+++ /dev/null
-/*
- * This file is part of the libsigrok project.
- *
- * Copyright (C) 2010-2012 Håvard Espeland <gus@ping.uio.no>,
- * Copyright (C) 2010 Martin Stensgård <mastensg@ping.uio.no>
- * Copyright (C) 2010 Carl Henrik Lunde <chlunde@ping.uio.no>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-/*
- * ASIX SIGMA/SIGMA2 logic analyzer driver
- */
-
-#include <glib.h>
-#include <glib/gstdio.h>
-#include <ftdi.h>
-#include <string.h>
-#include "libsigrok.h"
-#include "libsigrok-internal.h"
-#include "asix-sigma.h"
-
-#define USB_VENDOR 0xa600
-#define USB_PRODUCT 0xa000
-#define USB_DESCRIPTION "ASIX SIGMA"
-#define USB_VENDOR_NAME "ASIX"
-#define USB_MODEL_NAME "SIGMA"
-#define USB_MODEL_VERSION ""
-#define TRIGGER_TYPE "rf10"
-#define NUM_PROBES 16
-
-SR_PRIV struct sr_dev_driver asix_sigma_driver_info;
-static struct sr_dev_driver *di = &asix_sigma_driver_info;
-static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data);
-
-static const uint64_t samplerates[] = {
- SR_KHZ(200),
- SR_KHZ(250),
- SR_KHZ(500),
- SR_MHZ(1),
- SR_MHZ(5),
- SR_MHZ(10),
- SR_MHZ(25),
- SR_MHZ(50),
- SR_MHZ(100),
- SR_MHZ(200),
-};
-
-/*
- * Probe numbers seem to go from 1-16, according to this image:
- * http://tools.asix.net/img/sigma_sigmacab_pins_720.jpg
- * (the cable has two additional GND pins, and a TI and TO pin)
- */
-static const char *probe_names[NUM_PROBES + 1] = {
- "1", "2", "3", "4", "5", "6", "7", "8",
- "9", "10", "11", "12", "13", "14", "15", "16",
- NULL,
-};
-
-static const int32_t hwcaps[] = {
- SR_CONF_LOGIC_ANALYZER,
- SR_CONF_SAMPLERATE,
- SR_CONF_CAPTURE_RATIO,
- SR_CONF_LIMIT_MSEC,
-};
-
-/* Force the FPGA to reboot. */
-static uint8_t suicide[] = {
- 0x84, 0x84, 0x88, 0x84, 0x88, 0x84, 0x88, 0x84,
-};
-
-/* Prepare to upload firmware (FPGA specific). */
-static uint8_t init[] = {
- 0x03, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-};
-
-/* Initialize the logic analyzer mode. */
-static uint8_t logic_mode_start[] = {
- 0x00, 0x40, 0x0f, 0x25, 0x35, 0x40,
- 0x2a, 0x3a, 0x40, 0x03, 0x20, 0x38,
-};
-
-static const char *firmware_files[] = {
- "asix-sigma-50.fw", /* 50 MHz, supports 8 bit fractions */
- "asix-sigma-100.fw", /* 100 MHz */
- "asix-sigma-200.fw", /* 200 MHz */
- "asix-sigma-50sync.fw", /* Synchronous clock from pin */
- "asix-sigma-phasor.fw", /* Frequency counter */
-};
-
-static int sigma_read(void *buf, size_t size, struct dev_context *devc)
-{
- int ret;
-
- ret = ftdi_read_data(&devc->ftdic, (unsigned char *)buf, size);
- if (ret < 0) {
- sr_err("ftdi_read_data failed: %s",
- ftdi_get_error_string(&devc->ftdic));
- }
-
- return ret;
-}
-
-static int sigma_write(void *buf, size_t size, struct dev_context *devc)
-{
- int ret;
-
- ret = ftdi_write_data(&devc->ftdic, (unsigned char *)buf, size);
- if (ret < 0) {
- sr_err("ftdi_write_data failed: %s",
- ftdi_get_error_string(&devc->ftdic));
- } else if ((size_t) ret != size) {
- sr_err("ftdi_write_data did not complete write.");
- }
-
- return ret;
-}
-
-static int sigma_write_register(uint8_t reg, uint8_t *data, size_t len,
- struct dev_context *devc)
-{
- size_t i;
- uint8_t buf[len + 2];
- int idx = 0;
-
- buf[idx++] = REG_ADDR_LOW | (reg & 0xf);
- buf[idx++] = REG_ADDR_HIGH | (reg >> 4);
-
- for (i = 0; i < len; ++i) {
- buf[idx++] = REG_DATA_LOW | (data[i] & 0xf);
- buf[idx++] = REG_DATA_HIGH_WRITE | (data[i] >> 4);
- }
-
- return sigma_write(buf, idx, devc);
-}
-
-static int sigma_set_register(uint8_t reg, uint8_t value, struct dev_context *devc)
-{
- return sigma_write_register(reg, &value, 1, devc);
-}
-
-static int sigma_read_register(uint8_t reg, uint8_t *data, size_t len,
- struct dev_context *devc)
-{
- uint8_t buf[3];
-
- buf[0] = REG_ADDR_LOW | (reg & 0xf);
- buf[1] = REG_ADDR_HIGH | (reg >> 4);
- buf[2] = REG_READ_ADDR;
-
- sigma_write(buf, sizeof(buf), devc);
-
- return sigma_read(data, len, devc);
-}
-
-static uint8_t sigma_get_register(uint8_t reg, struct dev_context *devc)
-{
- uint8_t value;
-
- if (1 != sigma_read_register(reg, &value, 1, devc)) {
- sr_err("sigma_get_register: 1 byte expected");
- return 0;
- }
-
- return value;
-}
-
-static int sigma_read_pos(uint32_t *stoppos, uint32_t *triggerpos,
- struct dev_context *devc)
-{
- uint8_t buf[] = {
- REG_ADDR_LOW | READ_TRIGGER_POS_LOW,
