return SR_OK;
/* Bytes 2-8: Sign, value (up to 5 digits) and decimal point */
- sscanf((const char *)&valstr, "%f", result);
+ sr_atof_ascii((const char *)&valstr, result);
dot_pos = strcspn(valstr, ".");
if (dot_pos < cnt)
info->is_kilo = info->is_hertz = TRUE;
else if (!g_ascii_strcasecmp(u, "C"))
info->is_celsius = TRUE;
+ else if (!g_ascii_strcasecmp(u, "F"))
+ info->is_fahrenheit = TRUE;
else if (!g_ascii_strcasecmp(u, "DB"))
info->is_decibel = TRUE;
+ else if (!g_ascii_strcasecmp(u, "dBm"))
+ info->is_decibel_mw = TRUE;
+ else if (!g_ascii_strcasecmp(u, "W"))
+ info->is_watt = TRUE;
else if (!g_ascii_strcasecmp(u, ""))
info->is_unitless = TRUE;
(!strncmp(buf, " ", 2) && info->is_ohm);
info->is_capacity = !strncmp(buf, "CA", 2) ||
(!strncmp(buf, " ", 2) && info->is_farad);
- info->is_temperature = !strncmp(buf, "TE", 2);
+ info->is_temperature = !strncmp(buf, "TE", 2) ||
+ info->is_celsius || info->is_fahrenheit;
info->is_diode = !strncmp(buf, "DI", 2) ||
(!strncmp(buf, " ", 2) && info->is_volt && info->is_milli);
info->is_frequency = !strncmp(buf, "FR", 2) ||
(!strncmp(buf, " ", 2) && info->is_hertz);
- info->is_gain = !strncmp(buf, "DB", 2);
+ info->is_gain = !strncmp(buf, "DB", 2) && info->is_decibel;
+ info->is_power = (!strncmp(buf, "dB", 2) && info->is_decibel_mw) ||
+ ((!strncmp(buf, "WT", 2) && info->is_watt));
+ info->is_power_factor = !strncmp(buf, "CO", 2) && info->is_unitless;
info->is_hfe = !strncmp(buf, "HF", 2) ||
- (!strncmp(buf, " ", 2) && !info->is_volt && !info->is_ohm &&
- !info->is_logic && !info->is_farad && !info->is_hertz);
+ (!strncmp(buf, " ", 2) && !info->is_ampere &&!info->is_volt &&
+ !info->is_resistance && !info->is_capacity && !info->is_frequency &&
+ !info->is_temperature && !info->is_power && !info->is_power_factor &&
+ !info->is_gain && !info->is_logic && !info->is_diode);
+ info->is_min = !strncmp(buf, "MN", 2);
+ info->is_max = !strncmp(buf, "MX", 2);
+ info->is_avg = !strncmp(buf, "AG", 2);
+
/*
* Note:
* - Protocol doesn't distinguish "resistance" from "beep" mode.
