#include <string.h>
#include <stdlib.h>
#include <glib.h>
+#include <glib/gstdio.h>
#include <libserialport.h>
#include "libsigrok.h"
#include "libsigrok-internal.h"
-/* Message logging helpers with subsystem-specific prefix string. */
-#define LOG_PREFIX "serial: "
-#define sr_log(l, s, args...) sr_log(l, LOG_PREFIX s, ## args)
-#define sr_spew(s, args...) sr_spew(LOG_PREFIX s, ## args)
-#define sr_dbg(s, args...) sr_dbg(LOG_PREFIX s, ## args)
-#define sr_info(s, args...) sr_info(LOG_PREFIX s, ## args)
-#define sr_warn(s, args...) sr_warn(LOG_PREFIX s, ## args)
-#define sr_err(s, args...) sr_err(LOG_PREFIX s, ## args)
+#define LOG_PREFIX "serial"
/**
* Open the specified serial port.
*
* @param serial Previously initialized serial port structure.
- * @param flags Flags to use when opening the serial port. Possible flags
+ * @param[in] flags Flags to use when opening the serial port. Possible flags
* include SERIAL_RDWR, SERIAL_RDONLY, SERIAL_NONBLOCK.
*
* If the serial structure contains a serialcomm string, it will be
* passed to serial_set_paramstr() after the port is opened.
*
- * @return SR_OK on success, SR_ERR on failure.
+ * @retval SR_OK Success.
+ * @retval SR_ERR Failure.
*/
SR_PRIV int serial_open(struct sr_serial_dev_inst *serial, int flags)
{
int ret;
char *error;
+ int sp_flags = 0;
if (!serial) {
sr_dbg("Invalid serial port.");
sp_get_port_by_name(serial->port, &serial->data);
- ret = sp_open(serial->data, flags);
+ if (flags & SERIAL_RDWR)
+ sp_flags = (SP_MODE_READ | SP_MODE_WRITE);
+ else if (flags & SERIAL_RDONLY)
+ sp_flags = SP_MODE_READ;
+
+ serial->nonblocking = (flags & SERIAL_NONBLOCK) ? 1 : 0;
+
+ ret = sp_open(serial->data, sp_flags);
switch (ret) {
case SP_ERR_ARG:
return SR_ERR_ARG;
case SP_ERR_FAIL:
error = sp_last_error_message();
- sr_err("Error opening port: %s.", error);
+ sr_err("Error opening port (%d): %s.",
+ sp_last_error_code(), error);
sp_free_error_message(error);
return SR_ERR;
}
-#ifndef _WIN32
- serial->fd = serial->data->fd;
-#endif
-
if (serial->serialcomm)
return serial_set_paramstr(serial, serial->serialcomm);
else
*
* @param serial Previously initialized serial port structure.
*
- * @return SR_OK on success, SR_ERR on failure.
+ * @retval SR_OK Success.
+ * @retval SR_ERR Failure.
*/
SR_PRIV int serial_close(struct sr_serial_dev_inst *serial)
{
return SR_ERR;
}
- if (serial->fd == -1) {
- sr_dbg("Cannot close unopened serial port %s (fd %d).",
- serial->port, serial->fd);
+ if (!serial->data) {
+ sr_dbg("Cannot close unopened serial port %s.", serial->port);
return SR_ERR;
}
- sr_spew("Closing serial port %s (fd %d).", serial->port, serial->fd);
+ sr_spew("Closing serial port %s.", serial->port);
ret = sp_close(serial->data);
return SR_ERR_ARG;
case SP_ERR_FAIL:
error = sp_last_error_message();
- sr_err("Error closing port: %s.", error);
+ sr_err("Error closing port (%d): %s.",
+ sp_last_error_code(), error);
sp_free_error_message(error);
return SR_ERR;
}
- serial->fd = -1;
+ sp_free_port(serial->data);
+ serial->data = NULL;
return SR_OK;
}
*
* @param serial Previously initialized serial port structure.