-
- REG_READ_ADDR | NEXT_REG,
- REG_READ_ADDR | NEXT_REG,
- REG_READ_ADDR | NEXT_REG,
- REG_READ_ADDR | NEXT_REG,
- REG_READ_ADDR | NEXT_REG,
- REG_READ_ADDR | NEXT_REG,
- };
- uint8_t result[6];
-
- sigma_write(buf, sizeof(buf), devc);
-
- sigma_read(result, sizeof(result), devc);
-
- *triggerpos = result[0] | (result[1] << 8) | (result[2] << 16);
- *stoppos = result[3] | (result[4] << 8) | (result[5] << 16);
-
- /* Not really sure why this must be done, but according to spec. */
- if ((--*stoppos & 0x1ff) == 0x1ff)
- stoppos -= 64;
-
- if ((*--triggerpos & 0x1ff) == 0x1ff)
- triggerpos -= 64;
-
- return 1;
-}
-
-static int sigma_read_dram(uint16_t startchunk, size_t numchunks,
- uint8_t *data, struct dev_context *devc)
-{
- size_t i;
- uint8_t buf[4096];
- int idx = 0;
-
- /* Send the startchunk. Index start with 1. */
- buf[0] = startchunk >> 8;
- buf[1] = startchunk & 0xff;
- sigma_write_register(WRITE_MEMROW, buf, 2, devc);
-
- /* Read the DRAM. */
- buf[idx++] = REG_DRAM_BLOCK;
- buf[idx++] = REG_DRAM_WAIT_ACK;
-
- for (i = 0; i < numchunks; ++i) {
- /* Alternate bit to copy from DRAM to cache. */
- if (i != (numchunks - 1))
- buf[idx++] = REG_DRAM_BLOCK | (((i + 1) % 2) << 4);
-
- buf[idx++] = REG_DRAM_BLOCK_DATA | ((i % 2) << 4);
-
- if (i != (numchunks - 1))
- buf[idx++] = REG_DRAM_WAIT_ACK;
- }
-
- sigma_write(buf, idx, devc);
-
- return sigma_read(data, numchunks * CHUNK_SIZE, devc);
-}
-
-/* Upload trigger look-up tables to Sigma. */
-static int sigma_write_trigger_lut(struct triggerlut *lut, struct dev_context *devc)
-{
- int i;
- uint8_t tmp[2];
- uint16_t bit;
-
- /* Transpose the table and send to Sigma. */
- for (i = 0; i < 16; ++i) {
- bit = 1 << i;
-
- tmp[0] = tmp[1] = 0;
-
- if (lut->m2d[0] & bit)
- tmp[0] |= 0x01;
- if (lut->m2d[1] & bit)
- tmp[0] |= 0x02;
- if (lut->m2d[2] & bit)
- tmp[0] |= 0x04;
- if (lut->m2d[3] & bit)
- tmp[0] |= 0x08;
-
- if (lut->m3 & bit)
- tmp[0] |= 0x10;
- if (lut->m3s & bit)
- tmp[0] |= 0x20;
- if (lut->m4 & bit)
- tmp[0] |= 0x40;
-
- if (lut->m0d[0] & bit)
- tmp[1] |= 0x01;
- if (lut->m0d[1] & bit)
- tmp[1] |= 0x02;
- if (lut->m0d[2] & bit)
- tmp[1] |= 0x04;
- if (lut->m0d[3] & bit)
- tmp[1] |= 0x08;
-
- if (lut->m1d[0] & bit)
- tmp[1] |= 0x10;
- if (lut->m1d[1] & bit)
- tmp[1] |= 0x20;
- if (lut->m1d[2] & bit)
- tmp[1] |= 0x40;
- if (lut->m1d[3] & bit)
- tmp[1] |= 0x80;
-
- sigma_write_register(WRITE_TRIGGER_SELECT0, tmp, sizeof(tmp),
- devc);
- sigma_set_register(WRITE_TRIGGER_SELECT1, 0x30 | i, devc);
- }
-
- /* Send the parameters */
- sigma_write_register(WRITE_TRIGGER_SELECT0, (uint8_t *) &lut->params,
- sizeof(lut->params), devc);
-
- return SR_OK;
-}
-
-/* Generate the bitbang stream for programming the FPGA. */
-static int bin2bitbang(const char *filename,
- unsigned char **buf, size_t *buf_size)
-{
- FILE *f;
- unsigned long file_size;
- unsigned long offset = 0;
- unsigned char *p;
- uint8_t *firmware;
- unsigned long fwsize = 0;
- const int buffer_size = 65536;
- size_t i;
- int c, bit, v;
- uint32_t imm = 0x3f6df2ab;
-
- f = g_fopen(filename, "rb");
- if (!f) {
- sr_err("g_fopen(\"%s\", \"rb\")", filename);
- return SR_ERR;
- }
-
- if (-1 == fseek(f, 0, SEEK_END)) {
- sr_err("fseek on %s failed", filename);
- fclose(f);
- return SR_ERR;
- }
-
- file_size = ftell(f);
-
- fseek(f, 0, SEEK_SET);
-
- if (!(firmware = g_try_malloc(buffer_size))) {
- sr_err("%s: firmware malloc failed", __func__);
- fclose(f);
- return SR_ERR_MALLOC;
- }
-
- while ((c = getc(f)) != EOF) {
- imm = (imm + 0xa853753) % 177 + (imm * 0x8034052);
- firmware[fwsize++] = c ^ imm;
- }
- fclose(f);
-
- if(fwsize != file_size) {
- sr_err("%s: Error reading firmware", filename);
- fclose(f);
- g_free(firmware);
- return SR_ERR;
- }
-
- *buf_size = fwsize * 2 * 8;
-
- *buf = p = (unsigned char *)g_try_malloc(*buf_size);
- if (!p) {
- sr_err("%s: buf/p malloc failed", __func__);
- g_free(firmware);
- return SR_ERR_MALLOC;
- }
-
- for (i = 0; i < fwsize; ++i) {
- for (bit = 7; bit >= 0; --bit) {
- v = firmware[i] & 1 << bit ? 0x40 : 0x00;
- p[offset++] = v | 0x01;
- p[offset++] = v;
- }
- }
-
- g_free(firmware);
-
- if (offset != *buf_size) {
- g_free(*buf);
- sr_err("Error reading firmware %s "
- "offset=%ld, file_size=%ld, buf_size=%zd.",
