]> sigrok.org Git - libsigrok.git/blobdiff - hardware/hantek-dso/dso.h
uni-t-dmm/serial-dmm: Handle Voltcraft VC-840 temperature.
[libsigrok.git] / hardware / hantek-dso / dso.h
index 8d543b62921d36608d1ec4602471a269429def8b..eaa37e788f95b2a0241a98157f8b2e9e3aac645b 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * This file is part of the sigrok project.
+ * This file is part of the libsigrok project.
  *
  * Copyright (C) 2012 Bert Vermeulen <bert@biot.com>
  * With protocol information from the hantekdso project,
@@ -55,8 +55,8 @@
 /* Hantek DSO-specific protocol values */
 #define EEPROM_CHANNEL_OFFSETS  0x08
 
+/* All models have this for their "fast" mode. */
 #define FRAMESIZE_SMALL         10240
-#define FRAMESIZE_LARGE         32768
 
 enum control_requests {
        CTRL_READ_EEPROM = 0xa2,
@@ -163,12 +163,12 @@ struct dso_profile {
        uint16_t fw_pid;
        char *vendor;
        char *model;
+       const uint64_t *buffersizes;
        char *firmware;
 };
 
 struct dev_context {
        const struct dso_profile *profile;
-       struct sr_usb_dev_inst *usb;
        void *cb_data;
        uint64_t limit_frames;
        uint64_t num_frames;
@@ -214,12 +214,12 @@ struct dev_context {
 
 SR_PRIV int dso_open(struct sr_dev_inst *sdi);
 SR_PRIV void dso_close(struct sr_dev_inst *sdi);
-SR_PRIV int dso_enable_trigger(struct dev_context *devc);
-SR_PRIV int dso_force_trigger(struct dev_context *devc);
-SR_PRIV int dso_init(struct dev_context *devc);
-SR_PRIV int dso_get_capturestate(struct dev_context *devc,
+SR_PRIV int dso_enable_trigger(const struct sr_dev_inst *sdi);
+SR_PRIV int dso_force_trigger(const struct sr_dev_inst *sdi);
+SR_PRIV int dso_init(const struct sr_dev_inst *sdi);
+SR_PRIV int dso_get_capturestate(const struct sr_dev_inst *sdi,
                uint8_t *capturestate, uint32_t *trigger_offset);
-SR_PRIV int dso_capture_start(struct dev_context *devc);
+SR_PRIV int dso_capture_start(const struct sr_dev_inst *sdi);
 SR_PRIV int dso_get_channeldata(const struct sr_dev_inst *sdi,
                libusb_transfer_cb_fn cb);