*
- * @return SR_OK on success, SR_ERR on failure.
+ * @retval SR_OK Success.
+ * @retval SR_ERR Failure.
*/
SR_PRIV int serial_flush(struct sr_serial_dev_inst *serial)
{
return SR_ERR;
}
- if (serial->fd == -1) {
- sr_dbg("Cannot flush unopened serial port %s (fd %d).",
- serial->port, serial->fd);
+ if (!serial->data) {
+ sr_dbg("Cannot flush unopened serial port %s.", serial->port);
return SR_ERR;
}
- sr_spew("Flushing serial port %s (fd %d).", serial->port, serial->fd);
+ sr_spew("Flushing serial port %s.", serial->port);
- ret = sp_flush(serial->data);
+ ret = sp_flush(serial->data, SP_BUF_BOTH);
switch (ret) {
case SP_ERR_ARG:
return SR_ERR_ARG;
case SP_ERR_FAIL:
error = sp_last_error_message();
- sr_err("Error flushing port: %s.", error);
+ sr_err("Error flushing port (%d): %s.",
+ sp_last_error_code(), error);
sp_free_error_message(error);
return SR_ERR;
}
return SR_OK;
}
-/**
- * Write a number of bytes to the specified serial port.
- *
- * @param serial Previously initialized serial port structure.
- * @param buf Buffer containing the bytes to write.
- * @param count Number of bytes to write.
- *
- * @return The number of bytes written, or a negative error code upon failure.
- */
-SR_PRIV int serial_write(struct sr_serial_dev_inst *serial,
- const void *buf, size_t count)
+static int _serial_write(struct sr_serial_dev_inst *serial,
+ const void *buf, size_t count, int nonblocking)
{
ssize_t ret;
char *error;
return SR_ERR;
}
- if (serial->fd == -1) {
- sr_dbg("Cannot use unopened serial port %s (fd %d).",
- serial->port, serial->fd);
+ if (!serial->data) {
+ sr_dbg("Cannot use unopened serial port %s.", serial->port);
return SR_ERR;
}
- ret = sp_write(serial->data, buf, count);
+ if (nonblocking)
+ ret = sp_nonblocking_write(serial->data, buf, count);
+ else
+ ret = sp_blocking_write(serial->data, buf, count, 0);
switch (ret) {
case SP_ERR_ARG:
return SR_ERR_ARG;
case SP_ERR_FAIL:
error = sp_last_error_message();
- sr_err("Write error: %s.", error);
+ sr_err("Write error (%d): %s.", sp_last_error_code(), error);
sp_free_error_message(error);
return SR_ERR;
}
- sr_spew("Wrote %d/%d bytes (fd %d).", ret, count, serial->fd);
+ sr_spew("Wrote %d/%d bytes.", ret, count);
return ret;
}
/**
- * Read a number of bytes from the specified serial port.
+ * Write a number of bytes to the specified serial port.
*
* @param serial Previously initialized serial port structure.
- * @param buf Buffer where to store the bytes that are read.
- * @param count The number of bytes to read.
+ * @param[in] buf Buffer containing the bytes to write.
+ * @param[in] count Number of bytes to write.
*
- * @return The number of bytes read, or a negative error code upon failure.
+ * @retval SR_ERR_ARG Invalid argument.
+ * @retval SR_ERR Other error.
+ * @retval other The number of bytes written.
*/
-SR_PRIV int serial_read(struct sr_serial_dev_inst *serial, void *buf,
- size_t count)
+SR_PRIV int serial_write(struct sr_serial_dev_inst *serial,
+ const void *buf, size_t count)
+{
+ return _serial_write(serial, buf, count, serial->nonblocking);
+}
+
+/**
+ * Write a number of bytes to the specified serial port, blocking until finished.
+ * @copydetails serial_write()
+ */
+SR_PRIV int serial_write_blocking(struct sr_serial_dev_inst *serial,
+ const void *buf, size_t count)
+{
+ return _serial_write(serial, buf, count, 0);
+}
+
+/**
+ * Write a number of bytes to the specified serial port, return immediately.
