+++ /dev/null
-/*
- * This file is part of the libsigrok project.
- *
- * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <string.h>
-#include "protocol.h"
-
-/* Length of expected payload for each token. */
-static int token_payloads[][2] = {
- { TOKEN_WEIGHT_TIME_FAST, 0 },
- { TOKEN_WEIGHT_TIME_SLOW, 0 },
- { TOKEN_HOLD_MAX, 0 },
- { TOKEN_HOLD_MIN, 0 },
- { TOKEN_TIME, 3 },
- { TOKEN_MEAS_RANGE_OVER, 0 },
- { TOKEN_MEAS_RANGE_UNDER, 0 },
- { TOKEN_STORE_FULL, 0 },
- { TOKEN_RECORDING_ON, 0 },
- { TOKEN_MEAS_WAS_READOUT, 1 },
- { TOKEN_MEAS_WAS_BARGRAPH, 0 },
- { TOKEN_MEASUREMENT, 2 },
- { TOKEN_HOLD_NONE, 0 },
- { TOKEN_BATTERY_LOW, 0 },
- { TOKEN_MEAS_RANGE_OK, 0 },
- { TOKEN_STORE_OK, 0 },
- { TOKEN_RECORDING_OFF, 0 },
- { TOKEN_WEIGHT_FREQ_A, 1 },
- { TOKEN_WEIGHT_FREQ_C, 1 },
- { TOKEN_BATTERY_OK, 0 },
- { TOKEN_MEAS_RANGE_30_80, 0 },
- { TOKEN_MEAS_RANGE_30_130, 0 },
- { TOKEN_MEAS_RANGE_50_100, 0 },
- { TOKEN_MEAS_RANGE_80_130, 0 },
-};
-
-static int find_token_payload_len(unsigned char c)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(token_payloads); i++) {
- if (token_payloads[i][0] == c)
- return token_payloads[i][1];
- }
-
- return -1;
-}
-
-/* Process measurement or setting (0xa5 command). */
-static void process_mset(const struct sr_dev_inst *sdi)
-{
- struct dev_context *devc;
- struct sr_datafeed_packet packet;
- struct sr_datafeed_analog analog;
- GString *dbg;
- float fvalue;
- int i;
-
- devc = sdi->priv;
- if (sr_log_loglevel_get() >= SR_LOG_SPEW) {
- dbg = g_string_sized_new(128);
- g_string_printf(dbg, "got command 0x%.2x token 0x%.2x",
- devc->cmd, devc->token);
- if (devc->buf_len) {
- g_string_append_printf(dbg, " payload");
- for (i = 0; i < devc->buf_len; i++)
- g_string_append_printf(dbg, " %.2x", devc->buf[i]);
- }
- sr_spew("%s", dbg->str);
- g_string_free(dbg, TRUE);
- }
-
- switch(devc->token) {
- case TOKEN_WEIGHT_TIME_FAST:
- devc->cur_mqflags |= SR_MQFLAG_SPL_TIME_WEIGHT_F;
- devc->cur_mqflags &= ~SR_MQFLAG_SPL_TIME_WEIGHT_S;
- break;
- case TOKEN_WEIGHT_TIME_SLOW:
- devc->cur_mqflags |= SR_MQFLAG_SPL_TIME_WEIGHT_S;
- devc->cur_mqflags &= ~SR_MQFLAG_SPL_TIME_WEIGHT_F;
- break;
- case TOKEN_WEIGHT_FREQ_A:
- devc->cur_mqflags |= SR_MQFLAG_SPL_FREQ_WEIGHT_A;
- devc->cur_mqflags &= ~SR_MQFLAG_SPL_FREQ_WEIGHT_C;
- break;
- case TOKEN_WEIGHT_FREQ_C:
- devc->cur_mqflags |= SR_MQFLAG_SPL_FREQ_WEIGHT_C;
- devc->cur_mqflags &= ~SR_MQFLAG_SPL_FREQ_WEIGHT_A;
- break;
- case TOKEN_HOLD_MAX:
- devc->cur_mqflags |= SR_MQFLAG_HOLD | SR_MQFLAG_MAX;
- devc->cur_mqflags &= ~SR_MQFLAG_MIN;
- break;
- case TOKEN_HOLD_MIN:
- devc->cur_mqflags |= SR_MQFLAG_HOLD | SR_MQFLAG_MIN;
- devc->cur_mqflags &= ~SR_MQFLAG_MAX;
- break;
- case TOKEN_HOLD_NONE:
- devc->cur_mqflags &= ~(SR_MQFLAG_MAX | SR_MQFLAG_MIN | SR_MQFLAG_HOLD);
- break;
- case TOKEN_MEASUREMENT:
- fvalue = ((devc->buf[0] & 0xf0) >> 4) * 100;
- fvalue += (devc->buf[0] & 0x0f) * 10;
- fvalue += ((devc->buf[1] & 0xf0) >> 4);
- fvalue += (devc->buf[1] & 0x0f) / 10.0;
- devc->last_spl = fvalue;
- break;
- case TOKEN_MEAS_WAS_READOUT:
- case TOKEN_MEAS_WAS_BARGRAPH:
- if (devc->cur_mqflags & (SR_MQFLAG_MAX | SR_MQFLAG_MIN)) {
- if (devc->token == TOKEN_MEAS_WAS_BARGRAPH) {
- /* The device still sends bargraph measurements even
