#include "protocol.h"
-static const char *manufacturers[] = {
- "HAMEG",
-};
-
static const char *hameg_scpi_dialect[] = {
[SCPI_CMD_GET_DIG_DATA] = ":POD%d:DATA?",
[SCPI_CMD_GET_TIMEBASE] = ":TIM:SCAL?",
- [SCPI_CMD_SET_TIMEBASE] = ":TIM:SCAL %E",
+ [SCPI_CMD_SET_TIMEBASE] = ":TIM:SCAL %s",
[SCPI_CMD_GET_COUPLING] = ":CHAN%d:COUP?",
[SCPI_CMD_SET_COUPLING] = ":CHAN%d:COUP %s",
+ [SCPI_CMD_GET_SAMPLE_RATE] = ":ACQ:SRAT?",
+ [SCPI_CMD_GET_SAMPLE_RATE_LIVE] = ":%s:DATA:POINTS?",
[SCPI_CMD_GET_ANALOG_DATA] = ":CHAN%d:DATA?",
[SCPI_CMD_GET_VERTICAL_DIV] = ":CHAN%d:SCAL?",
- [SCPI_CMD_SET_VERTICAL_DIV] = ":CHAN%d:SCAL %E",
+ [SCPI_CMD_SET_VERTICAL_DIV] = ":CHAN%d:SCAL %s",
[SCPI_CMD_GET_DIG_POD_STATE] = ":POD%d:STAT?",
[SCPI_CMD_SET_DIG_POD_STATE] = ":POD%d:STAT %d",
[SCPI_CMD_GET_TRIGGER_SLOPE] = ":TRIG:A:EDGE:SLOP?",
[SCPI_CMD_SET_DIG_CHAN_STATE] = ":LOG%d:STAT %d",
[SCPI_CMD_GET_VERTICAL_OFFSET] = ":CHAN%d:POS?",
[SCPI_CMD_GET_HORIZ_TRIGGERPOS] = ":TIM:POS?",
- [SCPI_CMD_SET_HORIZ_TRIGGERPOS] = ":TIM:POS %E",
+ [SCPI_CMD_SET_HORIZ_TRIGGERPOS] = ":TIM:POS %s",
[SCPI_CMD_GET_ANALOG_CHAN_STATE] = ":CHAN%d:STAT?",
[SCPI_CMD_SET_ANALOG_CHAN_STATE] = ":CHAN%d:STAT %d",
};
SR_CONF_NUM_TIMEBASE,
SR_CONF_TRIGGER_SLOPE,
SR_CONF_HORIZ_TRIGGERPOS,
+ SR_CONF_SAMPLERATE,
+ SR_CONF_LIMIT_FRAMES,
};
static const int32_t hmo_analog_caps[] = {
"AC",
"ACL",
"DC",
+ "DCL",
"GND",
NULL,
};
{ 10, 1 },
};
-static const char *scope_analog_probe_names[] = {
+static const char *scope_analog_channel_names[] = {
"CH1",
"CH2",
"CH3",
"CH4",
};
-static const char *scope_digital_probe_names[] = {
+static const char *scope_digital_channel_names[] = {
"D0",
"D1",
"D2",
.digital_channels = 8,
.digital_pods = 1,
- .analog_names = &scope_analog_probe_names,
- .digital_names = &scope_digital_probe_names,
+ .analog_names = &scope_analog_channel_names,
+ .digital_names = &scope_digital_channel_names,
.hw_caps = &hmo_hwcaps,
.num_hwcaps = ARRAY_SIZE(hmo_hwcaps),
.digital_channels = 8,
.digital_pods = 1,
- .analog_names = &scope_analog_probe_names,
- .digital_names = &scope_digital_probe_names,
+ .analog_names = &scope_analog_channel_names,
+ .digital_names = &scope_digital_channel_names,
.hw_caps = &hmo_hwcaps,
.num_hwcaps = ARRAY_SIZE(hmo_hwcaps),
},
};
-static int check_manufacturer(const char *manufacturer)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(manufacturers); ++i)
- if (!strcmp(manufacturer, manufacturers[i]))
- return SR_OK;
-
- return SR_ERR;
-}
-
static void scope_state_dump(struct scope_config *config,
struct scope_state *state)
{
unsigned int i;
+ char *tmp;
for (i = 0; i < config->analog_channels; ++i) {
- sr_info("State of analog channel %d -> %s : %s %.3eV %.3e offset", i + 1,
- state->analog_channels[i].state ? "On" : "Off",
+ tmp = sr_voltage_string((*config->vdivs)[state->analog_channels[i].vdiv][0],
+ (*config->vdivs)[state->analog_channels[i].vdiv][1]);
+ sr_info("State of analog channel %d -> %s : %s (coupling) %s (vdiv) %2.2e (offset)",
+ i + 1, state->analog_channels[i].state ? "On" : "Off",