+ * @copydetails serial_write()
+*/
+SR_PRIV int serial_write_nonblocking(struct sr_serial_dev_inst *serial,
+ const void *buf, size_t count)
+{
+ return _serial_write(serial, buf, count, 1);
+}
+
+static int _serial_read(struct sr_serial_dev_inst *serial, void *buf,
+ size_t count, int nonblocking)
{
ssize_t ret;
char *error;
return SR_ERR;
}
- if (serial->fd == -1) {
- sr_dbg("Cannot use unopened serial port %s (fd %d).",
- serial->port, serial->fd);
+ if (!serial->data) {
+ sr_dbg("Cannot use unopened serial port %s.", serial->port);
return SR_ERR;
}
- ret = sp_read(serial->data, buf, count);
+ if (nonblocking)
+ ret = sp_nonblocking_read(serial->data, buf, count);
+ else
+ ret = sp_blocking_read(serial->data, buf, count, 0);
switch (ret) {
case SP_ERR_ARG:
sr_err("Attempted serial port read with invalid arguments.");
return SR_ERR_ARG;
- // Temporarily disabled, will come back later.
- // case SP_ERR_FAIL:
- // error = sp_last_error_message();
- // sr_err("Read error: %s.", error);
- // sp_free_error_message(error);
- // return SR_ERR;
+ case SP_ERR_FAIL:
+ error = sp_last_error_message();
+ sr_err("Read error (%d): %s.", sp_last_error_code(), error);
+ sp_free_error_message(error);
+ return SR_ERR;
}
- sr_spew("Read %d/%d bytes (fd %d).", ret, count, serial->fd);
+ if (ret > 0)
+ sr_spew("Read %d/%d bytes.", ret, count);
return ret;
}
+/**
+ * Read a number of bytes from the specified serial port.
+ *
+ * @param serial Previously initialized serial port structure.
+ * @param buf Buffer where to store the bytes that are read.
+ * @param[in] count The number of bytes to read.
+ *
+ * @retval SR_ERR_ARG Invalid argument.
+ * @retval SR_ERR Other error.
+ * @retval other The number of bytes read.
+ */
+SR_PRIV int serial_read(struct sr_serial_dev_inst *serial, void *buf,
+ size_t count)
+{
+ return _serial_read(serial, buf, count, serial->nonblocking);
+}
+
+/**
+ * Read a number of bytes from the specified serial port, block until finished.
+ * @copydetails serial_read()
+ */
+SR_PRIV int serial_read_blocking(struct sr_serial_dev_inst *serial, void *buf,
+ size_t count)
+{
+ return _serial_read(serial, buf, count, 0);
+}
+
+/**
+ * Try to read up to @a count bytes from the specified serial port, return
+ * immediately with what's available.
+ * @copydetails serial_read()
+ */
+SR_PRIV int serial_read_nonblocking(struct sr_serial_dev_inst *serial, void *buf,
+ size_t count)
+{
+ return _serial_read(serial, buf, count, 1);
+}
+
/**
* Set serial parameters for the specified serial port.
*
* @param serial Previously initialized serial port structure.
- * @param baudrate The baudrate to set.
- * @param bits The number of data bits to use.
- * @param parity The parity setting to use (0 = none, 1 = even, 2 = odd).
- * @param stopbits The number of stop bits to use (1 or 2).
- * @param flowcontrol The flow control settings to use (0 = none, 1 = RTS/CTS,
- * 2 = XON/XOFF).
+ * @param[in] baudrate The baudrate to set.
+ * @param[in] bits The number of data bits to use (5, 6, 7 or 8).
+ * @param[in] parity The parity setting to use (0 = none, 1 = even, 2 = odd).
+ * @param[in] stopbits The number of stop bits to use (1 or 2).
+ * @param[in] flowcontrol The flow control settings to use (0 = none,
+ * 1 = RTS/CTS, 2 = XON/XOFF).