static void handle_flags(struct sr_datafeed_analog *analog, float *floatval,
int *exponent, const struct metex14_info *info)
{
- int factor = 0;
+ int factor;
+
+ (void)exponent;
+
/* Factors */
+ factor = 0;
if (info->is_pico)
factor -= 12;
if (info->is_nano)
if (info->is_mega)
factor += 6;
*floatval *= powf(10, factor);
- *exponent += factor;
/* Measurement modes */
if (info->is_volt) {
analog->meaning->mq = SR_MQ_CAPACITANCE;
analog->meaning->unit = SR_UNIT_FARAD;
}
- if (info->is_celsius) {
+ if (info->is_temperature) {
analog->meaning->mq = SR_MQ_TEMPERATURE;
- analog->meaning->unit = SR_UNIT_CELSIUS;
+ if (info->is_celsius)
+ analog->meaning->unit = SR_UNIT_CELSIUS;
+ else if (info->is_fahrenheit)
+ analog->meaning->unit = SR_UNIT_FAHRENHEIT;
+ else
+ analog->meaning->unit = SR_UNIT_UNITLESS;
}
if (info->is_diode) {
analog->meaning->mq = SR_MQ_VOLTAGE;
analog->meaning->unit = SR_UNIT_VOLT;
}
+ if (info->is_power) {
+ analog->meaning->mq = SR_MQ_POWER;
+ if (info->is_decibel_mw)
+ analog->meaning->unit = SR_UNIT_DECIBEL_MW;
+ else if (info->is_watt)
+ analog->meaning->unit = SR_UNIT_WATT;
+ else
+ analog->meaning->unit = SR_UNIT_UNITLESS;
+ }
+ if (info->is_power_factor) {
+ analog->meaning->mq = SR_MQ_POWER_FACTOR;
+ analog->meaning->unit = SR_UNIT_UNITLESS;
+ }
if (info->is_gain) {
analog->meaning->mq = SR_MQ_GAIN;
analog->meaning->unit = SR_UNIT_DECIBEL_VOLT;
if (info->is_dc)
analog->meaning->mqflags |= SR_MQFLAG_DC;
if (info->is_diode)
- analog->meaning->mqflags |= SR_MQFLAG_DIODE;
+ analog->meaning->mqflags |= SR_MQFLAG_DIODE | SR_MQFLAG_DC;
+ if (info->is_min)
+ analog->meaning->mqflags |= SR_MQFLAG_MIN;
+ if (info->is_max)
+ analog->meaning->mqflags |= SR_MQFLAG_MAX;
+ if (info->is_avg)
+ analog->meaning->mqflags |= SR_MQFLAG_AVG;
}
static gboolean flags_valid(const struct metex14_info *info)
return TRUE;
}
+SR_PRIV gboolean sr_metex14_4packets_valid(const uint8_t *buf)
+{
+ struct metex14_info info;
+ size_t ch_idx;
+ const uint8_t *ch_buf;
+
+ ch_buf = buf;
+ for (ch_idx = 0; ch_idx < 4; ch_idx++) {
+ if (ch_buf[13] != '\r')
+ return FALSE;
+ memset(&info, 0x00, sizeof(info));
+ parse_flags((const char *)ch_buf, &info);
+ if (!flags_valid(&info))
+ return FALSE;
+ ch_buf += METEX14_PACKET_SIZE;
+ }
+ return TRUE;
+}
+
/**
* Parse a protocol packet.
*
int ret, exponent = 0;
struct metex14_info *info_local;
- info_local = (struct metex14_info *)info;
+ info_local = info;
/* Don't print byte 13. That one contains the carriage return. */
sr_dbg("DMM packet: \"%.13s\"", buf);
return SR_OK;
}
+
+/**
+ * Parse one out of four values of a four-display Metex14 variant.
+ *
+ * The caller's 'info' parameter can be used to track the channel index,
+ * as long as the information is kept across calls to the 14-byte packet
+ * parse routine (which clears the 'info' container).
+ *
+ * Since analog values have further details in the 'analog' parameter,
+ * passing multiple values per parse routine call is problematic. So we
+ * prefer the approach of passing one value per call, which is most
+ * reliable and shall fit every similar device with multiple displays.
+ *
+ * The meters which use this parse routine send one 14-byte packet per
+ * display. Each packet has the regular Metex14 layout.
+ */
+SR_PRIV int sr_metex14_4packets_parse(const uint8_t *buf, float *floatval,
+ struct sr_datafeed_analog *analog, void *info)
+{
+ struct metex14_info *info_local;
+ size_t ch_idx;
+ const uint8_t *ch_buf;
+ int rc;
+
+ info_local = info;
+ ch_idx = info_local->ch_idx;
+ ch_buf = buf + ch_idx * METEX14_PACKET_SIZE;
+ rc = sr_metex14_parse(ch_buf, floatval, analog, info);
+ info_local->ch_idx = ch_idx + 1;
+ return rc;
+}