*/
#include <glib.h>
-#include "libsigrok.h"
-#include "libsigrok-internal.h"
-#include "protocol.h"
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <string.h>
#include <errno.h>
+#include "libsigrok.h"
+#include "libsigrok-internal.h"
+#include "protocol.h"
+
+#define SERIALCOMM "2400/8n1"
static const int hwopts[] = {
SR_HWOPT_CONN,
NULL,
};
-SR_PRIV struct sr_dev_driver tekpower_driver_info;
-static struct sr_dev_driver *di = &tekpower_driver_info;
+SR_PRIV struct sr_dev_driver tekpower_dmm_driver_info;
+static struct sr_dev_driver *di = &tekpower_dmm_driver_info;
/* Properly close and free all devices. */
static int clear_instances(void)
struct drv_context *drvc;
if (!(drvc = g_try_malloc0(sizeof(struct drv_context)))) {
- sr_err("driver context malloc failed.");
- return SR_ERR;
+ sr_err("Driver context malloc failed.");
+ return SR_ERR_MALLOC;
}
di->priv = drvc;
return SR_OK;
}
-static int serial_readline(int fd, char **buf, size_t *buflen,
- uint64_t timeout_ms)
-{
- uint64_t start;
- int maxlen, len;
-
- timeout_ms *= 1000;
- start = g_get_monotonic_time();
-
- maxlen = *buflen;
- *buflen = len = 0;
- while(1) {
- len = maxlen - *buflen - 1;
- if (len < 1)
- break;
- len = serial_read(fd, *buf + *buflen, 1);
- if (len > 0) {
- *buflen += len;
- *(*buf + *buflen) = '\0';
- if (*buflen > 0 && *(*buf + *buflen - 1) == '\r') {
- /* Strip LF and terminate. */
- *(*buf + --*buflen) = '\0';
- break;
- }
- }
- if (g_get_monotonic_time() - start > timeout_ms)
- /* Timeout */
- break;
- g_usleep(2000);
- }
-
- return SR_OK;
-}
-
static GSList *lcd14_scan(const char *conn, const char *serialcomm)
{
struct sr_dev_inst *sdi;
struct drv_context *drvc;
struct dev_context *devc;
struct sr_probe *probe;
+ struct sr_serial_dev_inst *serial;
GSList *devices;
- int fd, retry;
+ int dropped, ret;
size_t len;
- char buf[128], *b;
+ uint8_t buf[128];
- if ((fd = serial_open(conn, O_RDONLY|O_NONBLOCK)) == -1) {
- sr_err("unable to open %s: %s",
- conn, strerror(errno));
+ if (!(serial = sr_serial_dev_inst_new(conn, serialcomm)))
return NULL;
- }
- if (serial_set_paramstr(fd, serialcomm) != SR_OK) {
- sr_err("unable to set serial parameters");
+
+ if (serial_open(serial, SERIAL_RDONLY | SERIAL_NONBLOCK) != SR_OK)
return NULL;
- }
- sr_info("probing port %s readonly", conn);
+ sr_info("Probing port %s readonly.", conn);
drvc = di->priv;
- b = buf;
- retry = 0;
devices = NULL;
- serial_flush(fd);
- /* There's no way to get an ID from the multimeter. It just sends data
- * periodically, so the best we can do is check if the packets match the
- * expected format. */
- while (!devices && retry < 3)
- {
- size_t i;
- size_t good_packets = 0;
- retry++;
-
- /* Let's get a bit of data and see if we can find a packet */
- len = sizeof(buf);
- serial_readline(fd, &b, &len, 500);
- if( (len == 0) || (len < LCD14_PACKET_SIZE) ) {
- /* Not enough data received, is the DMM connected ? */
- continue;
- }
-
- /* Let's treat our buffer like a stream, and find any
- * valid packets */
- for( i = 0; i < len - LCD14_PACKET_SIZE + 1;
- /* don't increment i here */ )
- {
- const lcd14_packet *packet = (void *)(&buf[i]);
- if( !lcd14_is_packet_valid(packet, NULL) ){
- i++;
- continue;
- }
- good_packets++;
- i += LCD14_PACKET_SIZE;
- }
-
- /* If we dropped more than two packets worth of data, something
- * is wrong */
- size_t dropped = len - (good_packets * LCD14_PACKET_SIZE);
- if(dropped > 2 * LCD14_PACKET_SIZE)
- continue;
-
- /* Let's see if we have anything good */
- if (good_packets == 0)
- continue;
+ serial_flush(serial);
+
+ /*
+ * There's no way to get an ID from the multimeter. It just sends data
+ * periodically, so the best we can do is check if the packets match
+ * the expected format.
+ */
+
+ /* Let's get a bit of data and see if we can find a packet. */
+ len = sizeof(buf);
+
+ ret = serial_stream_detect(serial, buf, &len, FS9721_PACKET_SIZE,
+ sr_fs9721_packet_valid, 1000, 2400);
+ if (ret != SR_OK)
+ goto scan_cleanup;
+
+ /*
+ * If we dropped more than two packets worth of data, something is
+ * wrong. We shouldn't quit however, since the dropped bytes might be
+ * just zeroes at the beginning of the stream. Those can occur as a
+ * combination of the nonstandard cable that ships with this device and
+ * the serial port or USB to serial adapter.