+ * @param[in] rts Status of RTS line (0 or 1; required by some interfaces).
+ * @param[in] dtr Status of DTR line (0 or 1; required by some interfaces).
*
- * @return SR_OK upon success, SR_ERR upon failure.
+ * @retval SR_OK Success.
+ * @retval SR_ERR Failure.
*/
SR_PRIV int serial_set_params(struct sr_serial_dev_inst *serial, int baudrate,
int bits, int parity, int stopbits,
{
int ret;
char *error;
+ struct sp_port_config *config;
if (!serial) {
sr_dbg("Invalid serial port.");
return SR_ERR;
}
- if (serial->fd == -1) {
- sr_dbg("Cannot configure unopened serial port %s (fd %d).",
- serial->port, serial->fd);
+ if (!serial->data) {
+ sr_dbg("Cannot configure unopened serial port %s.", serial->port);
return SR_ERR;
}
- sr_spew("Setting serial parameters on port %s (fd %d).", serial->port,
- serial->fd);
+ sr_spew("Setting serial parameters on port %s.", serial->port);
+
+ sp_new_config(&config);
+ sp_set_config_baudrate(config, baudrate);
+ sp_set_config_bits(config, bits);
+ switch (parity) {
+ case 0:
+ sp_set_config_parity(config, SP_PARITY_NONE);
+ break;
+ case 1:
+ sp_set_config_parity(config, SP_PARITY_EVEN);
+ break;
+ case 2:
+ sp_set_config_parity(config, SP_PARITY_ODD);
+ break;
+ default:
+ return SR_ERR_ARG;
+ }
+ sp_set_config_stopbits(config, stopbits);
+ sp_set_config_rts(config, flowcontrol == 1 ? SP_RTS_FLOW_CONTROL : rts);
+ sp_set_config_cts(config, flowcontrol == 1 ? SP_CTS_FLOW_CONTROL : SP_CTS_IGNORE);
+ sp_set_config_dtr(config, dtr);
+ sp_set_config_dsr(config, SP_DSR_IGNORE);
+ sp_set_config_xon_xoff(config, flowcontrol == 2 ? SP_XONXOFF_INOUT : SP_XONXOFF_DISABLED);
- ret = sp_set_params(serial->data, baudrate, bits, parity, stopbits,
- flowcontrol, rts, dtr);
+ ret = sp_set_config(serial->data, config);
+ sp_free_config(config);
switch (ret) {
case SP_ERR_ARG:
return SR_ERR_ARG;
case SP_ERR_FAIL:
error = sp_last_error_message();
- sr_err("Error setting serial port parameters: %s.", error);
+ sr_err("Error setting serial port parameters (%d): %s.",
+ sp_last_error_code(), error);
sp_free_error_message(error);
return SR_ERR;
}
}
/**
- * Set serial parameters for the specified serial port.
+ * Set serial parameters for the specified serial port from parameter string.
*
* @param serial Previously initialized serial port structure.
- * @param paramstr A serial communication parameters string, in the form
- * of <speed>/<data bits><parity><stopbits><flow>, for example "9600/8n1" or
- * "600/7o2" or "460800/8n1/flow=2" where flow is 0 for none, 1 for rts/cts and 2 for xon/xoff.
- *
- * @return SR_OK upon success, SR_ERR upon failure.
+ * @param[in] paramstr A serial communication parameters string of the form
+ * "<baudrate>/<bits><parity><stopbits>{/<option>}".\n
+ * Examples: "9600/8n1", "600/7o2/dtr=1/rts=0" or "460800/8n1/flow=2".\n
+ * \<baudrate\>=integer Baud rate.\n
+ * \<bits\>=5|6|7|8 Number of data bits.\n
+ * \<parity\>=n|e|o None, even, odd.\n
+ * \<stopbits\>=1|2 One or two stop bits.\n
+ * Options:\n
+ * dtr=0|1 Set DTR off resp. on.\n
+ * flow=0|1|2 Flow control. 0 for none, 1 for RTS/CTS, 2 for XON/XOFF.\n
+ * rts=0|1 Set RTS off resp. on.\n
+ * Please note that values and combinations of these parameters must be
+ * supported by the concrete serial interface hardware and the drivers for it.
