static const struct fx2lafw_profile supported_fx2[] = {
/*
* CWAV USBee AX
- * EE Electronics ESLA201A
- * ARMFLY AX-Pro
+ * ARMFLY AX-Pro (clone of the CWAV USBee AX)
+ * ARMFLY Mini-Logic (clone of the CWAV USBee AX)
+ * EE Electronics ESLA201A (clone of the CWAV USBee AX)
+ * HT USBee-AxPro (clone of the CWAV USBee AX)
+ * MCU123 USBee AX Pro clone (clone of the CWAV USBee AX)
+ * Noname LHT00SU1 (clone of the CWAV USBee AX)
+ * XZL_Studio AX (clone of the CWAV USBee AX)
*/
{ 0x08a9, 0x0014, "CWAV", "USBee AX", NULL,
"fx2lafw-cwav-usbeeax.fw",
DEV_CAPS_AX_ANALOG, NULL, NULL},
+
/*
* CWAV USBee DX
- * XZL-Studio DX
+ * HT USBee-DxPro (clone of the CWAV USBee DX), not yet supported!
+ * XZL-Studio DX (clone of the CWAV USBee DX)
*/
{ 0x08a9, 0x0015, "CWAV", "USBee DX", NULL,
"fx2lafw-cwav-usbeedx.fw",
/*
* Saleae Logic
- * EE Electronics ESLA100
- * Robomotic MiniLogic
- * Robomotic BugLogic 3
+ * EE Electronics ESLA100 (clone of the Saleae Logic)
+ * Hantek 6022BL in LA mode (clone of the Saleae Logic)
+ * Instrustar ISDS205X in LA mode (clone of the Saleae Logic)
+ * Robomotic MiniLogic (clone of the Saleae Logic)
+ * Robomotic BugLogic 3 (clone of the Saleae Logic)
+ * MCU123 Saleae Logic clone (clone of the Saleae Logic)
*/
{ 0x0925, 0x3881, "Saleae", "Logic", NULL,
"fx2lafw-saleae-logic.fw",
* Default Cypress FX2 without EEPROM, e.g.:
* Lcsoft Mini Board
* Braintechnology USB Interface V2.x
+ * fx2grok-tiny
*/
{ 0x04B4, 0x8613, "Cypress", "FX2", NULL,
"fx2lafw-cypress-fx2.fw",
/*
* sigrok FX2 based 8-channel logic analyzer
+ * fx2grok-flat (before and after renumeration)
*/
{ 0x1d50, 0x608c, "sigrok", "FX2 LA (8ch)", NULL,
"fx2lafw-sigrok-fx2-8ch.fw",
continue;
}
- usb_get_port_path(devlist[i], connection_id, sizeof(connection_id));
-
libusb_close(hdl);
+ if (usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)) < 0)
+ continue;
+
prof = NULL;
for (j = 0; supported_fx2[j].vid; j++) {
if (des.idVendor == supported_fx2[j].vid &&
libusb_get_device_address(devlist[i]), NULL);
} else {
if (ezusb_upload_firmware(drvc->sr_ctx, devlist[i],
- USB_CONFIGURATION, prof->firmware) == SR_OK)
+ USB_CONFIGURATION, prof->firmware) == SR_OK) {
/* Store when this device's FW was updated. */
devc->fw_updated = g_get_monotonic_time();
- else
+ } else {
sr_err("Firmware upload failed for "
- "device %d.%d (logical).",
+ "device %d.%d (logical), name %s.",
libusb_get_bus_number(devlist[i]),
- libusb_get_device_address(devlist[i]));
+ libusb_get_device_address(devlist[i]),
+ prof->firmware);
+ }
sdi->inst_type = SR_INST_USB;
sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]),
0xff, NULL);
switch (key) {
case SR_CONF_SCAN_OPTIONS:
case SR_CONF_DEVICE_OPTIONS:
+ if (cg)
+ return SR_ERR_NA;
return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts);
case SR_CONF_SAMPLERATE:
+ if (!devc)
+ return SR_ERR_NA;
*data = std_gvar_samplerates(devc->samplerates, devc->num_samplerates);
break;
case SR_CONF_TRIGGER_MATCH: