*/
#include <string.h>
-
#include "protocol.h"
/* Serial communication parameters for Metrahit 1x/2x with 'RS232' adaptor */
SR_CONF_CONTINUOUS,
};
-/** Driver init function */
static int init_1x_2x_rs232(struct sr_context *sr_ctx)
{
return std_init(sr_ctx, &gmc_mh_1x_2x_rs232_driver_info, LOG_PREFIX);
}
-
-/** Read single byte from serial port.
- * \retval -1 Timeout or error.
- * \retval other Byte.
+/**
+ * Read single byte from serial port.
+ *
+ * @retval -1 Timeout or error.
+ * @retval other Byte.
*/
static int read_byte(struct sr_serial_dev_inst *serial, gint64 timeout)
{
- guint8 result = 0;
+ uint8_t result = 0;
int rc = 0;
for (;;) {
}
}
-/** Try to detect GMC 1x/2x multimeter model in send mode for max. 1 second.
- * \param serial Configured, open serial port.
+/**
+ * Try to detect GMC 1x/2x multimeter model in send mode for max. 1 second.
*
- * \retval NULL Detection failed.
- * \retval other Model code.
+ * @param serial Configured, open serial port.
+ *
+ * @retval NULL Detection failed.
+ * @retval other Model code.
*/
static enum model scan_model_sm(struct sr_serial_dev_inst *serial)
{
gint64 timeout_us;
model = SR_METRAHIT_NONE;
- timeout_us = g_get_monotonic_time() + 1*1000*1000;
+ timeout_us = g_get_monotonic_time() + 1 * 1000 * 1000;
- /* Try to find message consisting of device code and several
- * (at least 4) data bytes. */
+ /*
+ * Try to find message consisting of device code and several
+ * (at least 4) data bytes.
+ */
for (bytecnt = 0; bytecnt < 100; bytecnt++) {
byte = read_byte(serial, timeout_us);
if ((byte == -1) || (timeout_us < g_get_monotonic_time()))
if ((byte & MSGID_MASK) == MSGID_INF) {
if (!(model = sr_gmc_decode_model_sm(byte & MSGC_MASK)))
break;
- /* Now expect (at least) 4 data bytes */
+ /* Now expect (at least) 4 data bytes. */
for (cnt = 0; cnt < 4; cnt++) {
byte = read_byte(serial, timeout_us);
if ((byte == -1) ||
return model;
}
-/** Scan for Metrahit 1x and Metrahit 2x in send mode using Gossen Metrawatt
- * 'RS232' interface. The older 1x models use 8192 and the newer 2x 9600 baud.
- * The DMM usually sends up to about 20 messages per second. However, depending
- * on configuration and measurement mode the intervals can be much larger and
- * then the detection might not work.
+/**
+ * Scan for Metrahit 1x and Metrahit 2x in send mode using Gossen Metrawatt
+ * 'RS232' interface.
+ *
+ * The older 1x models use 8192 baud and the newer 2x 9600 baud.
+ * The DMM usually sends up to about 20 messages per second. However, depending
+ * on configuration and measurement mode the intervals can be much larger and
+ * then the detection might not work.
*/
static GSList *scan_1x_2x_rs232(GSList *options)
{
model = scan_model_sm(serial);
- /* If detection failed and no user-supplied parameters,
- * try second baud rate. */
+ /*
+ * If detection failed and no user-supplied parameters,
+ * try second baud rate.
+ */
if ((model == SR_METRAHIT_NONE) && !serialcomm_given) {
serialcomm = SERIALCOMM_1X_RS232;
g_free(serial->serialcomm);
return devices;
}
-/** Driver device list function */
static GSList *dev_list_1x_2x_rs232(void)
{
return ((struct drv_context *)(gmc_mh_1x_2x_rs232_driver_info.priv))
}
static int dev_acq_start_1x_2x_rs232(const struct sr_dev_inst *sdi,
- void *cb_data)
+ void *cb_data)
{
struct dev_context *devc;
struct sr_serial_dev_inst *serial;