- * when in max/min hold mode. Suppress them here, unless
- * they're readout values. This duplicates the behavior
- * of the device display exactly. */
- break;
- }
- }
- memset(&analog, 0, sizeof(struct sr_datafeed_analog));
- analog.mq = SR_MQ_SOUND_PRESSURE_LEVEL;
- analog.mqflags = devc->cur_mqflags;
- analog.unit = SR_UNIT_DECIBEL_SPL;
- analog.probes = sdi->probes;
- analog.num_samples = 1;
- analog.data = &devc->last_spl;
- packet.type = SR_DF_ANALOG;
- packet.payload = &analog;
- sr_session_send(devc->cb_data, &packet);
-
- devc->num_samples++;
- if (devc->limit_samples && devc->num_samples >= devc->limit_samples)
- sdi->driver->dev_acquisition_stop((struct sr_dev_inst *)sdi,
- devc->cb_data);
- break;
- case TOKEN_TIME:
- case TOKEN_STORE_OK:
- case TOKEN_STORE_FULL:
- case TOKEN_RECORDING_ON:
- case TOKEN_RECORDING_OFF:
- case TOKEN_BATTERY_OK:
- case TOKEN_BATTERY_LOW:
- case TOKEN_MEAS_RANGE_OK:
- case TOKEN_MEAS_RANGE_OVER:
- case TOKEN_MEAS_RANGE_UNDER:
- case TOKEN_MEAS_RANGE_30_80:
- case TOKEN_MEAS_RANGE_30_130:
- case TOKEN_MEAS_RANGE_50_100:
- case TOKEN_MEAS_RANGE_80_130:
- /* Not useful, or not expressable in sigrok. */
- break;
- }
-
-}
-
-static void process_byte(const struct sr_dev_inst *sdi, const unsigned char c)
-{
- struct dev_context *devc;
- int len;
-
- if (!(devc = sdi->priv))
- return;
-
- if (c == 0xff) {
- /* Device is in hold mode */
- devc->cur_mqflags |= SR_MQFLAG_HOLD;
-
- /* TODO: send out the last measurement at the same
- * rate as it normally gets sent */
-
- /* When the device leaves hold mode, it starts from scratch. */
- devc->state = ST_INIT;
- return;
- }
- devc->cur_mqflags &= ~SR_MQFLAG_HOLD;
-
- if (devc->state == ST_INIT) {
- if (c == 0xa5) {
- devc->cmd = c;
- devc->token = 0x00;
- devc->state = ST_GET_TOKEN;
- } else if (c == 0xbb) {
- devc->cmd = c;
- devc->buf_len = 0;
- devc->state = ST_GET_LOG;
- }
- } else if (devc->state == ST_GET_TOKEN) {
- devc->token = c;
- devc->buf_len = 0;
- len = find_token_payload_len(devc->token);
- if (len == -1 || len > 0) {
- devc->buf_len = 0;
- devc->state = ST_GET_DATA;
- } else {
- process_mset(sdi);
- devc->state = ST_INIT;
- }
- } else if (devc->state == ST_GET_DATA) {
- len = find_token_payload_len(devc->token);
- if (len == -1) {
- /* We don't know this token. */
- sr_dbg("Unknown 0xa5 token 0x%.2x", devc->token);
- if (c == 0xa5 || c == 0xbb) {
- /* Looks like a new command however. */
- process_mset(sdi);
- devc->state = ST_INIT;
- } else {
- devc->buf[devc->buf_len++] = c;
- if (devc->buf_len > BUF_SIZE) {
- /* Shouldn't happen, ignore. */
- devc->state = ST_INIT;
- }
- }
- } else {
- devc->buf[devc->buf_len++] = c;
- if (devc->buf_len == len) {
- process_mset(sdi);
- devc->state = ST_INIT;
- } else if (devc->buf_len > BUF_SIZE) {
- /* Shouldn't happen, ignore. */
- devc->state = ST_INIT;
- }
- }
- } else if (devc->state == ST_GET_LOG) {
- }
-
-}
-
-SR_PRIV int cem_dt_885x_receive_data(int fd, int revents, void *cb_data)
-{
- const struct sr_dev_inst *sdi;
- struct sr_serial_dev_inst *serial;
- unsigned char c;
-
- (void)fd;
-
- if (!(sdi = cb_data))
- return TRUE;
-
- serial = sdi->conn;
- if (revents == G_IO_IN) {
- if (serial_read(serial, &c, 1) != 1)
- return TRUE;
- process_byte(sdi, c);
- }
-
- return TRUE;
-}