- filename, offset, file_size, *buf_size);
-
- return SR_ERR;
- }
-
- return SR_OK;
-}
-
-static int clear_instances(void)
-{
- GSList *l;
- struct sr_dev_inst *sdi;
- struct drv_context *drvc;
- struct dev_context *devc;
-
- drvc = di->priv;
-
- /* Properly close all devices. */
- for (l = drvc->instances; l; l = l->next) {
- if (!(sdi = l->data)) {
- /* Log error, but continue cleaning up the rest. */
- sr_err("%s: sdi was NULL, continuing", __func__);
- continue;
- }
- if (sdi->priv) {
- devc = sdi->priv;
- ftdi_deinit(&devc->ftdic);
- }
- sr_dev_inst_free(sdi);
- }
- g_slist_free(drvc->instances);
- drvc->instances = NULL;
-
- return SR_OK;
-}
-
-static int hw_init(struct sr_context *sr_ctx)
-{
- return std_hw_init(sr_ctx, di, DRIVER_LOG_DOMAIN);
-}
-
-static GSList *hw_scan(GSList *options)
-{
- struct sr_dev_inst *sdi;
- struct sr_probe *probe;
- struct drv_context *drvc;
- struct dev_context *devc;
- GSList *devices;
- struct ftdi_device_list *devlist;
- char serial_txt[10];
- uint32_t serial;
- int ret, i;
-
- (void)options;
-
- drvc = di->priv;
-
- devices = NULL;
-
- clear_instances();
-
- if (!(devc = g_try_malloc(sizeof(struct dev_context)))) {
- sr_err("%s: devc malloc failed", __func__);
- return NULL;
- }
-
- ftdi_init(&devc->ftdic);
-
- /* Look for SIGMAs. */
-
- if ((ret = ftdi_usb_find_all(&devc->ftdic, &devlist,
- USB_VENDOR, USB_PRODUCT)) <= 0) {
- if (ret < 0)
- sr_err("ftdi_usb_find_all(): %d", ret);
- goto free;
- }
-
- /* Make sure it's a version 1 or 2 SIGMA. */
- ftdi_usb_get_strings(&devc->ftdic, devlist->dev, NULL, 0, NULL, 0,
- serial_txt, sizeof(serial_txt));
- sscanf(serial_txt, "%x", &serial);
-
- if (serial < 0xa6010000 || serial > 0xa602ffff) {
- sr_err("Only SIGMA and SIGMA2 are supported "
- "in this version of libsigrok.");
- goto free;
- }
-
- sr_info("Found ASIX SIGMA - Serial: %s", serial_txt);
-
- devc->cur_samplerate = 0;
- devc->period_ps = 0;
- devc->limit_msec = 0;
- devc->cur_firmware = -1;
- devc->num_probes = 0;
- devc->samples_per_event = 0;
- devc->capture_ratio = 50;
- devc->use_triggers = 0;
-
- /* Register SIGMA device. */
- if (!(sdi = sr_dev_inst_new(0, SR_ST_INITIALIZING, USB_VENDOR_NAME,
- USB_MODEL_NAME, USB_MODEL_VERSION))) {
- sr_err("%s: sdi was NULL", __func__);
- goto free;
- }
- sdi->driver = di;
-
- for (i = 0; probe_names[i]; i++) {
- if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE,
- probe_names[i])))
- return NULL;
- sdi->probes = g_slist_append(sdi->probes, probe);
- }
-
- devices = g_slist_append(devices, sdi);
- drvc->instances = g_slist_append(drvc->instances, sdi);
- sdi->priv = devc;
-
- /* We will open the device again when we need it. */
- ftdi_list_free(&devlist);
-
- return devices;
-
-free:
- ftdi_deinit(&devc->ftdic);
- g_free(devc);
- return NULL;
-}
-
-static GSList *hw_dev_list(void)
-{
- return ((struct drv_context *)(di->priv))->instances;
-}
-
-static int upload_firmware(int firmware_idx, struct dev_context *devc)
-{
- int ret;
- unsigned char *buf;
- unsigned char pins;
- size_t buf_size;
- unsigned char result[32];
- char firmware_path[128];
-
- /* Make sure it's an ASIX SIGMA. */
- if ((ret = ftdi_usb_open_desc(&devc->ftdic,
- USB_VENDOR, USB_PRODUCT, USB_DESCRIPTION, NULL)) < 0) {
- sr_err("ftdi_usb_open failed: %s",
- ftdi_get_error_string(&devc->ftdic));
- return 0;
- }
-
- if ((ret = ftdi_set_bitmode(&devc->ftdic, 0xdf, BITMODE_BITBANG)) < 0) {
- sr_err("ftdi_set_bitmode failed: %s",
- ftdi_get_error_string(&devc->ftdic));
- return 0;
- }
-
- /* Four times the speed of sigmalogan - Works well. */
- if ((ret = ftdi_set_baudrate(&devc->ftdic, 750000)) < 0) {
- sr_err("ftdi_set_baudrate failed: %s",
- ftdi_get_error_string(&devc->ftdic));
- return 0;
- }
-
- /* Force the FPGA to reboot. */
- sigma_write(suicide, sizeof(suicide), devc);
- sigma_write(suicide, sizeof(suicide), devc);
- sigma_write(suicide, sizeof(suicide), devc);
- sigma_write(suicide, sizeof(suicide), devc);
-
- /* Prepare to upload firmware (FPGA specific). */
- sigma_write(init, sizeof(init), devc);
-
- ftdi_usb_purge_buffers(&devc->ftdic);
-
- /* Wait until the FPGA asserts INIT_B. */
- while (1) {
- ret = sigma_read(result, 1, devc);
- if (result[0] & 0x20)
- break;
- }
-
- /* Prepare firmware. */
