fx2lafw: Add Braintechnology USB-LPS support.

[sigrok-firmware-fx2lafw.git] / gpif-acquisition.c

diff --git a/gpif-acquisition.c b/gpif-acquisition.c
index 65b44bf9c72da3cb4574d4cf23f130a2ce163f7f..0f9cfbe137197c7eae6b2cf6c308b3dd45989bd0 100644 (file)
--- a/gpif-acquisition.c
+++ b/gpif-acquisition.c
@@ -19,14 +19,16 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
+#include <eputils.h>
 #include <fx2regs.h>
 #include <fx2macros.h>
 #include <delay.h>
 #include <gpif.h>
-
 #include <fx2lafw.h>
 #include <gpif-acquisition.h>
 
+bit gpif_acquiring;
+
 static void gpif_reset_waveforms(void)
 {
        int i;
@@ -68,6 +70,9 @@ static void gpif_setup_registers(void)
 
        /* Contains RDY* pin values. Read-only according to TRM. */
        GPIFREADYSTAT = 0;
+
+       /* Make GPIF stop on transcation count not flag */
+       EP2GPIFPFSTOP = (0 << 0);
 }
 
 static void gpif_init_addr_pins(void)
@@ -122,18 +127,31 @@ void gpif_init_la(void)
 
        /* Initialize flowstate registers (not used by us). */
        gpif_init_flowstates();
+
+       /* Reset the status */
+       gpif_acquiring = FALSE;
 }
 
 void gpif_acquisition_start(const struct cmd_start_acquisition *cmd)
 {
        xdata volatile BYTE *pSTATE;
 
-       IFCONFIG = (IFCONFIG & ~bm3048MHZ) |
-               ((cmd->flags & CMD_START_FLAGS_CLK_48MHZ) ? bm3048MHZ : 0);
+       /* Ensure GPIF is idle before reconfiguration. */
+       while (!(GPIFTRIG & 0x80));
+
+       /* Set IFCONFIG to the correct clock source. */
+       if (cmd->flags & CMD_START_FLAGS_CLK_48MHZ) {
+               IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE | bmASYNC |
+                          bmGSTATE | bmIFGPIF;
+       } else {
+               IFCONFIG = bmIFCLKSRC | bmIFCLKOE | bmASYNC |
+                          bmGSTATE | bmIFGPIF;
+       }
 
        /* GPIF terminology: DP = decision point, NDP = non-decision-point */
 
-       /* Populate WAVEDATA
+       /*
+        * Populate WAVEDATA.
         *
         * This is the basic algorithm implemented in our GPIF state machine:
         *
@@ -148,29 +166,96 @@ void gpif_acquisition_start(const struct cmd_start_acquisition *cmd)
         * State 6: Unused.
         */
 
-       /* Populate S0 */
+       /* Populate S0. */
        pSTATE = &GPIF_WAVE_DATA;
+
+       /*
+        * DELAY
+        * Delay cmd->sample_delay clocks.
+        */
        pSTATE[0] = cmd->sample_delay;
+
+       /*
+        * OPCODE
+        * SGL=0, GIN=0, INCAD=0, NEXT=0, DATA=1, DP=0
+        * Collect data in this state.
+        */
        pSTATE[8] = 0x02;
+
+       /*
+        * OUTPUT
+        * OE[0:3]=0, CTL[0:3]=0
+        */
        pSTATE[16] = 0x00;
+
+       /*
+        * LOGIC FUNCTION
+        * Not used.
+        */
        pSTATE[24] = 0x00;
 
-       /* Populate S1 */
+       /* Populate S1 - the decision point. */
        pSTATE = &GPIF_WAVE_DATA + 1;
-       pSTATE[0] = 0x00;
-       pSTATE[8] = 0x01;
-       pSTATE[16] = 0x00;
-       pSTATE[24] = 0x36;
 
-       /* Populate Reserved Words */
-       pSTATE = &GPIF_WAVE_DATA + 7;
-       pSTATE[0] = 0x07;
-       pSTATE[8] = 0x00;
+       /*
+        * BRANCH
+        * Branch to IDLE if condition is true, back to S0 otherwise.
+        */
+       pSTATE[0] = (7 << 3) | (0 << 0);
+
+       /*
+        * OPCODE
+        * SGL=0, GIN=0, INCAD=0, NEXT=0, DATA=0, DP=1
+        */
+       pSTATE[8] = (1 << 0);
+
+       /*
+        * OUTPUT
+        * OE[0:3]=0, CTL[0:3]=0
+        */
        pSTATE[16] = 0x00;
-       pSTATE[24] = 0x3f;
 
-       SYNCDELAY();
+       /*
+        * LOGIC FUNCTION
+        * Evaluate if the FIFO full flag is set.
+        * LFUNC=0 (AND), TERMA=6 (FIFO Flag), TERMB=6 (FIFO Flag)
+        */
+       pSTATE[24] = (6 << 3) | (6 << 0);
+
+       /* Execute the whole GPIF waveform once. */
+       gpif_set_tc16(1);
 
        /* Perform the initial GPIF read. */
        gpif_fifo_read(GPIF_EP2);
+
+       /* Update the status. */
+       gpif_acquiring = TRUE;
+}
+
+void gpif_poll(void)
+{
+       /* Detect if acquisition has completed. */
+       if (gpif_acquiring && (GPIFTRIG & 0x80)) {
+               /* Activate NAK-ALL to avoid race conditions. */
+               FIFORESET = 0x80;
+               SYNCDELAY();
+
+               /* Switch to manual mode. */
+               EP2FIFOCFG = 0;
+               SYNCDELAY();
+
+               /* Reset EP2. */
+               FIFORESET = 0x02;
+               SYNCDELAY();
+
+               /* Return to auto mode. */
+               EP2FIFOCFG = bmAUTOIN;
+               SYNCDELAY();
+
+               /* Release NAK-ALL. */
+               FIFORESET = 0x00;
+               SYNCDELAY();
+
+               gpif_acquiring = FALSE;
+       }
 }