(*config->coupling_options)[state->analog_channels[i].coupling],
- state->analog_channels[i].vdiv, state->analog_channels[i].vertical_offset);
+ tmp, state->analog_channels[i].vertical_offset);
}
for (i = 0; i < config->digital_channels; ++i) {
state->digital_pods[i] ? "On" : "Off");
}
- sr_info("Current timebase: %.2es", state->timebase);
- sr_info("Current trigger: %s (source), %s (slope) %.2e (offset)",
+ tmp = sr_period_string((*config->timebases)[state->timebase][0] *
+ (*config->timebases)[state->timebase][1]);
+ sr_info("Current timebase: %s", tmp);
+ g_free(tmp);
+
+ tmp = sr_samplerate_string(state->sample_rate);
+ sr_info("Current samplerate: %s", tmp);
+ g_free(tmp);
+
+ sr_info("Current trigger: %s (source), %s (slope) %.2f (offset)",
(*config->trigger_sources)[state->trigger_source],
(*config->trigger_slopes)[state->trigger_slope],
state->horiz_triggerpos);
}
-static int scope_state_get_array_option(struct sr_serial_dev_inst *serial,
+static int scope_state_get_array_option(struct sr_scpi_dev_inst *scpi,
const char *command, const char *(*array)[], int *result)
{
char *tmp;
unsigned int i;
- if (sr_scpi_get_string(serial, command, &tmp) != SR_OK) {
+ if (sr_scpi_get_string(scpi, command, &tmp) != SR_OK) {
g_free(tmp);
return SR_ERR;
}
return SR_OK;
}
-static int analog_channel_state_get(struct sr_serial_dev_inst *serial,
+static int analog_channel_state_get(struct sr_scpi_dev_inst *scpi,
struct scope_config *config,
struct scope_state *state)
{
- unsigned int i;
+ unsigned int i, j;
+ float tmp_float;
char command[MAX_COMMAND_SIZE];
for (i = 0; i < config->analog_channels; ++i) {
(*config->scpi_dialect)[SCPI_CMD_GET_ANALOG_CHAN_STATE],
i + 1);
- if (sr_scpi_get_bool(serial, command,
+ if (sr_scpi_get_bool(scpi, command,
&state->analog_channels[i].state) != SR_OK)
return SR_ERR;
(*config->scpi_dialect)[SCPI_CMD_GET_VERTICAL_DIV],
i + 1);
- if (sr_scpi_get_float(serial, command,
- &state->analog_channels[i].vdiv) != SR_OK)
+ if (sr_scpi_get_float(scpi, command, &tmp_float) != SR_OK)
+ return SR_ERR;
+ for (j = 0; j < config->num_vdivs; j++) {
+ if (tmp_float == ((float) (*config->vdivs)[j][0] /
+ (*config->vdivs)[j][1])) {
+ state->analog_channels[i].vdiv = j;
+ break;
+ }
+ }
+ if (i == config->num_vdivs)
return SR_ERR;
g_snprintf(command, sizeof(command),
(*config->scpi_dialect)[SCPI_CMD_GET_VERTICAL_OFFSET],
i + 1);
- if (sr_scpi_get_float(serial, command,
+ if (sr_scpi_get_float(scpi, command,
&state->analog_channels[i].vertical_offset) != SR_OK)
return SR_ERR;
(*config->scpi_dialect)[SCPI_CMD_GET_COUPLING],
i + 1);
- if (scope_state_get_array_option(serial, command, config->coupling_options,
+ if (scope_state_get_array_option(scpi, command, config->coupling_options,
&state->analog_channels[i].coupling) != SR_OK)
return SR_ERR;
}
return SR_OK;
}
-static int digital_channel_state_get(struct sr_serial_dev_inst *serial,
+static int digital_channel_state_get(struct sr_scpi_dev_inst *scpi,
struct scope_config *config,