- snprintf(firmware_path, sizeof(firmware_path), "%s/%s", FIRMWARE_DIR,
- firmware_files[firmware_idx]);
-
- if ((ret = bin2bitbang(firmware_path, &buf, &buf_size)) != SR_OK) {
- sr_err("An error occured while reading the firmware: %s",
- firmware_path);
- return ret;
- }
-
- /* Upload firmare. */
- sr_info("Uploading firmware file '%s'.", firmware_files[firmware_idx]);
- sigma_write(buf, buf_size, devc);
-
- g_free(buf);
-
- if ((ret = ftdi_set_bitmode(&devc->ftdic, 0x00, BITMODE_RESET)) < 0) {
- sr_err("ftdi_set_bitmode failed: %s",
- ftdi_get_error_string(&devc->ftdic));
- return SR_ERR;
- }
-
- ftdi_usb_purge_buffers(&devc->ftdic);
-
- /* Discard garbage. */
- while (1 == sigma_read(&pins, 1, devc))
- ;
-
- /* Initialize the logic analyzer mode. */
- sigma_write(logic_mode_start, sizeof(logic_mode_start), devc);
-
- /* Expect a 3 byte reply. */
- ret = sigma_read(result, 3, devc);
- if (ret != 3 ||
- result[0] != 0xa6 || result[1] != 0x55 || result[2] != 0xaa) {
- sr_err("Configuration failed. Invalid reply received.");
- return SR_ERR;
- }
-
- devc->cur_firmware = firmware_idx;
-
- sr_info("Firmware uploaded.");
-
- return SR_OK;
-}
-
-static int hw_dev_open(struct sr_dev_inst *sdi)
-{
- struct dev_context *devc;
- int ret;
-
- devc = sdi->priv;
-
- /* Make sure it's an ASIX SIGMA. */
- if ((ret = ftdi_usb_open_desc(&devc->ftdic,
- USB_VENDOR, USB_PRODUCT, USB_DESCRIPTION, NULL)) < 0) {
-
- sr_err("ftdi_usb_open failed: %s",
- ftdi_get_error_string(&devc->ftdic));
-
- return 0;
- }
-
- sdi->status = SR_ST_ACTIVE;
-
- return SR_OK;
-}
-
-static int set_samplerate(const struct sr_dev_inst *sdi, uint64_t samplerate)
-{
- struct dev_context *devc;
- unsigned int i;
- int ret;
-
- devc = sdi->priv;
- ret = SR_OK;
-
- for (i = 0; i < ARRAY_SIZE(samplerates); i++) {
- if (samplerates[i] == samplerate)
- break;
- }
- if (samplerates[i] == 0)
- return SR_ERR_SAMPLERATE;
-
- if (samplerate <= SR_MHZ(50)) {
- ret = upload_firmware(0, devc);
- devc->num_probes = 16;
- }
- if (samplerate == SR_MHZ(100)) {
- ret = upload_firmware(1, devc);
- devc->num_probes = 8;
- }
- else if (samplerate == SR_MHZ(200)) {
- ret = upload_firmware(2, devc);
- devc->num_probes = 4;
- }
-
- devc->cur_samplerate = samplerate;
- devc->period_ps = 1000000000000ULL / samplerate;
- devc->samples_per_event = 16 / devc->num_probes;
- devc->state.state = SIGMA_IDLE;
-
- return ret;
-}
-
-/*
- * In 100 and 200 MHz mode, only a single pin rising/falling can be
- * set as trigger. In other modes, two rising/falling triggers can be set,
- * in addition to value/mask trigger for any number of probes.
- *
- * The Sigma supports complex triggers using boolean expressions, but this
- * has not been implemented yet.
- */
-static int configure_probes(const struct sr_dev_inst *sdi)
-{
- struct dev_context *devc = sdi->priv;
- const struct sr_probe *probe;
- const GSList *l;
- int trigger_set = 0;
- int probebit;
-
- memset(&devc->trigger, 0, sizeof(struct sigma_trigger));
-
- for (l = sdi->probes; l; l = l->next) {
- probe = (struct sr_probe *)l->data;
- probebit = 1 << (probe->index);
-
- if (!probe->enabled || !probe->trigger)
- continue;
-
- if (devc->cur_samplerate >= SR_MHZ(100)) {
- /* Fast trigger support. */
- if (trigger_set) {
- sr_err("Only a single pin trigger in 100 and "
- "200MHz mode is supported.");
- return SR_ERR;
- }
- if (probe->trigger[0] == 'f')
- devc->trigger.fallingmask |= probebit;
- else if (probe->trigger[0] == 'r')
- devc->trigger.risingmask |= probebit;
- else {
- sr_err("Only rising/falling trigger in 100 "
- "and 200MHz mode is supported.");
- return SR_ERR;
- }
-
- ++trigger_set;
- } else {
- /* Simple trigger support (event). */
- if (probe->trigger[0] == '1') {
- devc->trigger.simplevalue |= probebit;
- devc->trigger.simplemask |= probebit;
- }
- else if (probe->trigger[0] == '0') {
- devc->trigger.simplevalue &= ~probebit;
- devc->trigger.simplemask |= probebit;
- }
- else if (probe->trigger[0] == 'f') {
- devc->trigger.fallingmask |= probebit;
- ++trigger_set;
- }
- else if (probe->trigger[0] == 'r') {
- devc->trigger.risingmask |= probebit;
- ++trigger_set;
- }
-
- /*
- * Actually, Sigma supports 2 rising/falling triggers,
- * but they are ORed and the current trigger syntax
- * does not permit ORed triggers.
