+0.2.2 (2013-11-04)
+------------------
+
+Note: This release does NOT change the libsigrok API. While new config keys,
+ config info types, and unit codes have been added (additional enum
+ entries / numbers), no existing interfaces were added/changed/removed.
+ Frontends should continue to work fine without recompiling or relinking.
+
+ * New supported hardware:
+ - Logic analyzers:
+ - Saleae Logic16
+ - Thermometers:
+ - Center 309
+ - UNI-T UT325
+ - Voltcraft K204
+ - Multimeters:
+ - ISOTECH IDM103N
+ - Metex M-4650CR
+ - Norma DM950
+ - Voltcraft M-4650CR
+ - Energy meters:
+ - EDF Teleinfo
+ * New config keys:
+ - SR_CONF_VOLTAGE_THRESHOLD
+ - SR_CONF_EXTERNAL_CLOCK
+ - SR_CONF_SWAP
+ - SR_CONF_ENERGYMETER
+ * New config info types:
+ - SR_T_DOUBLE_RANGE
+ * New units:
+ - SR_UNIT_REVOLUTIONS_PER_MINUTE
+ - SR_UNIT_VOLT_AMPERE
+ - SR_UNIT_WATT
+ - SR_UNIT_WATT_HOUR
+ * New input modules:
+ - csv (comma-separated values)
+ * Bump required libzip version to >= 0.10.
+ * uni-t-dmm: This driver now requires the specification of the USB VID/PID
+ of the cable that is used. Example for sigrok-cli:
+ - Old: sigrok-cli --driver voltcraft-vc820 ...
+ - New: sigrok-cli --driver voltcraft-vc820:conn=1a86.e008 ...
+ * openbench-logic-sniffer:
+ - Initial test pattern support (SR_CONF_PATTERN_MODE).
+ - Initial external clock support (SR_CONF_EXTERNAL_CLOCK).
+ - Initial channel swap support (SR_CONF_SWAP).
+ - Various minor fixes and improvements.
+ * When a frontend adds a device instance to a running session, start
+ acquisition on it. This helps with the collectd use-case where devices
+ can be removed and added dynamically while a session is running.
+ * rigol-ds1xx2: Support newer Linux kernels with USBTMC in /sys/class/usbmisc.
+ * rigol-ds1xx2: Also detect the Rigol DS1152E/DS1152D.
+ * agilent-dmm: Fix a segfault happening in certain cases.
+ * output/analog: Support all currently known MQFLAGs.
+ * Fix a minor compile issue due to an incorrect #include.
+ * Fix two compile issues on FreeBSD (bug #185).
+ * es519xx: New generic parser for various Cyrustek DMM ICs.
+ * es51922/fs9721/fs9922/metex14: Use diode MQFLAG (bug #141).
+ * voltcraft-vc830: Fix diode mode handling (bug #142).
+ * Add the missing HACKING file to the tarball.
+ * README.devices: Updates/notes for newly added devices.
+
+0.2.1 (2013-08-07)
+------------------
+
+Note: This release does NOT change the libsigrok API. While new config keys,
+ config info types, and error codes have been added (additional enum
+ entries / numbers), no existing interfaces were added/changed/removed.
+ Frontends should continue to work fine without recompiling or relinking.
+
+ * New supported hardware:
+ - Logic analyzers:
+ - IKALOGIC Scanalogic-2
+ - IKALOGIC ScanaPLUS
+ - Sound level meters:
+ - CEM DT-8852
+ - Kecheng KC-330B
+ - Multimeters:
+ - UNI-T UT60A
+ - UNI-T UT60E
+ - Voltcraft M-3650D
+ - Voltcraft VC-830
+ * Drop the Tecpel DMM-8060 (doesn't have PC connectivity).
+ * New config keys:
+ - SR_CONF_SPL_WEIGHT_FREQ
+ - SR_CONF_SPL_WEIGHT_TIME
+ - SR_CONF_SPL_MEASUREMENT_RANGE
+ - SR_CONF_HOLD_MIN
+ - SR_CONF_HOLD_MAX
+ - SR_CONF_POWER_OFF
+ - SR_CONF_DATA_SOURCE
+ * New config info types:
+ - SR_T_UINT64_RANGE
+ * New error codes:
+ - SR_ERR_TIMEOUT
+ * Always link against libm, the math library (bug #115).
+ * Fix a bug in sr_si_string_u64() at al (bug #73).
+ * output/csv: Fix incorrect probe order.
+ * alsa: Fix a double-free issue (bug #129).
+ * zeroplus-logic-cube: Fix a bug in the driver cleanup code.
+ * ikalogic-scanalogic2: Use GET_REPORT (bug #130).
+ * uni-t-dmm: Fix a bug breaking the UNI-T UT61E (bug #136).
+ * Various internal consistency fixes and code cleanups.
+ * Improved Doxygen documentation.
+ * Fixed various memory leaks.
+
0.2.0 (2013-05-04)
------------------