+ */
+ dropped = len - FS9721_PACKET_SIZE;
+ if (dropped > 2 * FS9721_PACKET_SIZE)
+ sr_warn("Had to drop too much data.");
+
+ sr_info("Found device on port %s.", conn);
+
+ if (!(sdi = sr_dev_inst_new(0, SR_ST_INACTIVE, "TekPower",
+ "TP4000ZC", "")))
+ goto scan_cleanup;
+
+ if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) {
+ sr_err("Device context malloc failed.");
+ goto scan_cleanup;
+ }
- sr_info("found device on port %s", conn);
+ devc->serial = serial;
- if (!(sdi = sr_dev_inst_new(0, SR_ST_INACTIVE, "TekPower",
- "TP4000ZC", "")))
- return NULL;
- if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) {
- sr_dbg("failed to malloc devc");
- return NULL;
- }
+ sdi->priv = devc;
+ sdi->driver = di;
+ if (!(probe = sr_probe_new(0, SR_PROBE_ANALOG, TRUE, "P1")))
+ goto scan_cleanup;
+ sdi->probes = g_slist_append(sdi->probes, probe);
+ drvc->instances = g_slist_append(drvc->instances, sdi);
+ devices = g_slist_append(devices, sdi);
- /* devc->profile = RADIOSHACK_22_812; */
- devc->serial = sr_serial_dev_inst_new(conn, -1);
- devc->serialcomm = g_strdup(serialcomm);
-
- sdi->priv = devc;
- sdi->driver = di;
- if (!(probe = sr_probe_new(0, SR_PROBE_ANALOG, TRUE, "P1")))
- return NULL;
- sdi->probes = g_slist_append(sdi->probes, probe);
- drvc->instances = g_slist_append(drvc->instances, sdi);
- devices = g_slist_append(devices, sdi);
- break;
- }
+scan_cleanup:
+ serial_close(serial);
- serial_close(fd);
return devices;
}
/* Use the provided comm specs. */
devices = lcd14_scan(conn, serialcomm);
} else {
- /* Then try the default 2400 8n1 */
- devices = lcd14_scan(conn, "2400/8n1");
+ /* Try the default. */
+ devices = lcd14_scan(conn, SERIALCOMM);
}
return devices;
return SR_ERR_BUG;
}
- devc->serial->fd = serial_open(devc->serial->port, O_RDONLY);
- if (devc->serial->fd == -1) {
- sr_err("Couldn't open serial port '%s'.",
- devc->serial->port);
+ if (serial_open(devc->serial, SERIAL_RDONLY) != SR_OK)
return SR_ERR;
- }
- if (serial_set_paramstr(devc->serial->fd, devc->serialcomm) != SR_OK) {
- sr_err("unable to set serial parameters");
- return SR_ERR;
- }
+
sdi->status = SR_ST_ACTIVE;
return SR_OK;
}
if (devc->serial && devc->serial->fd != -1) {
- serial_close(devc->serial->fd);
- devc->serial->fd = -1;
+ serial_close(devc->serial);
sdi->status = SR_ST_INACTIVE;
}
}
static int hw_info_get(int info_id, const void **data,
- const struct sr_dev_inst *sdi)
+ const struct sr_dev_inst *sdi)
{
- (void)sdi; /* Does nothing. prevents "unused parameter" warning */
+ (void)sdi;
switch (info_id) {
case SR_DI_HWOPTS:
}
static int hw_dev_config_set(const struct sr_dev_inst *sdi, int hwcap,
- const void *value)
+ const void *value)
{
struct dev_context *devc;
}
static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
- void *cb_data)
+ void *cb_data)
{
struct sr_datafeed_packet packet;
struct sr_datafeed_header header;
devc->cb_data = cb_data;
- /* Reset the number of samples to take. If we've already collected our
+ /*
+ * Reset the number of samples to take. If we've already collected our
* quota, but we start a new session, and don't reset this, we'll just
- * quit without aquiring any new samples */
+ * quit without acquiring any new samples.
+ */
devc->num_samples = 0;
/* Send header packet to the session bus. */
meta.num_probes = 1;
sr_session_send(devc->cb_data, &packet);
- /* Poll every 100ms, or whenever some data comes in. */
+ /* Poll every 50ms, or whenever some data comes in. */
sr_source_add(devc->serial->fd, G_IO_IN, 50,
- lcd14_receive_data, (void *)sdi );
+ tekpower_dmm_receive_data, (void *)sdi);
return SR_OK;
}
-static int hw_dev_acquisition_stop(const struct sr_dev_inst *sdi,
- void *cb_data)
+static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
{
struct sr_datafeed_packet packet;
struct dev_context *devc;
return SR_OK;
}
-SR_PRIV struct sr_dev_driver tekpower_driver_info = {
+SR_PRIV struct sr_dev_driver tekpower_dmm_driver_info = {
.name = "tekpower-dmm",
- .longname = "TekPower/Digitek 4000ZC",
+ .longname = "TekPower/Digitek TP4000ZC/DT4000ZC DMM",
.api_version = 1,
.init = hw_init,
.cleanup = hw_cleanup,
projects / libsigrok.git / blobdiff