- */
- if (trigger_set > 1) {
- sr_err("Only 1 rising/falling trigger "
- "is supported.");
- return SR_ERR;
- }
- }
-
- if (trigger_set)
- devc->use_triggers = 1;
- }
-
- return SR_OK;
-}
-
-static int hw_dev_close(struct sr_dev_inst *sdi)
-{
- struct dev_context *devc;
-
- devc = sdi->priv;
-
- /* TODO */
- if (sdi->status == SR_ST_ACTIVE)
- ftdi_usb_close(&devc->ftdic);
-
- sdi->status = SR_ST_INACTIVE;
-
- return SR_OK;
-}
-
-static int hw_cleanup(void)
-{
- if (!di->priv)
- return SR_OK;
-
- clear_instances();
-
- return SR_OK;
-}
-
-static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi)
-{
- struct dev_context *devc;
-
- switch (id) {
- case SR_CONF_SAMPLERATE:
- if (sdi) {
- devc = sdi->priv;
- *data = g_variant_new_uint64(devc->cur_samplerate);
- } else
- return SR_ERR;
- break;
- default:
- return SR_ERR_NA;
- }
-
- return SR_OK;
-}
-
-static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi)
-{
- struct dev_context *devc;
- int ret;
-
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
- devc = sdi->priv;
-
- if (id == SR_CONF_SAMPLERATE) {
- ret = set_samplerate(sdi, g_variant_get_uint64(data));
- } else if (id == SR_CONF_LIMIT_MSEC) {
- devc->limit_msec = g_variant_get_uint64(data);
- if (devc->limit_msec > 0)
- ret = SR_OK;
- else
- ret = SR_ERR;
- } else if (id == SR_CONF_CAPTURE_RATIO) {
- devc->capture_ratio = g_variant_get_uint64(data);
- if (devc->capture_ratio < 0 || devc->capture_ratio > 100)
- ret = SR_ERR;
- else
- ret = SR_OK;
- } else {
- ret = SR_ERR_NA;
- }
-
- return ret;
-}
-
-static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi)
-{
- GVariant *gvar;
- GVariantBuilder gvb;
-
- (void)sdi;
-
- switch (key) {
- case SR_CONF_DEVICE_OPTIONS:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
- hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t));
- break;
- case SR_CONF_SAMPLERATE:
- g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
- gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
- ARRAY_SIZE(samplerates), sizeof(uint64_t));
- g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
- *data = g_variant_builder_end(&gvb);
- break;
- case SR_CONF_TRIGGER_TYPE:
- *data = g_variant_new_string(TRIGGER_TYPE);
- break;
- default:
- return SR_ERR_NA;
- }
-
- return SR_OK;
-}
-
-/* Software trigger to determine exact trigger position. */
-static int get_trigger_offset(uint16_t *samples, uint16_t last_sample,
- struct sigma_trigger *t)
-{
- int i;
-
- for (i = 0; i < 8; ++i) {
- if (i > 0)
- last_sample = samples[i-1];
-
- /* Simple triggers. */
- if ((samples[i] & t->simplemask) != t->simplevalue)
- continue;
-
- /* Rising edge. */
- if ((last_sample & t->risingmask) != 0 || (samples[i] &
- t->risingmask) != t->risingmask)
- continue;
-
- /* Falling edge. */
- if ((last_sample & t->fallingmask) != t->fallingmask ||
- (samples[i] & t->fallingmask) != 0)
- continue;
-
- break;
- }
-
- /* If we did not match, return original trigger pos. */
- return i & 0x7;
-}
-
-/*
- * Decode chunk of 1024 bytes, 64 clusters, 7 events per cluster.
- * Each event is 20ns apart, and can contain multiple samples.
- *
- * For 200 MHz, events contain 4 samples for each channel, spread 5 ns apart.
- * For 100 MHz, events contain 2 samples for each channel, spread 10 ns apart.
- * For 50 MHz and below, events contain one sample for each channel,
- * spread 20 ns apart.
