+
+
+Probing
+-------
+
+The flashrom command line used was:
+
+ flashrom -p ft2232_spi:type=2232H,port=A
+
+The sigrok command line used was:
+
+ sigrok-cli -d 0:samplerate=25mhz --samples 8388608 \
+ -p '1=CS#,2=MISO,3=SCLK,4=MOSI,5=WP#,6=HOLD#' \
+ --wait-trigger --triggers 3=1 \
+ -o mx25l1605d_probe.sr
+
+The capturing starts when the SCLK signal is high for the first time
+(it's low per default). We capture as many samples as fit into the 8MByte
+buffer of the logic analyzer.
+
+The capture might not contain the complete flashrom chip detection sequence.
+
+
+Writing
+-------
+
+The flashrom command line used was:
+
+ flashrom -p ft2232_spi:type=2232H,port=A -w filename
+
+where 'filename' is a 2MByte file filled with lots of consecutive "HelloWorld"
+ASCII character strings.
+
+The sigrok command line used was:
+
+ sigrok-cli -d 0:samplerate=25mhz --samples 8388608 \
+ -p '1=CS#,2=MISO,3=SCLK,4=MOSI,5=WP#,6=HOLD#' \
+ -o mx25l1605d_write.sr