/*
- * This file is part of the sigrok project.
+ * This file is part of the libsigrok project.
*
- * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
+ * Copyright (C) 2011 Daniel Ribeiro <drwyrm@gmail.com>
+ * Copyright (C) 2012 Renato Caldas <rmsc@fe.up.pt>
+ * Copyright (C) 2013 Lior Elazary <lelazary@yahoo.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#ifndef LIBSIGROK_HARDWARE_LINK_MSO19_PROTOCOL_H
#define LIBSIGROK_HARDWARE_LINK_MSO19_PROTOCOL_H
-#define USB_VENDOR "3195"
-#define USB_PRODUCT "f190"
-
#include <stdint.h>
#include <string.h>
#include <glib.h>
+#include <libudev.h>
#include "libsigrok.h"
#include "libsigrok-internal.h"
-/* Message logging helpers with driver-specific prefix string. */
-#define DRIVER_LOG_DOMAIN "mso19: "
-#define sr_log(l, s, args...) sr_log(l, DRIVER_LOG_DOMAIN s, ## args)
-#define sr_spew(s, args...) sr_spew(DRIVER_LOG_DOMAIN s, ## args)
-#define sr_dbg(s, args...) sr_dbg(DRIVER_LOG_DOMAIN s, ## args)
-#define sr_info(s, args...) sr_info(DRIVER_LOG_DOMAIN s, ## args)
-#define sr_warn(s, args...) sr_warn(DRIVER_LOG_DOMAIN s, ## args)
-#define sr_err(s, args...) sr_err(DRIVER_LOG_DOMAIN s, ## args)
-
-#define NUM_PROBES 8
-#define NUM_TRIGGER_STAGES 4
-#define TRIGGER_TYPES "01"
-#define SERIAL_SPEED B115200
-#define CLOCK_RATE SR_MHZ(100)
-#define MIN_NUM_SAMPLES 4
-
-
-///* Bitmasks for CMD_FLAGS */
-//#define FLAG_DEMUX 0x01
-//#define FLAG_FILTER 0x02
-//#define FLAG_CHANNELGROUP_1 0x04
-//#define FLAG_CHANNELGROUP_2 0x08
-//#define FLAG_CHANNELGROUP_3 0x10
-//#define FLAG_CHANNELGROUP_4 0x20
-//#define FLAG_CLOCK_EXTERNAL 0x40
-//#define FLAG_CLOCK_INVERTED 0x80
-//#define FLAG_RLE 0x0100
+#define LOG_PREFIX "link-mso19"
+
+#define USB_VENDOR "3195"
+#define USB_PRODUCT "f190"
+
+#define NUM_PROBES (1 + 8)
+#define NUM_TRIGGER_STAGES 4
+#define TRIGGER_TYPE "01" //the first r/f is used for the whole group
+#define SERIALCOMM "460800/8n1/flow=2"
+#define SERIALCONN "/dev/ttyUSB0"
+#define CLOCK_RATE SR_MHZ(100)
+#define MIN_NUM_SAMPLES 4
#define MSO_TRIGGER_UNKNOWN '!'