+ * @retval SR_OK Success.
+ * @retval SR_ERR Failure.
*/
-#define SERIAL_COMM_SPEC "^(\\d+)/([78])([neo])([12])(.*)$"
SR_PRIV int serial_set_paramstr(struct sr_serial_dev_inst *serial,
const char *paramstr)
{
+#define SERIAL_COMM_SPEC "^(\\d+)/([5678])([neo])([12])(.*)$"
+
GRegex *reg;
GMatchInfo *match;
int speed, databits, parity, stopbits, flow, rts, dtr, i;
* @param serial Previously initialized serial port structure.
* @param buf Buffer where to store the bytes that are read.
* @param buflen Size of the buffer.
- * @param timeout_ms How long to wait for a line to come in.
+ * @param[in] timeout_ms How long to wait for a line to come in.
*
* Reading stops when CR of LR is found, which is stripped from the buffer.
*
- * @return SR_OK on success, SR_ERR on failure.
+ * @retval SR_OK Success.
+ * @retval SR_ERR Failure.
*/
SR_PRIV int serial_readline(struct sr_serial_dev_inst *serial, char **buf,
int *buflen, gint64 timeout_ms)
gint64 start;
int maxlen, len;
- if (!serial || serial->fd == -1) {
+ if (!serial) {
sr_dbg("Invalid serial port.");
return SR_ERR;
}
- if (serial->fd == -1) {
- sr_dbg("Cannot use unopened serial port %s (fd %d).",
- serial->port, serial->fd);
+ if (!serial->data) {
+ sr_dbg("Cannot use unopened serial port %s.", serial->port);
return -1;
}
*
* @param serial Previously initialized serial port structure.
* @param buf Buffer containing the bytes to write.
- * @param count Size of the buffer.
- * @param packet_size Size, in bytes, of a valid packet.
+ * @param buflen Size of the buffer.
+ * @param[in] packet_size Size, in bytes, of a valid packet.
* @param is_valid Callback that assesses whether the packet is valid or not.
- * @param timeout_ms The timeout after which, if no packet is detected, to
+ * @param[in] timeout_ms The timeout after which, if no packet is detected, to
* abort scanning.
- * @param baudrate The baudrate of the serial port. This parameter is not
+ * @param[in] baudrate The baudrate of the serial port. This parameter is not
* critical, but it helps fine tune the serial port polling
* delay.
*
- * @return SR_OK if a valid packet is found within the given timeout,
- * SR_ERR upon failure.
+ * @retval SR_OK Valid packet was found within the given timeout.
+ * @retval SR_ERR Failure.
*/
SR_PRIV int serial_stream_detect(struct sr_serial_dev_inst *serial,
uint8_t *buf, size_t *buflen,
- size_t packet_size, packet_valid_t is_valid,
+ size_t packet_size,
+ packet_valid_callback is_valid,
uint64_t timeout_ms, int baudrate)
{
uint64_t start, time, byte_delay_us;
maxlen = *buflen;
- sr_dbg("Detecting packets on FD %d (timeout = %" PRIu64
- "ms, baudrate = %d).", serial->fd, timeout_ms, baudrate);
+ sr_dbg("Detecting packets on %s (timeout = %" PRIu64
+ "ms, baudrate = %d).", serial->port, timeout_ms, baudrate);
if (maxlen < (packet_size / 2) ) {
sr_err("Buffer size must be at least twice the packet size.");
return SR_ERR;
}
+
+/**
+ * Extract the serial device and options from the options linked list.
+ *
+ * @param options List of options passed from the command line.
+ * @param serial_device Pointer where to store the exctracted serial device.
+ * @param serial_options Pointer where to store the optional extracted serial
+ * options.
