Rename 'struct sr_probe' to 'struct sr_channel' everywhere.

[libsigrok.git] / hardware / link-mso19 / protocol.c

diff --git a/hardware/link-mso19/protocol.c b/hardware/link-mso19/protocol.c
index 350cc7d148602136ebdef14fbcf0079407f9b19b..942f0488c6d1eea39e62d6f78cd1e9dd40ed2616 100644 (file)
--- a/hardware/link-mso19/protocol.c
+++ b/hardware/link-mso19/protocol.c
@@ -1,5 +1,5 @@
 /*
- * This file is part of the sigrok project.
+ * This file is part of the libsigrok project.
  *
  * Copyright (C) 2011 Daniel Ribeiro <drwyrm@gmail.com>
  * Copyright (C) 2012 Renato Caldas <rmsc@fe.up.pt>
@@ -20,7 +20,6 @@
  */
 
 #include "protocol.h"
-#include <arpa/inet.h>
 
 /* serial protocol */
 #define mso_trans(a, v) \
@@ -55,7 +54,7 @@ SR_PRIV int mso_send_control_message(struct sr_serial_dev_inst *serial,
        p += sizeof(mso_head);
 
        for (i = 0; i < n; i++) {
-               *(uint16_t *) p = htons(payload[i]);
+               *(uint16_t *) p = g_htons(payload[i]);
                p += 2;
        }
        memcpy(p, mso_foot, sizeof(mso_foot));
@@ -122,7 +121,7 @@ SR_PRIV int mso_configure_trigger(const struct sr_dev_inst *sdi)
        uint16_t ops[18];
        ops[0] = mso_trans(3, threshold_value & 0xff);
        //The trigger_config also holds the 2 MSB bits from the threshold value
-       ops[1] = mso_trans(4, trigger_config | (threshold_value >> 8) & 0x03);
+       ops[1] = mso_trans(4, trigger_config | ((threshold_value >> 8) & 0x03));
        ops[2] = mso_trans(5, devc->la_trigger);
        ops[3] = mso_trans(6, devc->la_trigger_mask);
        ops[4] = mso_trans(7, devc->trigger_holdoff[0]);
@@ -216,7 +215,8 @@ SR_PRIV int mso_parse_serial(const char *iSerial, const char *iProduct,
 {
        unsigned int u1, u2, u3, u4, u5, u6;
 
-       iProduct = iProduct;
+       (void)iProduct;
+
        /* FIXME: This code is in the original app, but I think its
         * used only for the GUI */
        /*    if (strstr(iProduct, "REV_02") || strstr(iProduct, "REV_03"))
@@ -294,7 +294,7 @@ SR_PRIV void stop_acquisition(const struct sr_dev_inst *sdi)
        struct dev_context *devc;
 
        devc = sdi->priv;
-       sr_source_remove(devc->serial->fd);
+       serial_source_remove(devc->serial);
 
        /* Terminate session */
        packet.type = SR_DF_END;
@@ -334,7 +334,7 @@ SR_PRIV int mso_configure_rate(const struct sr_dev_inst *sdi, uint32_t rate)
        return ret;
 }
 
-SR_PRIV int mso_check_trigger(struct sr_serial_dev_inst *serial, uint8_t * info)
+SR_PRIV int mso_check_trigger(struct sr_serial_dev_inst *serial, uint8_t *info)
 {
        uint16_t ops[] = { mso_trans(REG_TRIGGER, 0) };
        int ret;
@@ -347,7 +347,8 @@ SR_PRIV int mso_check_trigger(struct sr_serial_dev_inst *serial, uint8_t * info)
        uint8_t buf = 0;
        if (serial_read(serial, &buf, 1) != 1)  /* FIXME: Need timeout */
                ret = SR_ERR;
-       *info = buf;
+       if (!info)
+               *info = buf;
 
        sr_dbg("Trigger state is: 0x%x.", *info);
        return ret;
@@ -412,6 +413,7 @@ SR_PRIV int mso_receive_data(int fd, int revents, void *cb_data)
                /* FIXME: Need to do conversion to mV */
                analog_out[i] = (devc->buffer[i * 3] & 0x3f) |
                    ((devc->buffer[i * 3 + 1] & 0xf) << 6);
+               (void)analog_out;
                logic_out[i] = ((devc->buffer[i * 3 + 1] & 0x30) >> 4) |
                    ((devc->buffer[i * 3 + 2] & 0x3f) << 2);
        }
@@ -436,7 +438,7 @@ SR_PRIV int mso_receive_data(int fd, int revents, void *cb_data)
 SR_PRIV int mso_configure_probes(const struct sr_dev_inst *sdi)
 {
        struct dev_context *devc;
-       struct sr_probe *probe;
+       struct sr_channel *probe;
        GSList *l;
        char *tc;
 
@@ -451,7 +453,7 @@ SR_PRIV int mso_configure_probes(const struct sr_dev_inst *sdi)
        devc->use_trigger = FALSE;
 
        for (l = sdi->probes; l; l = l->next) {
-               probe = (struct sr_probe *)l->data;
+               probe = (struct sr_channel *)l->data;
                if (probe->enabled == FALSE)
                        continue;