- */
-static int decode_chunk_ts(uint8_t *buf, uint16_t *lastts,
- uint16_t *lastsample, int triggerpos,
- uint16_t limit_chunk, void *cb_data)
-{
- struct sr_dev_inst *sdi = cb_data;
- struct dev_context *devc = sdi->priv;
- uint16_t tsdiff, ts;
- uint16_t samples[65536 * devc->samples_per_event];
- struct sr_datafeed_packet packet;
- struct sr_datafeed_logic logic;
- int i, j, k, l, numpad, tosend;
- size_t n = 0, sent = 0;
- int clustersize = EVENTS_PER_CLUSTER * devc->samples_per_event;
- uint16_t *event;
- uint16_t cur_sample;
- int triggerts = -1;
-
- /* Check if trigger is in this chunk. */
- if (triggerpos != -1) {
- if (devc->cur_samplerate <= SR_MHZ(50))
- triggerpos -= EVENTS_PER_CLUSTER - 1;
-
- if (triggerpos < 0)
- triggerpos = 0;
-
- /* Find in which cluster the trigger occured. */
- triggerts = triggerpos / 7;
- }
-
- /* For each ts. */
- for (i = 0; i < 64; ++i) {
- ts = *(uint16_t *) &buf[i * 16];
- tsdiff = ts - *lastts;
- *lastts = ts;
-
- /* Decode partial chunk. */
- if (limit_chunk && ts > limit_chunk)
- return SR_OK;
-
- /* Pad last sample up to current point. */
- numpad = tsdiff * devc->samples_per_event - clustersize;
- if (numpad > 0) {
- for (j = 0; j < numpad; ++j)
- samples[j] = *lastsample;
-
- n = numpad;
- }
-
- /* Send samples between previous and this timestamp to sigrok. */
- sent = 0;
- while (sent < n) {
- tosend = MIN(2048, n - sent);
-
- packet.type = SR_DF_LOGIC;
- packet.payload = &logic;
- logic.length = tosend * sizeof(uint16_t);
- logic.unitsize = 2;
- logic.data = samples + sent;
- sr_session_send(devc->cb_data, &packet);
-
- sent += tosend;
- }
- n = 0;
-
- event = (uint16_t *) &buf[i * 16 + 2];
- cur_sample = 0;
-
- /* For each event in cluster. */
- for (j = 0; j < 7; ++j) {
-
- /* For each sample in event. */
- for (k = 0; k < devc->samples_per_event; ++k) {
- cur_sample = 0;
-
- /* For each probe. */
- for (l = 0; l < devc->num_probes; ++l)
- cur_sample |= (!!(event[j] & (1 << (l *
- devc->samples_per_event + k)))) << l;
-
- samples[n++] = cur_sample;
- }
- }
-
- /* Send data up to trigger point (if triggered). */
- sent = 0;
- if (i == triggerts) {
- /*
- * Trigger is not always accurate to sample because of
- * pipeline delay. However, it always triggers before
- * the actual event. We therefore look at the next
- * samples to pinpoint the exact position of the trigger.
- */
- tosend = get_trigger_offset(samples, *lastsample,
- &devc->trigger);
-
- if (tosend > 0) {
- packet.type = SR_DF_LOGIC;
- packet.payload = &logic;
- logic.length = tosend * sizeof(uint16_t);
- logic.unitsize = 2;
- logic.data = samples;
- sr_session_send(devc->cb_data, &packet);
-
- sent += tosend;
- }
-
- /* Only send trigger if explicitly enabled. */
- if (devc->use_triggers) {
- packet.type = SR_DF_TRIGGER;
- sr_session_send(devc->cb_data, &packet);
- }
- }
-
- /* Send rest of the chunk to sigrok. */
- tosend = n - sent;
-
- if (tosend > 0) {
- packet.type = SR_DF_LOGIC;
- packet.payload = &logic;
- logic.length = tosend * sizeof(uint16_t);
- logic.unitsize = 2;
- logic.data = samples + sent;
- sr_session_send(devc->cb_data, &packet);
- }
-
- *lastsample = samples[n - 1];
- }
-
- return SR_OK;
-}
-
-static int receive_data(int fd, int revents, void *cb_data)
-{
- struct sr_dev_inst *sdi = cb_data;
- struct dev_context *devc = sdi->priv;
- struct sr_datafeed_packet packet;
- const int chunks_per_read = 32;
- unsigned char buf[chunks_per_read * CHUNK_SIZE];
- int bufsz, numchunks, i, newchunks;
- uint64_t running_msec;
- struct timeval tv;
-
- (void)fd;
- (void)revents;
-
- /* Get the current position. */
- sigma_read_pos(&devc->state.stoppos, &devc->state.triggerpos, devc);
-
- numchunks = (devc->state.stoppos + 511) / 512;
-
- if (devc->state.state == SIGMA_IDLE)
- return TRUE;
-
- if (devc->state.state == SIGMA_CAPTURE) {
- /* Check if the timer has expired, or memory is full. */
- gettimeofday(&tv, 0);
- running_msec = (tv.tv_sec - devc->start_tv.tv_sec) * 1000 +
- (tv.tv_usec - devc->start_tv.tv_usec) / 1000;
-
- if (running_msec < devc->limit_msec && numchunks < 32767)
- return TRUE; /* While capturing... */
- else
- hw_dev_acquisition_stop(sdi, sdi);
-
- }
-
- if (devc->state.state == SIGMA_DOWNLOAD) {
- if (devc->state.chunks_downloaded >= numchunks) {
- /* End of samples. */
- packet.type = SR_DF_END;
- sr_session_send(devc->cb_data, &packet);
-
- devc->state.state = SIGMA_IDLE;
-
- return TRUE;
- }
-
- newchunks = MIN(chunks_per_read,
- numchunks - devc->state.chunks_downloaded);
-
- sr_info("Downloading sample data: %.0f %%.",