+ *
+ * @return SR_OK if a serial_device is found, SR_ERR if no device is found. The
+ * returned string should not be freed by the caller.
+ */
+SR_PRIV int sr_serial_extract_options(GSList *options, const char **serial_device,
+ const char **serial_options)
+{
+ GSList *l;
+ struct sr_config *src;
+
+ *serial_device = NULL;
+
+ for (l = options; l; l = l->next) {
+ src = l->data;
+ switch (src->key) {
+ case SR_CONF_CONN:
+ *serial_device = g_variant_get_string(src->data, NULL);
+ sr_dbg("Parsed serial device: %s", *serial_device);
+ break;
+
+ case SR_CONF_SERIALCOMM:
+ *serial_options = g_variant_get_string(src->data, NULL);
+ sr_dbg("Parsed serial options: %s", *serial_options);
+ break;
+ }
+ }
+
+ if (!*serial_device) {
+ sr_dbg("No serial device specified");
+ return SR_ERR;
+ }
+
+ return SR_OK;
+}
+
+#ifdef _WIN32
+typedef HANDLE event_handle;
+#else
+typedef int event_handle;
+#endif
+
+SR_PRIV int serial_source_add(struct sr_serial_dev_inst *serial, int events,
+ int timeout, sr_receive_data_callback cb, void *cb_data)
+{
+ enum sp_event mask = 0;
+ unsigned int i;
+
+ if (sp_new_event_set(&serial->event_set) != SP_OK)
+ return SR_ERR;
+
+ if (events & G_IO_IN)
+ mask |= SP_EVENT_RX_READY;
+ if (events & G_IO_OUT)
+ mask |= SP_EVENT_TX_READY;
+ if (events & G_IO_ERR)
+ mask |= SP_EVENT_ERROR;
+
+ if (sp_add_port_events(serial->event_set, serial->data, mask) != SP_OK) {
+ sp_free_event_set(serial->event_set);
+ return SR_ERR;
+ }
+
+ serial->pollfds = (GPollFD *) g_malloc0(sizeof(GPollFD) * serial->event_set->count);
+
+ for (i = 0; i < serial->event_set->count; i++) {
+
+ serial->pollfds[i].fd = ((event_handle *) serial->event_set->handles)[i];
+
+ mask = serial->event_set->masks[i];
+
+ if (mask & SP_EVENT_RX_READY)
+ serial->pollfds[i].events |= G_IO_IN;
+ if (mask & SP_EVENT_TX_READY)
+ serial->pollfds[i].events |= G_IO_OUT;
+ if (mask & SP_EVENT_ERROR)
+ serial->pollfds[i].events |= G_IO_ERR;
+
+ if (sr_source_add_pollfd(&serial->pollfds[i],
+ timeout, cb, cb_data) != SR_OK)
+ return SR_ERR;
+ }
+
+ return SR_OK;
+}
+
+SR_PRIV int serial_source_remove(struct sr_serial_dev_inst *serial)
+{
+ unsigned int i;
+
+ for (i = 0; i < serial->event_set->count; i++)
+ if (sr_source_remove_pollfd(&serial->pollfds[i]) != SR_OK)
+ return SR_ERR;
+
+ g_free(serial->pollfds);
+ sp_free_event_set(serial->event_set);
+
+ serial->pollfds = NULL;
+ serial->event_set = NULL;
+
+ return SR_OK;
+}
+
+/**
+ * Find USB serial devices via the USB vendor ID and product ID.
+ *
+ * @param[in] vendor_id Vendor ID of the USB device.
+ * @param[in] product_id Product ID of the USB device.
+ *
+ * @return A GSList of strings containing the path of the serial device or
+ * NULL if no serial device is found. The returned list must be freed
+ * by the caller.