struct scope_state *state)
{
(*config->scpi_dialect)[SCPI_CMD_GET_DIG_CHAN_STATE],
i);
- if (sr_scpi_get_bool(serial, command,
+ if (sr_scpi_get_bool(scpi, command,
&state->digital_channels[i]) != SR_OK)
return SR_ERR;
}
(*config->scpi_dialect)[SCPI_CMD_GET_DIG_POD_STATE],
i + 1);
- if (sr_scpi_get_bool(serial, command,
+ if (sr_scpi_get_bool(scpi, command,
&state->digital_pods[i]) != SR_OK)
return SR_ERR;
}
return SR_OK;
}
+SR_PRIV int hmo_update_sample_rate(const struct sr_dev_inst *sdi)
+{
+ struct dev_context *devc;
+ struct scope_state *state;
+ struct scope_config *config;
+
+ int tmp;
+ unsigned int i;
+ float tmp_float;
+ gboolean channel_found;
+ char tmp_str[MAX_COMMAND_SIZE];
+ char chan_name[20];
+
+ devc = sdi->priv;
+ config = devc->model_config;
+ state = devc->model_state;
+ channel_found = FALSE;
+
+ for (i = 0; i < config->analog_channels; ++i) {
+ if (state->analog_channels[i].state) {
+ g_snprintf(chan_name, sizeof(chan_name), "CHAN%d", i + 1);
+ g_snprintf(tmp_str, sizeof(tmp_str),
+ (*config->scpi_dialect)[SCPI_CMD_GET_SAMPLE_RATE_LIVE],
+ chan_name);
+ channel_found = TRUE;
+ break;
+ }
+ }
+
+ if (!channel_found) {
+ for (i = 0; i < config->digital_pods; i++) {
+ if (state->digital_pods[i]) {
+ g_snprintf(chan_name, sizeof(chan_name), "POD%d", i);
+ g_snprintf(tmp_str, sizeof(tmp_str),
+ (*config->scpi_dialect)[SCPI_CMD_GET_SAMPLE_RATE_LIVE],
+ chan_name);
+ channel_found = TRUE;
+ break;
+ }
+ }
+ }
+
+ /* No channel is active, ask the instrument for the sample rate
+ * in single shot mode */
+ if (!channel_found) {
+ if (sr_scpi_get_float(sdi->conn,
+ (*config->scpi_dialect)[SCPI_CMD_GET_SAMPLE_RATE],
+ &tmp_float) != SR_OK)
+ return SR_ERR;
+
+ state->sample_rate = tmp_float;
+ } else {
+ if (sr_scpi_get_int(sdi->conn, tmp_str, &tmp) != SR_OK)
+ return SR_ERR;
+ state->sample_rate = tmp / (((float) (*config->timebases)[state->timebase][0] /
+ (*config->timebases)[state->timebase][1]) *
+ config->num_xdivs);
+ }
+
+ return SR_OK;
+}
+
SR_PRIV int hmo_scope_state_get(struct sr_dev_inst *sdi)
{
struct dev_context *devc;
struct scope_state *state;
struct scope_config *config;
+ float tmp_float;
+ unsigned int i;
devc = sdi->priv;
config = devc->model_config;
state = devc->model_state;
+ sr_info("Fetching scope state");
+
if (analog_channel_state_get(sdi->conn, config, state) != SR_OK)
return SR_ERR;
if (digital_channel_state_get(sdi->conn, config, state) != SR_OK)
return SR_ERR;
- /* TODO: Check if value is sensible. */
if (sr_scpi_get_float(sdi->conn,
(*config->scpi_dialect)[SCPI_CMD_GET_TIMEBASE],
- &state->timebase) != SR_OK)
+ &tmp_float) != SR_OK)
+ return SR_ERR;
+
+ for (i = 0; i < config->num_timebases; i++) {
+ if (tmp_float == ((float) (*config->timebases)[i][0] /
+ (*config->timebases)[i][1])) {
+ state->timebase = i;
+ break;
+ }
+ }
+ if (i == config->num_timebases)
return SR_ERR;
if (sr_scpi_get_float(sdi->conn,
(*config->scpi_dialect)[SCPI_CMD_GET_HORIZ_TRIGGERPOS],
- &state->horiz_triggerpos) != SR_OK)
+ &tmp_float) != SR_OK)
