+static int hp_6630a_init_acquisition(const struct sr_dev_inst *sdi)
+{
+ struct sr_scpi_dev_inst *scpi;
+
+ scpi = sdi->conn;
+
+ /*
+ * Monitor CV (1), CC+ (2), UR (4), OVP (8), OTP (16), OCP (64) and
+ * CC- (256) bits of the Status Register for the FAULT? query.
+ */
+ return sr_scpi_send(scpi, "UNMASK 607");
+}
+
+static int hp_6630a_update_status(const struct sr_dev_inst *sdi)
+{
+ struct sr_scpi_dev_inst *scpi;
+ int ret;
+ int fault;
+ gboolean cv, cc_pos, unreg, cc_neg;
+ gboolean regulation_changed;
+ char *regulation;
+
+ scpi = sdi->conn;
+
+ /*
+ * Use the FAULT register (only 0->1 transitions), this way multiple set
+ * regulation bits in the STS/ASTS registers are ignored. In rare cases
+ * we will miss some changes (1->0 transitions, e.g. no regulation at all),
+ * but SPS/ASPS doesn't work either, unless all states are stored and
+ * compared to the states in STS/ASTS.
+ * TODO: Use SPoll or SRQ when SCPI over GPIB is used.
+ */
+ ret = sr_scpi_get_int(scpi, "FAULT?", &fault);
+ if (ret != SR_OK)
+ return ret;
+
+ /* OVP */
+ if (fault & (1 << 3))
+ sr_session_send_meta(sdi, SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE,
+ g_variant_new_boolean(fault & (1 << 3)));
+
+ /* OCP */
+ if (fault & (1 << 6))
+ sr_session_send_meta(sdi, SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE,
+ g_variant_new_boolean(fault & (1 << 6)));
+
+ /* OTP */
+ if (fault & (1 << 4))
+ sr_session_send_meta(sdi, SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE,
+ g_variant_new_boolean(fault & (1 << 4)));
+
+ /* CV */
+ cv = (fault & (1 << 0));
+ regulation_changed = (fault & (1 << 0));
+ /* CC+ */
+ cc_pos = (fault & (1 << 1));
+ regulation_changed = (fault & (1 << 1)) | regulation_changed;
+ /* UNREG */
+ unreg = (fault & (1 << 2));
+ regulation_changed = (fault & (1 << 2)) | regulation_changed;
+ /* CC- */
+ cc_neg = (fault & (1 << 9));
+ regulation_changed = (fault & (1 << 9)) | regulation_changed;
+
+ if (regulation_changed) {
+ if (cv && !cc_pos && !cc_neg && !unreg)
+ regulation = "CV";
+ else if (cc_pos && !cv && !cc_neg && !unreg)
+ regulation = "CC";
+ else if (cc_neg && !cv && !cc_pos && !unreg)
+ regulation = "CC-";
+ else if (unreg && !cv && !cc_pos && !cc_neg)
+ regulation = "UR";
+ else if (!cv && !cc_pos && !cc_neg && !unreg)
+ regulation = "";
+ else {
+ sr_dbg("Undefined regulation for HP 66xxA "
+ "(CV=%i, CC+=%i, CC-=%i, UR=%i).",
+ cv, cc_pos, cc_neg, unreg);
+ return FALSE;
+ }
+ sr_session_send_meta(sdi, SR_CONF_REGULATION,
+ g_variant_new_string(regulation));
+ }
+
+ return SR_OK;
+}
+
+/* HP 663xB series */
+static const uint32_t hp_6630b_devopts[] = {
+ SR_CONF_CONTINUOUS,
+ SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
+ SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
+};
+
+static const uint32_t hp_6630b_devopts_cg[] = {
+ SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
+ SR_CONF_VOLTAGE | SR_CONF_GET,
+ SR_CONF_CURRENT | SR_CONF_GET,
+ SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
+ SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
+ SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET,
+ SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET,
+ SR_CONF_REGULATION | SR_CONF_GET,
+};
+
+static const struct channel_spec hp_6611c_ch[] = {
+ { "1", { 0, 8.19, 0.002, 3, 4 }, { 0, 5.1188, 0.00125, 4, 5 }, { 0, 41.92297 }, FREQ_DC_ONLY, { 0, 12, 0.06 }, NO_OCP_LIMITS },
+};
+
+static const struct channel_spec hp_6612c_ch[] = {
+ { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 2.0475, 0.0005, 4, 5 }, { 0, 41.92256 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS },
+};
+
+static const struct channel_spec hp_6613c_ch[] = {
+ { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 1.0238, 0.00025, 4, 5 }, { 0, 52.40627 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS },
+};
+
+static const struct channel_spec hp_6614c_ch[] = {
+ { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 0.5118, 0.000125, 4, 5 }, { 0, 52.39808 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS },
+};
+
+static const struct channel_spec hp_6631b_ch[] = {
+ { "1", { 0, 8.19, 0.002, 3, 4 }, { 0, 10.237, 0.00263, 4, 5 }, { 0, 83.84103 }, FREQ_DC_ONLY, { 0, 12, 0.06 }, NO_OCP_LIMITS },
+};
+
+static const struct channel_spec hp_6632b_ch[] = {
+ { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS },
+};
+
+static const struct channel_spec hp_66312a_ch[] = {
+ { "1", { 0, 20.475, 0.0001, 4, 5 }, { 0, 2.0475, 0.0001, 4, 5 }, { 0, 41.92256 }, FREQ_DC_ONLY, { 0, 22, 0.01 }, NO_OCP_LIMITS },
+};
+
+static const struct channel_spec hp_66332a_ch[] = {
+ { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS },
+};
+
+static const struct channel_spec hp_6633b_ch[] = {
+ { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 2.0475, 0.000526, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS },
+};
+
+static const struct channel_spec hp_6634b_ch[] = {
+ { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 1.0238, 0.000263, 4, 5 }, { 0, 104.81664 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS },
+};
+
+static const struct channel_group_spec hp_6630b_cg[] = {
+ { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
+};
+
+static const struct scpi_command hp_6630b_cmd[] = {
+ /*
+ * SCPI_CMD_REMOTE and SCPI_CMD_LOCAL are not used when GPIB is used,
+ * otherwise the device will report (non critical) error 602.
+ */