- 100.0 * devc->state.chunks_downloaded / numchunks);
-
- bufsz = sigma_read_dram(devc->state.chunks_downloaded,
- newchunks, buf, devc);
- /* TODO: Check bufsz. For now, just avoid compiler warnings. */
- (void)bufsz;
-
- /* Find first ts. */
- if (devc->state.chunks_downloaded == 0) {
- devc->state.lastts = *(uint16_t *) buf - 1;
- devc->state.lastsample = 0;
- }
-
- /* Decode chunks and send them to sigrok. */
- for (i = 0; i < newchunks; ++i) {
- int limit_chunk = 0;
-
- /* The last chunk may potentially be only in part. */
- if (devc->state.chunks_downloaded == numchunks - 1) {
- /* Find the last valid timestamp */
- limit_chunk = devc->state.stoppos % 512 + devc->state.lastts;
- }
-
- if (devc->state.chunks_downloaded + i == devc->state.triggerchunk)
- decode_chunk_ts(buf + (i * CHUNK_SIZE),
- &devc->state.lastts,
- &devc->state.lastsample,
- devc->state.triggerpos & 0x1ff,
- limit_chunk, sdi);
- else
- decode_chunk_ts(buf + (i * CHUNK_SIZE),
- &devc->state.lastts,
- &devc->state.lastsample,
- -1, limit_chunk, sdi);
-
- ++devc->state.chunks_downloaded;
- }
- }
-
- return TRUE;
-}
-
-/* Build a LUT entry used by the trigger functions. */
-static void build_lut_entry(uint16_t value, uint16_t mask, uint16_t *entry)
-{
- int i, j, k, bit;
-
- /* For each quad probe. */
- for (i = 0; i < 4; ++i) {
- entry[i] = 0xffff;
-
- /* For each bit in LUT. */
- for (j = 0; j < 16; ++j)
-
- /* For each probe in quad. */
- for (k = 0; k < 4; ++k) {
- bit = 1 << (i * 4 + k);
-
- /* Set bit in entry */
- if ((mask & bit) &&
- ((!(value & bit)) !=
- (!(j & (1 << k)))))
- entry[i] &= ~(1 << j);
- }
- }
-}
-
-/* Add a logical function to LUT mask. */
-static void add_trigger_function(enum triggerop oper, enum triggerfunc func,
- int index, int neg, uint16_t *mask)
-{
- int i, j;
- int x[2][2], tmp, a, b, aset, bset, rset;
-
- memset(x, 0, 4 * sizeof(int));
-
- /* Trigger detect condition. */
- switch (oper) {
- case OP_LEVEL:
- x[0][1] = 1;
- x[1][1] = 1;
- break;
- case OP_NOT:
- x[0][0] = 1;
- x[1][0] = 1;
- break;
- case OP_RISE:
- x[0][1] = 1;
- break;
- case OP_FALL:
- x[1][0] = 1;
- break;
- case OP_RISEFALL:
- x[0][1] = 1;
- x[1][0] = 1;
- break;
- case OP_NOTRISE:
- x[1][1] = 1;
- x[0][0] = 1;
- x[1][0] = 1;
- break;
- case OP_NOTFALL:
- x[1][1] = 1;
- x[0][0] = 1;
- x[0][1] = 1;
- break;
- case OP_NOTRISEFALL:
- x[1][1] = 1;
- x[0][0] = 1;
- break;
- }
-
- /* Transpose if neg is set. */
- if (neg) {
- for (i = 0; i < 2; ++i) {
- for (j = 0; j < 2; ++j) {
- tmp = x[i][j];
- x[i][j] = x[1-i][1-j];
- x[1-i][1-j] = tmp;
- }
- }
- }
-
- /* Update mask with function. */
- for (i = 0; i < 16; ++i) {
- a = (i >> (2 * index + 0)) & 1;
- b = (i >> (2 * index + 1)) & 1;
-
- aset = (*mask >> i) & 1;
- bset = x[b][a];
-
- if (func == FUNC_AND || func == FUNC_NAND)
- rset = aset & bset;
- else if (func == FUNC_OR || func == FUNC_NOR)
- rset = aset | bset;
- else if (func == FUNC_XOR || func == FUNC_NXOR)
- rset = aset ^ bset;
-
- if (func == FUNC_NAND || func == FUNC_NOR || func == FUNC_NXOR)
- rset = !rset;
-
- *mask &= ~(1 << i);
-
- if (rset)
- *mask |= 1 << i;
- }
-}
-
-/*
- * Build trigger LUTs used by 50 MHz and lower sample rates for supporting
- * simple pin change and state triggers. Only two transitions (rise/fall) can be
- * set at any time, but a full mask and value can be set (0/1).
- */
-static int build_basic_trigger(struct triggerlut *lut, struct dev_context *devc)
-{
- int i,j;
- uint16_t masks[2] = { 0, 0 };
-
- memset(lut, 0, sizeof(struct triggerlut));
-
- /* Contant for simple triggers. */
- lut->m4 = 0xa000;
-
- /* Value/mask trigger support. */
- build_lut_entry(devc->trigger.simplevalue, devc->trigger.simplemask,
- lut->m2d);
-
- /* Rise/fall trigger support. */
- for (i = 0, j = 0; i < 16; ++i) {
- if (devc->trigger.risingmask & (1 << i) ||
- devc->trigger.fallingmask & (1 << i))
- masks[j++] = 1 << i;
- }
-
- build_lut_entry(masks[0], masks[0], lut->m0d);
- build_lut_entry(masks[1], masks[1], lut->m1d);
-
- /* Add glue logic */
- if (masks[0] || masks[1]) {
- /* Transition trigger. */
- if (masks[0] & devc->trigger.risingmask)
- add_trigger_function(OP_RISE, FUNC_OR, 0, 0, &lut->m3);
- if (masks[0] & devc->trigger.fallingmask)
- add_trigger_function(OP_FALL, FUNC_OR, 0, 0, &lut->m3);
- if (masks[1] & devc->trigger.risingmask)
- add_trigger_function(OP_RISE, FUNC_OR, 1, 0, &lut->m3);
- if (masks[1] & devc->trigger.fallingmask)
- add_trigger_function(OP_FALL, FUNC_OR, 1, 0, &lut->m3);
- } else {
- /* Only value/mask trigger. */
- lut->m3 = 0xffff;