return SR_ERR;
+ state->horiz_triggerpos = tmp_float /
+ (((double) (*config->timebases)[state->timebase][0] /
+ (*config->timebases)[state->timebase][1]) * config->num_xdivs);
+ state->horiz_triggerpos -= 0.5;
+ state->horiz_triggerpos *= -1;
if (scope_state_get_array_option(sdi->conn,
(*config->scpi_dialect)[SCPI_CMD_GET_TRIGGER_SOURCE],
config->trigger_slopes, &state->trigger_slope) != SR_OK)
return SR_ERR;
+ if (hmo_update_sample_rate(sdi) != SR_OK)
+ return SR_ERR;
+
+ sr_info("Fetching finished.");
+
scope_state_dump(config, state);
return SR_OK;
}
-SR_PRIV struct scope_state *scope_state_new(struct scope_config *config)
+static struct scope_state *scope_state_new(struct scope_config *config)
{
struct scope_state *state;
char tmp[25];
int model_index;
unsigned int i, j;
- struct sr_probe *probe;
+ struct sr_channel *ch;
struct dev_context *devc;
devc = sdi->priv;
return SR_ERR_NA;
}
- if (!(devc->analog_groups = g_try_malloc0(sizeof(struct sr_probe_group) *
+ if (!(devc->analog_groups = g_try_malloc0(sizeof(struct sr_channel_group) *
scope_models[model_index].analog_channels)))
return SR_ERR_MALLOC;
- if (!(devc->digital_groups = g_try_malloc0(sizeof(struct sr_probe_group) *
+ if (!(devc->digital_groups = g_try_malloc0(sizeof(struct sr_channel_group) *
scope_models[model_index].digital_pods)))
return SR_ERR_MALLOC;
/* Add analog channels. */
for (i = 0; i < scope_models[model_index].analog_channels; i++) {
- if (!(probe = sr_probe_new(i, SR_PROBE_ANALOG, TRUE,
+ if (!(ch = sr_probe_new(i, SR_PROBE_ANALOG, TRUE,
(*scope_models[model_index].analog_names)[i])))
return SR_ERR_MALLOC;
- sdi->probes = g_slist_append(sdi->probes, probe);
+ sdi->channels = g_slist_append(sdi->channels, ch);
devc->analog_groups[i].name =
(char *)(*scope_models[model_index].analog_names)[i];
- devc->analog_groups[i].probes = g_slist_append(NULL, probe);
+ devc->analog_groups[i].channels = g_slist_append(NULL, ch);
- sdi->probe_groups = g_slist_append(sdi->probe_groups,
+ sdi->channel_groups = g_slist_append(sdi->channel_groups,
&devc->analog_groups[i]);
}
- /* Add digital probe groups. */
+ /* Add digital channel groups. */
for (i = 0; i < scope_models[model_index].digital_pods; ++i) {
g_snprintf(tmp, 25, "POD%d", i);
devc->digital_groups[i].name = g_strdup(tmp);
- sdi->probe_groups = g_slist_append(sdi->probe_groups,
+ sdi->channel_groups = g_slist_append(sdi->channel_groups,
&devc->digital_groups[i < 8 ? 0 : 1]);
}
/* Add digital channels. */
for (i = 0; i < scope_models[model_index].digital_channels; i++) {
- if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE,
+ if (!(ch = sr_probe_new(i, SR_PROBE_LOGIC, TRUE,
(*scope_models[model_index].digital_names)[i])))
return SR_ERR_MALLOC;
- sdi->probes = g_slist_append(sdi->probes, probe);
+ sdi->channels = g_slist_append(sdi->channels, ch);
- devc->digital_groups[i < 8 ? 0 : 1].probes = g_slist_append(
- devc->digital_groups[i < 8 ? 0 : 1].probes, probe);
+ devc->digital_groups[i < 8 ? 0 : 1].channels = g_slist_append(
