; len
- .db DSCR_STRING_TYPE
- .ascii 'O\0D\0M\0'
-string1end:
-_string2:
- .db string2end-_string2 ; len
- .db DSCR_STRING_TYPE
- .ascii 'H\0a\0n\0t\0e\0k\0D\0S\0O\0006\0000\0002\0002\0B\0E\0'
-string2end:
-
+VID = 0x501d ; Manufacturer ID (0x1d50)
+PID = 0x8e60 ; Product ID (0x608e)
+VER = 0x0200 ; Product "version". 0x0002 == SainSmart DDS120.
+.include "dscr_hantek_6022be.inc"
+string_descriptor_a 3,^"SainSmart DDS120"
_dev_strings_end:
- .dw 0x0000 ; in case you wanted to look at memory between _dev_strings and _dev_strings_end
+ .dw 0x0000
projects / sigrok-firmware-fx2lafw.git / blobdiff