#define MSO_TRIGGER_UNKNOWN1 '1'
#define MSO_TRIGGER_FIRED '5'
#define MSO_TRIGGER_DATAREADY '6'
+enum trigger_slopes {
+ SLOPE_POSITIVE = 0,
+ SLOPE_NEGATIVE,
+};
+
/* Structure for the pattern generator state */
struct mso_patgen {
/* Pattern generator clock config */
uint8_t config;
/* Samples buffer */
uint8_t buffer[1024];
- /* Input/output configuration for the samples buffer (?)*/
+ /* Input/output configuration for the samples buffer (?) */
uint8_t io[1024];
/* Number of loops for the pattern generator */
uint8_t loops;
uint8_t hwmodel;
uint8_t hwrev;
struct sr_serial_dev_inst *serial;
-// uint8_t num_sample_rates;
+// uint8_t num_sample_rates;
/* calibration */
double vbit;
uint16_t dac_offset;
uint16_t offset_range;
+ uint64_t limit_samples;
+ uint64_t num_samples;
/* register cache */
uint8_t ctlbase1;
uint8_t ctlbase2;
uint8_t la_threshold;
uint64_t cur_rate;
uint8_t dso_probe_attn;
+ int8_t use_trigger;
uint8_t trigger_chan;
uint8_t trigger_slope;
uint8_t trigger_outsrc;
uint8_t trigger_state;
+ uint8_t trigger_holdoff[2];
uint8_t la_trigger;
uint8_t la_trigger_mask;
double dso_trigger_voltage;
uint16_t dso_trigger_width;
struct mso_prototrig protocol_trigger;
- void *session_dev_id;
+ void *cb_data;
uint16_t buffer_n;
char buffer[4096];
};
SR_PRIV int mso_parse_serial(const char *iSerial, const char *iProduct,
- struct dev_context *ctx);
-SR_PRIV int mso_check_trigger(struct sr_serial_dev_inst *serial, uint8_t *info);
+ struct dev_context *ctx);
+SR_PRIV int mso_check_trigger(struct sr_serial_dev_inst *serial,
+ uint8_t * info);
SR_PRIV int mso_reset_adc(struct sr_dev_inst *sdi);
SR_PRIV int mso_clkrate_out(struct sr_serial_dev_inst *serial, uint16_t val);
-SR_PRIV int mso_configure_rate(struct sr_dev_inst *sdi, uint32_t rate);
+SR_PRIV int mso_configure_rate(const struct sr_dev_inst *sdi, uint32_t rate);
SR_PRIV int mso_receive_data(int fd, int revents, void *cb_data);
-SR_PRIV int mso_configure_trigger(struct sr_dev_inst *sdi);
-SR_PRIV int mso_configure_threshold_level(struct sr_dev_inst *sdi);
+SR_PRIV int mso_configure_trigger(const struct sr_dev_inst *sdi);
+SR_PRIV int mso_configure_threshold_level(const struct sr_dev_inst *sdi);
SR_PRIV int mso_read_buffer(struct sr_dev_inst *sdi);
-SR_PRIV int mso_arm(struct sr_dev_inst *sdi);
+SR_PRIV int mso_arm(const struct sr_dev_inst *sdi);
SR_PRIV int mso_force_capture(struct sr_dev_inst *sdi);
-SR_PRIV int mso_dac_out(struct sr_dev_inst *sdi, uint16_t val);
-SR_PRIV int mso_configure_rate(struct sr_dev_inst *sdi, uint32_t rate);
+SR_PRIV int mso_dac_out(const struct sr_dev_inst *sdi, uint16_t val);
SR_PRIV inline uint16_t mso_calc_raw_from_mv(struct dev_context *devc);
+SR_PRIV int mso_reset_fsm(struct sr_dev_inst *sdi);
+SR_PRIV int mso_toggle_led(struct sr_dev_inst *sdi, int state);
+SR_PRIV int mso_configure_channels(const struct sr_dev_inst *sdi);
SR_PRIV void stop_acquisition(const struct sr_dev_inst *sdi);
-///////////////////////
-//
-
-/* serial protocol */
-#define mso_trans(a, v) \
- (((v) & 0x3f) | (((v) & 0xc0) << 6) | (((a) & 0xf) << 8) | \
- ((~(v) & 0x20) << 1) | ((~(v) & 0x80) << 7))
-
-SR_PRIV static const char mso_head[] = { 0x40, 0x4c, 0x44, 0x53, 0x7e };