+ devc->digital_groups[i < 8 ? 0 : 1].channels, ch);
}
devc->model_config = &scope_models[model_index];
return SR_OK;
}
-SR_PRIV struct sr_dev_inst *hmo_probe_serial_device(const char *serial_device,
- const char *serial_options)
-{
- struct sr_dev_inst *sdi;
- struct dev_context *devc;
- struct sr_scpi_hw_info *hw_info;
- struct sr_serial_dev_inst *serial;
-
- sdi = NULL;
- devc = NULL;
- serial = NULL;
- hw_info = NULL;
-
- if (!(serial = sr_serial_dev_inst_new(serial_device, serial_options)))
- goto fail;
-
- sr_info("Probing %s.", serial_device);
- if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
- goto fail;
-
- if (sr_scpi_get_hw_id(serial, &hw_info) != SR_OK) {
- sr_info("Couldn't get IDN response.");
- goto fail;
- }
-
- if (check_manufacturer(hw_info->manufacturer) != SR_OK)
- goto fail;
-
- if (!(sdi = sr_dev_inst_new(0, SR_ST_ACTIVE,
- hw_info->manufacturer, hw_info->model,
- hw_info->firmware_version))) {
- goto fail;
- }
- sr_scpi_hw_info_free(hw_info);
- hw_info = NULL;
-
- if (!(devc = g_try_malloc0(sizeof(struct dev_context))))
- goto fail;
-
- sdi->driver = di;
- sdi->priv = devc;
- sdi->inst_type = SR_INST_SERIAL;
- sdi->conn = serial;
-
- if (hmo_init_device(sdi) != SR_OK)
- goto fail;
-
- return sdi;
-
-fail:
- if (hw_info)
- sr_scpi_hw_info_free(hw_info);
- if (serial)
- sr_serial_dev_inst_free(serial);
- if (sdi)
- sr_dev_inst_free(sdi);
- if (devc)
- g_free(devc);
-
- return NULL;
-}
-
SR_PRIV int hmo_receive_data(int fd, int revents, void *cb_data)
{
- struct sr_probe *probe;
+ struct sr_channel *ch;
struct sr_dev_inst *sdi;
struct dev_context *devc;
struct sr_datafeed_packet packet;
return TRUE;
if (revents == G_IO_IN) {
- probe = devc->current_probe->data;
+ ch = devc->current_channel->data;
- switch (probe->type) {
+ switch (ch->type) {
case SR_PROBE_ANALOG:
if (sr_scpi_get_floatv(sdi->conn, NULL, &data) != SR_OK) {
if (data)
packet.type = SR_DF_FRAME_BEGIN;
sr_session_send(sdi, &packet);
- analog.probes = g_slist_append(NULL, probe);
+ analog.channels = g_slist_append(NULL, ch);
analog.num_samples = data->len;
analog.data = (float *) data->data;
analog.mq = SR_MQ_VOLTAGE;
packet.type = SR_DF_ANALOG;
packet.payload = &analog;
sr_session_send(cb_data, &packet);
- g_slist_free(analog.probes);
+ g_slist_free(analog.channels);
g_array_free(data, TRUE);
break;
case SR_PROBE_LOGIC:
g_array_free(data, TRUE);
break;
default:
- sr_err("Invalid probe type.");
+ sr_err("Invalid channel type.");
break;
}
packet.type = SR_DF_FRAME_END;
sr_session_send(sdi, &packet);
- if (devc->current_probe->next) {
- devc->current_probe = devc->current_probe->next;
+ if (devc->current_channel->next) {
+ devc->current_channel = devc->current_channel->next;
hmo_request_data(sdi);
} else if (++devc->num_frames == devc->frame_limit) {
- packet.type = SR_DF_END;
- sr_session_send(sdi, &packet);
sdi->driver->dev_acquisition_stop(sdi, cb_data);
} else {
- devc->current_probe = devc->enabled_probes;
+ devc->current_channel = devc->enabled_channels;
hmo_request_data(sdi);
}
}