output/csv: use intermediate time_t var, silence compiler warning

[libsigrok.git] / hardware / zeroplus-logic-cube / analyzer.h

diff --git a/hardware/zeroplus-logic-cube/analyzer.h b/hardware/zeroplus-logic-cube/analyzer.h
deleted file mode 100644 (file)
index 4d90e8b..0000000
--- a/hardware/zeroplus-logic-cube/analyzer.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- Copyright (c) 2010 Sven Peter <sven@fail0verflow.com>
- Copyright (c) 2010 Haxx Enterprises <bushing@gmail.com>
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or
- without modification, are permitted provided that the following
- conditions are met:
-
- * Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-
- * Redistributions in binary form must reproduce the above copyright notice,
-   this list of conditions and the following disclaimer in the documentation
-   and/or other materials provided with the distribution.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
-  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
-  THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-#ifndef ANALYZER_H__
-#define ANALYZER_H__    1
-#include <libusb.h>
-#define    STATUS_FLAG_NONE         0x00
-#define    STATUS_FLAG_RESET        0x01
-#define    STATUS_FLAG_INIT         0x02
-#define    STATUS_FLAG_GO           0x04
-#define    STATUS_FLAG_PAUSE        0x08
-#define    STATUS_FLAG_READ         0x10
-#define    STATUS_FLAG_20           0x20
-
-#define    MEMORY_SIZE_8K           0x00
-#define    MEMORY_SIZE_64K          0x01
-#define    MEMORY_SIZE_128K         0x02
-#define    MEMORY_SIZE_512K         0x04
-
-#define    STATUS_BUSY              0x01  // WTF / ???
-#define    STATUS_READY             0x02
-#define    STATUS_BUTTON_PRESSED    0x04
-
-#define    CHANNEL_A                0x1000
-#define    CHANNEL_B                0x2000
-#define    CHANNEL_C                0x3000
-#define    CHANNEL_D                0x4000
-
-#define    FREQ_SCALE_HZ            0
-#define    FREQ_SCALE_KHZ           1
-#define    FREQ_SCALE_MHZ           2
-
-#define    FILTER_HIGH              0
-#define    FILTER_LOW               1
-
-#define    COMPRESSION_NONE         0x0001
-#define    COMPRESSION_ENABLE       0x8001
-#define    COMPRESSION_DOUBLE       0x8002
-
-enum {
-       TRIGGER_HIGH = 0,
-       TRIGGER_LOW,
-       TRIGGER_POSEDGE,
-       TRIGGER_NEGEDGE,
-       TRIGGER_ANYEDGE
-};
-
-void analyzer_set_freq(int freq, int scale);
-void analyzer_set_ramsize_trigger_address(unsigned int address);
-void analyzer_set_triggerbar_address(unsigned int address);
-void analyzer_set_compression(unsigned int type);
-void analyzer_set_memory_size(unsigned int size);
-void analyzer_add_trigger(int channel, int type);
-void analyzer_set_trigger_count(int count);
-void analyzer_add_filter(int channel, int type);
-
-unsigned int analyzer_read_id(libusb_device_handle *devh);
-unsigned int analyzer_get_stop_address(libusb_device_handle *devh);
-unsigned int analyzer_get_now_address(libusb_device_handle *devh);
-unsigned int analyzer_get_trigger_address(libusb_device_handle *devh);
-int analyzer_decompress(void *input, unsigned int input_len, void *output, unsigned int output_len);
-
-void analyzer_reset(libusb_device_handle *devh);
-void analyzer_initialize(libusb_device_handle *devh);
-void analyzer_wait(libusb_device_handle *devh, int set, int unset);
-void analyzer_read_start(libusb_device_handle *devh);
-int analyzer_read_data(libusb_device_handle *devh, void *buffer, unsigned int size);
-void analyzer_read_stop(libusb_device_handle *devh);
-void analyzer_start(libusb_device_handle *devh);
-void analyzer_configure(libusb_device_handle *devh);
-
-void analyzer_wait_button(libusb_device_handle *devh);
-void analyzer_wait_data(libusb_device_handle *devh);
-#endif