+ */
+SR_PRIV GSList *sr_serial_find_usb(uint16_t vendor_id, uint16_t product_id)
+{
+#ifdef __linux__
+ const gchar *usb_dev;
+ const char device_tree[] = "/sys/bus/usb/devices/";
+ GDir *devices_dir, *device_dir;
+ GSList *l = NULL;
+ GSList *tty_devs;
+ GSList *matched_paths;
+ FILE *fd;
+ char tmp[5];
+ gchar *vendor_path, *product_path, *path_copy;
+ gchar *prefix, *subdir_path, *device_path, *tty_path;
+ unsigned long read_vendor_id, read_product_id;
+ const char *file;
+
+ l = NULL;
+ tty_devs = NULL;
+ matched_paths = NULL;
+
+ if (!(devices_dir = g_dir_open(device_tree, 0, NULL)))
+ return NULL;
+
+ /*
+ * Find potential candidates using the vendor ID and product ID
+ * and store them in matched_paths.
+ */
+ while ((usb_dev = g_dir_read_name(devices_dir))) {
+ vendor_path = g_strconcat(device_tree,
+ usb_dev, "/idVendor", NULL);
+ product_path = g_strconcat(device_tree,
+ usb_dev, "/idProduct", NULL);
+
+ if (!g_file_test(vendor_path, G_FILE_TEST_EXISTS) ||
+ !g_file_test(product_path, G_FILE_TEST_EXISTS))
+ goto skip_device;
+
+ if ((fd = g_fopen(vendor_path, "r")) == NULL)
+ goto skip_device;
+
+ if (fgets(tmp, sizeof(tmp), fd) == NULL) {
+ fclose(fd);
+ goto skip_device;
+ }
+ read_vendor_id = strtoul(tmp, NULL, 16);
+
+ fclose(fd);
+
+ if ((fd = g_fopen(product_path, "r")) == NULL)
+ goto skip_device;
+
+ if (fgets(tmp, sizeof(tmp), fd) == NULL) {
+ fclose(fd);
+ goto skip_device;
+ }
+ read_product_id = strtoul(tmp, NULL, 16);
+
+ fclose(fd);
+
+ if (vendor_id == read_vendor_id &&
+ product_id == read_product_id) {
+ path_copy = g_strdup(usb_dev);
+ matched_paths = g_slist_prepend(matched_paths,
+ path_copy);
+ }
+
+skip_device:
+ g_free(vendor_path);
+ g_free(product_path);
+ }
+ g_dir_close(devices_dir);
+
+ /* For every matched device try to find a ttyUSBX subfolder. */
+ for (l = matched_paths; l; l = l->next) {
+ subdir_path = NULL;
+
+ device_path = g_strconcat(device_tree, l->data, NULL);
+
+ if (!(device_dir = g_dir_open(device_path, 0, NULL))) {
+ g_free(device_path);
+ continue;
+ }
+
+ prefix = g_strconcat(l->data, ":", NULL);
+
+ while ((file = g_dir_read_name(device_dir))) {
+ if (g_str_has_prefix(file, prefix)) {
+ subdir_path = g_strconcat(device_path,
+ "/", file, NULL);
+ break;
+ }
+ }
+ g_dir_close(device_dir);
+
+ g_free(prefix);
+ g_free(device_path);
+
+ if (subdir_path) {
+ if (!(device_dir = g_dir_open(subdir_path, 0, NULL))) {
+ g_free(subdir_path);
+ continue;
+ }
+ g_free(subdir_path);
+
+ while ((file = g_dir_read_name(device_dir))) {
+ if (g_str_has_prefix(file, "ttyUSB")) {
+ tty_path = g_strconcat("/dev/",
+ file, NULL);
+ sr_dbg("Found USB device %04x:%04x attached to %s.",
+ vendor_id, product_id, tty_path);
+ tty_devs = g_slist_prepend(tty_devs,
+ tty_path);
+ break;
+ }
+ }
+ g_dir_close(device_dir);
+ }
+ }
+ g_slist_free_full(matched_paths, g_free);
+
+ return tty_devs;
+#else
+ (void)vendor_id;
+ (void)product_id;
+
+ return NULL;
+#endif
+}