+ data.term.c_oflag &= ~(OPOST | ONLCR | OCRNL | ONOCR | ONLRET);
+#ifdef OLCUC
+ data.term.c_oflag &= ~OLCUC;
+#endif
+#ifdef NLDLY
+ data.term.c_oflag &= ~NLDLY;
+#endif
+#ifdef CRDLY
+ data.term.c_oflag &= ~CRDLY;
+#endif
+#ifdef TABDLY
+ data.term.c_oflag &= ~TABDLY;
+#endif
+#ifdef BSDLY
+ data.term.c_oflag &= ~BSDLY;
+#endif
+#ifdef VTDLY
+ data.term.c_oflag &= ~VTDLY;
+#endif
+#ifdef FFDLY
+ data.term.c_oflag &= ~FFDLY;
+#endif
+#ifdef OFILL
+ data.term.c_oflag &= ~OFILL;
+#endif
+ data.term.c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN);
+ data.term.c_cc[VMIN] = 0;
+ data.term.c_cc[VTIME] = 0;
+
+ /* Ignore modem status lines; enable receiver; leave control lines alone on close. */
+ data.term.c_cflag |= (CLOCAL | CREAD | HUPCL);
+#endif
+
+#ifdef _WIN32
+ if (ClearCommError(port->hdl, &errors, &status) == 0)
+ RETURN_FAIL("ClearCommError() failed");
+#endif
+
+ ret = set_config(port, &data, &config);
+
+ if (ret < 0) {
+ sp_close(port);
+ RETURN_CODEVAL(ret);
+ }
+
+ RETURN_OK();
+}
+
+SP_API enum sp_return sp_close(struct sp_port *port)
+{
+ TRACE("%p", port);
+
+ CHECK_OPEN_PORT();
+
+ DEBUG_FMT("Closing port %s", port->name);
+
+#ifdef _WIN32
+ /* Returns non-zero upon success, 0 upon failure. */
+ if (CloseHandle(port->hdl) == 0)
+ RETURN_FAIL("port CloseHandle() failed");
+ port->hdl = INVALID_HANDLE_VALUE;
+
+ /* Close event handles for overlapped structures. */
+#define CLOSE_OVERLAPPED(ovl) do { \
+ if (port->ovl.hEvent != INVALID_HANDLE_VALUE && \
+ CloseHandle(port->ovl.hEvent) == 0) \
+ RETURN_FAIL(# ovl "event CloseHandle() failed"); \
+} while (0)
+ CLOSE_OVERLAPPED(read_ovl);
+ CLOSE_OVERLAPPED(write_ovl);
+ CLOSE_OVERLAPPED(wait_ovl);
+
+#else
+ /* Returns 0 upon success, -1 upon failure. */
+ if (close(port->fd) == -1)
+ RETURN_FAIL("close() failed");
+ port->fd = -1;
+#endif
+
+ RETURN_OK();
+}
+
+SP_API enum sp_return sp_flush(struct sp_port *port, enum sp_buffer buffers)
+{
+ TRACE("%p, 0x%x", port, buffers);
+
+ CHECK_OPEN_PORT();
+
+ if (buffers > SP_BUF_BOTH)
+ RETURN_ERROR(SP_ERR_ARG, "Invalid buffer selection");
+
+ const char *buffer_names[] = {"no", "input", "output", "both"};
+
+ DEBUG_FMT("Flushing %s buffers on port %s",
+ buffer_names[buffers], port->name);
+
+#ifdef _WIN32
+ DWORD flags = 0;
+ if (buffers & SP_BUF_INPUT)
+ flags |= PURGE_RXCLEAR;
+ if (buffers & SP_BUF_OUTPUT)
+ flags |= PURGE_TXCLEAR;
+
+ /* Returns non-zero upon success, 0 upon failure. */
+ if (PurgeComm(port->hdl, flags) == 0)
+ RETURN_FAIL("PurgeComm() failed");
+#else
+ int flags = 0;
+ if (buffers & SP_BUF_BOTH)
+ flags = TCIOFLUSH;
+ else if (buffers & SP_BUF_INPUT)
+ flags = TCIFLUSH;
+ else if (buffers & SP_BUF_OUTPUT)
+ flags = TCOFLUSH;
+
+ /* Returns 0 upon success, -1 upon failure. */
+ if (tcflush(port->fd, flags) < 0)
+ RETURN_FAIL("tcflush() failed");
+#endif
+ RETURN_OK();
+}
+
+SP_API enum sp_return sp_drain(struct sp_port *port)
+{
+ TRACE("%p", port);
+
+ CHECK_OPEN_PORT();
+
+ DEBUG_FMT("Draining port %s", port->name);
+
+#ifdef _WIN32
+ /* Returns non-zero upon success, 0 upon failure. */
+ if (FlushFileBuffers(port->hdl) == 0)
+ RETURN_FAIL("FlushFileBuffers() failed");
+ RETURN_OK();
+#else
+ int result;
+ while (1) {
+#ifdef __ANDROID__
+ int arg = 1;
+ result = ioctl(port->fd, TCSBRK, &arg);