- }
-
- /* Triggertype: event. */
- lut->params.selres = 3;
-
- return SR_OK;
-}
-
-static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
- void *cb_data)
-{
- struct dev_context *devc;
- struct clockselect_50 clockselect;
- int frac, triggerpin, ret;
- uint8_t triggerselect = 0;
- struct triggerinout triggerinout_conf;
- struct triggerlut lut;
-
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
- devc = sdi->priv;
-
- if (configure_probes(sdi) != SR_OK) {
- sr_err("Failed to configure probes.");
- return SR_ERR;
- }
-
- /* If the samplerate has not been set, default to 200 kHz. */
- if (devc->cur_firmware == -1) {
- if ((ret = set_samplerate(sdi, SR_KHZ(200))) != SR_OK)
- return ret;
- }
-
- /* Enter trigger programming mode. */
- sigma_set_register(WRITE_TRIGGER_SELECT1, 0x20, devc);
-
- /* 100 and 200 MHz mode. */
- if (devc->cur_samplerate >= SR_MHZ(100)) {
- sigma_set_register(WRITE_TRIGGER_SELECT1, 0x81, devc);
-
- /* Find which pin to trigger on from mask. */
- for (triggerpin = 0; triggerpin < 8; ++triggerpin)
- if ((devc->trigger.risingmask | devc->trigger.fallingmask) &
- (1 << triggerpin))
- break;
-
- /* Set trigger pin and light LED on trigger. */
- triggerselect = (1 << LEDSEL1) | (triggerpin & 0x7);
-
- /* Default rising edge. */
- if (devc->trigger.fallingmask)
- triggerselect |= 1 << 3;
-
- /* All other modes. */
- } else if (devc->cur_samplerate <= SR_MHZ(50)) {
- build_basic_trigger(&lut, devc);
-
- sigma_write_trigger_lut(&lut, devc);
-
- triggerselect = (1 << LEDSEL1) | (1 << LEDSEL0);
- }
-
- /* Setup trigger in and out pins to default values. */
- memset(&triggerinout_conf, 0, sizeof(struct triggerinout));
- triggerinout_conf.trgout_bytrigger = 1;
- triggerinout_conf.trgout_enable = 1;
-
- sigma_write_register(WRITE_TRIGGER_OPTION,
- (uint8_t *) &triggerinout_conf,
- sizeof(struct triggerinout), devc);
-
- /* Go back to normal mode. */
- sigma_set_register(WRITE_TRIGGER_SELECT1, triggerselect, devc);
-
- /* Set clock select register. */
- if (devc->cur_samplerate == SR_MHZ(200))
- /* Enable 4 probes. */
- sigma_set_register(WRITE_CLOCK_SELECT, 0xf0, devc);
- else if (devc->cur_samplerate == SR_MHZ(100))
- /* Enable 8 probes. */
- sigma_set_register(WRITE_CLOCK_SELECT, 0x00, devc);
- else {
- /*
- * 50 MHz mode (or fraction thereof). Any fraction down to
- * 50 MHz / 256 can be used, but is not supported by sigrok API.
- */
- frac = SR_MHZ(50) / devc->cur_samplerate - 1;
-
- clockselect.async = 0;
- clockselect.fraction = frac;
- clockselect.disabled_probes = 0;
-
- sigma_write_register(WRITE_CLOCK_SELECT,
- (uint8_t *) &clockselect,
- sizeof(clockselect), devc);
- }
-
- /* Setup maximum post trigger time. */
- sigma_set_register(WRITE_POST_TRIGGER,
- (devc->capture_ratio * 255) / 100, devc);
-
- /* Start acqusition. */
- gettimeofday(&devc->start_tv, 0);
- sigma_set_register(WRITE_MODE, 0x0d, devc);
-
- devc->cb_data = cb_data;
-
- /* Send header packet to the session bus. */
- std_session_send_df_header(cb_data, DRIVER_LOG_DOMAIN);
-
- /* Add capture source. */
- sr_source_add(0, G_IO_IN, 10, receive_data, (void *)sdi);
-
- devc->state.state = SIGMA_CAPTURE;
-
- return SR_OK;
-}
-
-static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
-{
- struct dev_context *devc;
- uint8_t modestatus;
-
- (void)cb_data;
-
- sr_source_remove(0);
-
- if (!(devc = sdi->priv)) {
- sr_err("%s: sdi->priv was NULL", __func__);
- return SR_ERR_BUG;
- }
-
- /* Stop acquisition. */
- sigma_set_register(WRITE_MODE, 0x11, devc);
-
- /* Set SDRAM Read Enable. */
- sigma_set_register(WRITE_MODE, 0x02, devc);
-
- /* Get the current position. */
- sigma_read_pos(&devc->state.stoppos, &devc->state.triggerpos, devc);
-
- /* Check if trigger has fired. */
- modestatus = sigma_get_register(READ_MODE, devc);
- if (modestatus & 0x20)
- devc->state.triggerchunk = devc->state.triggerpos / 512;
- else
- devc->state.triggerchunk = -1;
-
- devc->state.chunks_downloaded = 0;
-
- devc->state.state = SIGMA_DOWNLOAD;
-
- return SR_OK;
-}
-
-SR_PRIV struct sr_dev_driver asix_sigma_driver_info = {
- .name = "asix-sigma",
- .longname = "ASIX SIGMA/SIGMA2",
- .api_version = 1,
- .init = hw_init,
- .cleanup = hw_cleanup,
- .scan = hw_scan,
- .dev_list = hw_dev_list,
- .dev_clear = clear_instances,
- .config_get = config_get,
- .config_set = config_set,
- .config_list = config_list,
- .dev_open = hw_dev_open,
- .dev_close = hw_dev_close,
- .dev_acquisition_start = hw_dev_acquisition_start,
- .dev_acquisition_stop = hw_dev_acquisition_stop,
- .priv = NULL,
-};