-SR_PRIV static const char mso_foot[] = { 0x7e };
-
/* bank agnostic registers */
#define REG_CTL2 15
#define REG_CTL1 14
/* bank 2 registers (SPI/I2C protocol trigger) */
-#define REG_PT_WORD(x) (x)
-#define REG_PT_MASK(x) (x+4)
-#define REG_PT_SPIMODE 8
+#define REG_PT_WORD(x) (x)
+#define REG_PT_MASK(x) (x + 4)
+#define REG_PT_SPIMODE 8
/* bits - REG_CTL1 */
-#define BIT_CTL1_RESETFSM (1 << 0)
-#define BIT_CTL1_ARM (1 << 1)
-#define BIT_CTL1_ADC_UNKNOWN4 (1 << 4) /* adc enable? */
-#define BIT_CTL1_RESETADC (1 << 6)
-#define BIT_CTL1_LED (1 << 7)
+#define BIT_CTL1_RESETFSM (1 << 0)
+#define BIT_CTL1_ARM (1 << 1)
+#define BIT_CTL1_ADC_UNKNOWN4 (1 << 4) /* adc enable? */
+#define BIT_CTL1_RESETADC (1 << 6)
+#define BIT_CTL1_LED (1 << 7)
/* bits - REG_CTL2 */
-#define BITS_CTL2_BANK(x) (x & 0x3)
-#define BIT_CTL2_SLOWMODE (1 << 5)
+#define BITS_CTL2_BANK(x) (x & 0x3)
+#define BIT_CTL2_SLOWMODE (1 << 5)
struct rate_map {
uint32_t rate;
uint8_t slowmode;
};
-static struct rate_map rate_map[] = {
- { SR_MHZ(200), 0x0205, 0 },
- { SR_MHZ(100), 0x0105, 0 },
- { SR_MHZ(50), 0x0005, 0 },
- { SR_MHZ(20), 0x0303, 0 },
- { SR_MHZ(10), 0x0308, 0 },
- { SR_MHZ(5), 0x030c, 0 },
- { SR_MHZ(2), 0x0330, 0 },
- { SR_MHZ(1), 0x0362, 0 },
- { SR_KHZ(500), 0x03c6, 0 },
- { SR_KHZ(200), 0x07f2, 0 },
- { SR_KHZ(100), 0x0fe6, 0 },
- { SR_KHZ(50), 0x1fce, 0 },
- { SR_KHZ(20), 0x4f86, 0 },
- { SR_KHZ(10), 0x9f0e, 0 },
- { SR_KHZ(5), 0x03c7, 0x20 },
- { SR_KHZ(2), 0x07f3, 0x20 },
- { SR_KHZ(1), 0x0fe7, 0x20 },
- { 500, 0x1fcf, 0x20 },
- { 200, 0x4f87, 0x20 },
- { 100, 0x9f0f, 0x20 },
+static const struct rate_map rate_map[] = {
+ { SR_MHZ(200), 0x0205, 0 },
+ { SR_MHZ(100), 0x0105, 0 },
+ { SR_MHZ(50), 0x0005, 0 },
+ { SR_MHZ(20), 0x0303, 0 },
+ { SR_MHZ(10), 0x0308, 0 },
+ { SR_MHZ(5), 0x030c, 0 },
+ { SR_MHZ(2), 0x0330, 0 },
+ { SR_MHZ(1), 0x0362, 0 },
+ { SR_KHZ(500), 0x03c6, 0 },
+ { SR_KHZ(200), 0x07f2, 0 },
+ { SR_KHZ(100), 0x0fe6, 0 },
+ { SR_KHZ(50), 0x1fce, 0 },
+ { SR_KHZ(20), 0x4f86, 0 },
+ { SR_KHZ(10), 0x9f0e, 0 },
+ { SR_KHZ(5), 0x03c7, 0x20 },
+ { SR_KHZ(2), 0x07f3, 0x20 },
+ { SR_KHZ(1), 0x0fe7, 0x20 },
+ { SR_HZ(500), 0x1fcf, 0x20 },
+ { SR_HZ(200), 0x4f87, 0x20 },
+ { SR_HZ(100), 0x9f0f, 0x20 },
};
/* FIXME: Determine corresponding voltages */
-static uint16_t la_threshold_map[] = {
+static const uint16_t la_threshold_map[] = {
0x8600,
0x8770,
0x88ff,
0x8fff,
};
-
-//SR_PRIV extern const char *ols_probe_names[NUM_PROBES + 1];
-//
-//SR_PRIV int send_shortcommand(struct sr_serial_dev_inst *serial,
-// uint8_t command);
-//SR_PRIV int send_longcommand(struct sr_serial_dev_inst *serial,
-// uint8_t command, uint32_t data);
-//SR_PRIV int ols_configure_probes(const struct sr_dev_inst *sdi);
-//SR_PRIV uint32_t reverse16(uint32_t in);
-//SR_PRIV uint32_t reverse32(uint32_t in);
-//SR_PRIV struct dev_context *ols_dev_new(void);
-//SR_PRIV struct sr_dev_inst *get_metadata(struct sr_serial_dev_inst *serial);
-//SR_PRIV int ols_set_samplerate(const struct sr_dev_inst *sdi,
-// uint64_t samplerate,
-// const struct sr_samplerates *samplerates);
-//SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data);
-
#endif